2019 Ford F-250 Super Duty Fuel and Emissions Systems

Name: Air Mass Sensor, Remanufactured
Brand: Motorcraft
SKU: B3150396942MTR
Price: 191.80 USD

Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 2019 F-250 Super Duty. Advance Auto Parts has popular F-250 Super Duty parts like Gas Caps, Fuel Pumps, Air Flow Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other F-250 Super Duty model years including 2014, 2015, 2016, 2017, 2018, 2020, 2021, 2022, 2023 and more. Select a category of 2019 Ford F-250 Super Duty Fuel and Emissions Systems below and start saving instantly.

Popular 2019 Ford F-250 Super Duty Fuel and Emissions Systems Categories

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Fuel Pressure Sensors

Air Flow Meters and Mass Air

EGR Pressure Feedback Sensors

Gas Caps

Fuel Pumps

Oxygen Sensors

Vapor Canister Purge Valves

Vapor Canister Vent Solenoids

Fuel Injection Pumps

Fuel Injection Pressure Sensors

MAP-Barometric Pressures

Manifold Air Pressure Sensors

Canister Purge Solenoids

Fuel Injectors

Vapor Canisters

EGR Coolers

Injection Pressure Regulating Valves

Pressure Regulators

Air Charge Temperature Sensors

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Fuel Injector Gaskets

Fuel Tank Lock Rings

Fuel Injection Harness Connectors

Diesel Fuel Injector Lines

EGR Tubes

EGR Valve Gaskets

EGR Gasket Sets

Fuel Cap Tester Adapters

Exh Gas Recirculation (EGR) Tube Connector Gaskets

Essential Fuel and Emissions Systems for 2019 Ford F-250 Super Duties

from

$191.80

Whether you’re looking for an original equipment part or a high-quality, vehicle-specific replacement part for a Ford or Lincoln, we have you covered. Every Motorcraft part is recommended by Ford Motor Company and features the trusted Ford Parts or Motorcraft® brand name.

Product Features:

Units come ready to “plug and play,” with no need for modifications
Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
Tight tolerance ranges help minimize repeat repairs and false “Check Engine” warnings
Design includes OE innovations and upgrades

from

$232.99

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:

Original equipment fit, form and function
Manufactured to precise OE performance specifications

from

$1387.99

100% of pumps are end of line tested using the exact OE test specifications and equipment
Manufactured with the latest OE updates, so they can often be superior to the parts they replace
Manufactured using all OE tools and processes
Guaranteed to provide OE performance

from

$11.49

None

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$53.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

Bosch OE quality pressure sensors for accurate measurements
Bosch OE quality pressure sensors for long term stability
Bosch OE quality pressure sensors with a short response time
Bosch OE quality pressure sensors with improved media resistance

from

$48.99

PIPE – FUEL

from

$133.99

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$63.14

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$33.76

Ambient Temp Sensor

from

$87.99

A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part.
Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank.
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience

from

$164.62

Oxygen Sensor

from

$89.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$80.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$141.99

Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$124.99

Tight seals are essential to proper EGR cooler operation. This EGR cooler gasket kit contains all the gaskets and seals required to ensure a solid repair. Made of quality materials, this kit is a direct replacement for original equipment parts.

Product Features:

Direct replacement – this exhaust gas recirculation (EGR) gasket kit matches the original equipment gaskets for this vehicle application.
Durable construction – the components in this EGR cooler gasket kit are made of quality materials for a secure fit and excellent durability.
Convenient solution – the gaskets in this kit should be replaced whenever repairs are performed on the EGR cooler, intake manifold or oil cooler
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$88.99

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$104.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$435.99

No Core Charge! No Core Exchange!: aFe Power is proud to introduce the square body direct replacement EGR Cooler for 2004-2007 V8-6.0L (td) Ford Power Stroke trucks. This EGR Cooler is a 100% new unit, not remanufactured. The cooler utilizes a thicker wall to extend life and resist failure. The unit is TIG welded and pressure tested at the factory. aFe simplifies the buying experience by not requiring a core charge nor a core exchange fee. New Construction: aFe EGR coolers are constructed from new stainless steel components. All connections are welded not brazed, for reliability. Direct-Flow Design: Thicker wall tubes resist clogging, resulting in extended life of the cooler. The heat exchanger tube wall thickness is more than twice as thick as the OE unit. Gasket Kit: The complete gasket kit includes all required components for the removal and replacement of the EGR cooler, Sold Separately. Also Fits: Ford Excursion 04-05 V8-6.0L (td). Emissions Disclaimer: This product does not require a CARB EO#.

Product Features:

Improved Direct-Flow Design Prevents Failures
All New Construction; Not A Repaired/Refurbished Unit
All Connections Are Welded Not Brazed
Pressure Tested

from

$573.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$101.99

The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft Emissions components are designed and tested to Ford’s rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.

from

$94.99

from

$117.99

from

$249.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.

Product Features:

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.
End of line testing using the exact OE test specifications.
Guaranteed to provide OE performance and meet all emission specifications.
Continuous improvement, remanufactured with the latest upgrades to components and specifications.

from

$8.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$37.99

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed.
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations

from

$4.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

Upgrade your 2019 Ford F-250 Super Duty with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2019 Ford F-250 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your F-250 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 86 Fuel and Emissions Systems for the 2019 Ford F-250 Super Duty, designed to meet your needs without breaking the bank. From Gas Cap replacements to Fuel Pumps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2019 Ford F-250 Super Duty at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $5.49 to $1,361.99, with an average price of $130.68. Our 86 Fuel and Emissions Systems in stock come from 13 trusted brands, so you’re sure to find the right part for your 2019 Ford F-250 Super Duty without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2019 Ford F-250 Super Duty, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like FELPRO, Hitachi, Carquest Premium, and more. FELPRO Fuel and Emissions Systems start at just $5.49 and boast an impressive 5 stars average rating from customers. Hitachi and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $8.29, and at an average 5 stars rating. With 1,200 customer reviews and counting, our 2019 Ford F-250 Super Duty Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2019 Ford F-250 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your F-250 Super Duty in top shape, all in one place. Start shopping confidently below for your 2019 Ford F-250 Super Duty!

Best-Selling Gas Caps for 2019 Ford F-250 Super Duties

Enhance the driving experience in your Ford with 11 quality Gas Cap components, starting at $18.29.

show more show less

from

$19.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$32.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$25.99

None

Product Features:

Independently tested for emission control
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$30.49

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$24.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$18.29

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$26.05

Fuel Tank Cap

from

$34.86

With Retaining Straps Motorcraft offers a wide variety of caps to support the ongoing maintenance needs of Ford and Lincoln vehicles.

Product Features:

Motorcraft provides extensive coverage of these caps
Available for most Ford and Lincoln vehicles
Locking sets are offered for dual-tank applications that contain two matching caps with four keys
Both locking- and non-locking styles are available

from

$23.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$23.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Most Popular 2019 Ford F-250 Super Duty Fuel Pumps

Customize your Ford with 6 Fuel Pumps products like Fuel Pumps, Fuel Injection Pumps, and Fuel Cap Tester Adapters, all priced under $1,361.99.

show more show less

from

$1361.99

Product Features:

Each unit is 100% tested to OE specifications

from

$914.55

FUEL PUMP ASSEMBLY

from

$914.55

FUEL PUMP ASSEMBLY

from

$744.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$73.99

This fuel pump driver module is a direct replacement for the original equipment module. Designed to match the original fit and function, it features a plug & play connection for an easy installation.

Product Features:

Direct replacement – this fuel pump driver module matches the fit and function of the original equipment module to restore vehicle operation
Plug and play installation – this fuel pump driver requires no modifications or special tools to install
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Quality tested – vehicle simulation tested to ensure performance

from

$39.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Top Picks for 2019 Ford F-250 Super Duty Air Flow Sensors

Upgrade Ford F-250 Super Duties with top-quality Air Flow Sensors parts, including 15 OEM and aftermarket selections for your 2019 model.

show more show less

from

$111.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Inputs from the camshaft, throttle position and crankshaft sensors provide the Power-train Control Module (PCM) the information needed to make the vehicle perform efficiently.
The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
Designed for long service life under harsh under-hood conditions.
Designed with OE electrical connectors ensuring proper fits.
Application-specific, one-size-fits-all design.

from

$89.65

Units come ready to “plug and play,” with no need for modifications
Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
Tight tolerance ranges help minimize repeat repairs and false “Check Engine” warnings
Design includes OE innovations and upgrades

from

$59.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Inputs from the camshaft, throttle position and crankshaft sensors provide the Power-train Control Module (PCM) the information needed to make the vehicle perform efficiently.
The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
Designed for long service life under harsh under-hood conditions.
Designed with OE electrical connectors ensuring proper fits.
Application-specific, one-size-fits-all design.

from

$53.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

Bosch OE quality pressure sensors for accurate measurements
Bosch OE quality pressure sensors for long term stability
Bosch OE quality pressure sensors with a short response time
Bosch OE quality pressure sensors with improved media resistance

from

$49.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$126.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$162.43

Motorcraft MAP sensors are the only MAP sensors recommended by Ford Motor Company for use in Ford and Lincoln vehicles.

Product Features:

New and remanufactured available to help meet your customers’ needs
Units come ready to plug and play, with no need for modifications
Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
Design includes OE innovations and upgrades

from

$149.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$126.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$94.99

OXYGEN SENSOR

from

$91.99

This manifold absolute pressure sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this manifold absolute pressure sensor is designed to match the fit and function of the original sensor on specified vehicles
Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$83.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$48.47

Motorcraft Air Charged Temperature Sensors are designed and tested to meet OE specifications for durability and reliability under extreme conditions. These are manufactured using high standards which ensure long lasting durability. They have high resistance and offer superior service life.

Product Features:

Ensures long lasting durability
Reliable under extreme conditions
Made of high quality material
Resists fatigue failure
Offers superior service life

from

$36.73

AMBIENT TEMP SENSOR

from

$33.76

Ambient Temp Sensor

In-Demand Oxygen Sensors for 2019 Ford F-250 Super Duties

Select from 5 premium Oxygen Sensors parts for your 2019 Ford F-250 Super Duty, with prices ranging from $39.99 to $142.55.

show more show less

from

$89.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Advanced Wideband sensing element for exact air/fuel measurement
Robust sensor design increases sensor longevity
Seared protection tube due to 100% functional quality test
True Direct-fit
Pre-coated threads with anti-seize compound right out of the box

from

$39.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$142.55

Oxygen Sensor

from

$61.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$59.02

Oxygen Sensor

Most Sold 2019 Ford F-250 Super Duty Fuel Injectors

Explore our best-selling Ford parts for the 2019 F-250 Super Duty among 23 OEM and aftermarket options starting from $5.49.

show more show less

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$114.99

Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$91.99

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$8.29

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$189.99

Genuine Ford Original Collisioin Replacement parts, the only parts recommended by Ford Motor Company.

Product Features:

Today’s vehicles use more advanced high-strength steels, exotic metals and composite materials than ever before. Ford Motor Company vehicles also include highly advanced crash-avoidance and safety -system technologies.
It is critical for these systems to be repaired with parts that will deliver the intended level of form, function, performance and safety our engineers originally specified.

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Each gasket set is built to meet or exceed all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$249.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.

Product Features:

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.
End of line testing using the exact OE test specifications.
Guaranteed to provide OE performance and meet all emission specifications.
Continuous improvement, remanufactured with the latest upgrades to components and specifications.

from

$151.99

FUEL INJ KIT

from

$182.99

No matter what the application, there is a unique Motorcraft and Ford Part designed, manufactured and comprehensively tested to perform to Ford specifications and quality standards.

Product Features:

Why Buy:
Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these aftermarket replacement parts, ensuring the most current technology and performance.
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

from

$132.99

FUEL INJ KIT

from

$32.99

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles.
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$697.99

Product Features:

Each unit is 100% tested to OE specifications
Includes fuel injector high pressure fuel line
Includes injector hold-down bolt
Includes copper combustion seal
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$687.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications.
Includes all new premium quality o-rings and seals.
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation.

from

$519.99

KIT-FUEL INJ.

from

$374.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks. End of line testing using the exact OE test specifications. Guaranteed to provide OE performance and meet all emission specifications. Continuous improvement, manufactured with the latest upgrades to components and specifications. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, and Asian vehicles.

Product Features:

100% of injectors are end of line tested using the exact OE test specifications and equipment
Manufactured with the latest OE updates, so they can often be superior to the parts they replace
Manufactured using all OE tools and processes
Guaranteed to provide OE performance

from

$308.99

100% of injectors are end of line tested using the exact OE test specifications and equipment
Manufactured with the latest OE updates, so they can often be superior to the parts they replace
Manufactured using all OE tools and processes
Guaranteed to provide OE performance

from

$191.80

Units come ready to “plug and play,” with no need for modifications
Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
Tight tolerance ranges help minimize repeat repairs and false “Check Engine” warnings
Design includes OE innovations and upgrades

from

$172.36

Hitachi manufactures a direct fit air mass sensor that guarantees OEM quality, fit and performance.

Product Features:

OEM Quality Direct fit Application
Platinum coated sensing element
Meets or exceeds OEM specifications
Utilizes the factory style mounts, connectors and fittings
Provides exceptional reliability

from

$70.99

CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$52.68

Fuel Injector O-Ring

from

$23.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$19.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$17.29

REMAN FUEL INJECTOR

Top-Rated Fuel and Emissions Systems Brands For Your 2019 Ford F-250 Super Duty

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2019 Ford F-250 Super Duties. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO, Hitachi, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2019 F-250 Super Duty start at just $5.49 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2019 Ford F-250 Super Duty Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2019 Ford F-250 Super Duty, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 2019 Ford F-250 Super Duty. With over 9 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.49, with an average price of just $23.00. Plus, with over 109 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$8.99

This product is not rated

EGR/EXHAUST AIR SUPPLY GASKET

“”

from
$104.99

This product is not rated

EGR/EXHAUST AIR SUPPLY GASKET

“”

from
$5.49

This product is not rated

Fuel Injection Throttle Body Mounting Gasket

“”

Popular Hitachi 2019 Ford F-250 Super Duty Fuel and Emissions Systems

Hitachi auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2019 Ford F-250 Super Duty owner should feel confident when installing genuine Hitachi parts in their vehicle. To ensure the best fit and performance for your 2019 F-250 Super Duty, Advance Auto Parts carries a full inventory of 3 Hitachi Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these Hitachi Fuel and Emissions Systems range from $91.99 to $172.36, plus, with more than 2 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$172.36

This product is not rated

Mass Air Sensor

“”

from
$114.99

(2)

Air Flow Sensor – New Actual OE Part

“Perfect fit and reasonable price”

from
$91.99

This product is not rated

Air Flow Sensor – New Actual OE Part

“”

FAQs for 2019 Ford F-250 Super Duty Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2019 Ford F-250 Super Duties?

Out of 86 Fuel and Emissions Systems that fit 2019 Ford F-250 Super Duties, the following parts are the top sellers:

Air Flow Sensor – New Actual OE Part (10595018) – $91.99
Fuel Tank Cleaning Kit (11692237) – $12.49
Locking Fuel Cap: 10510, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (10049410) – $32.99

What’s the price range for 2019 Ford F-250 Super Duty Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2019 Ford F-250 Super Duty start at $5.49 and go up to $1,361.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2019 Ford F-250 Super Duty?

The average price for Fuel and Emissions Systems for the 2019 Ford F-250 Super Duty is $130.68. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford F-250 Super Duty model years?

Yes, we currently carry Fuel and Emissions Systems for 25 model years of Ford F-250 Super Duties between 1999 and 2024. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Fuel and Emissions Systems for my 2019 Ford F-250 Super Duty?

The cheapest 2019 Ford F-250 Super Duty Fuel and Emissions Systems we carry in stock are:

Fuel Injection Throttle Body Mounting Gasket (10901033) – $5.49
Fuel Injector O-Ring Kit (3504360) – $7.49
EGR/EXHAUST AIR SUPPLY GASKET (11646359) – $7.99
Fuel Injector Seal Kit (11692632) – $8.29
EGR/EXHAUST AIR SUPPLY GASKET (11469069) – $8.99

What types of Fuel and Emissions Systems do you sell for my 2019 Ford F-250 Super Duty?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2019 Ford F-250 Super Duty:

Can I get help with 2019 Ford F-250 Super Duty Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.

What is your return policy for Ford F-250 Super Duty Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Ford F-250 Super Duty Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2019 Ford F-250 Super Duty Fuel and Emissions Systems

Motorcraft – Air Mass Sensor, Remanufactured (Part No.B3150396942MTR)

Carquest Premium – Injection Pressure Regulator (IPR) Valve (Part No.AC20082)

Bosch – Common Rail Pump (Part No.0445010810)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17595)

Bosch – Pressure Sensor (Part No.0261230333)

Motorcraft – PIPE – FUEL (Part No.DFL-1)

Carquest Premium – Fuel Pressure Sensor (Part No.FPA1085)

DENSO – Oxygen Sensor (Part No.C5010690358ND)

Motorcraft – Ambient Temp Sensor (Part No.P4025679176MTR)

Dorman – Fuel Tank Lock Ring (Part No.579-128)

Bosch – Oxygen Sensor (Part No.C5010647220BOS)

Carquest Premium – Fuel Injection Pressure Sensor (Part No.FPC1011)

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECC1013)

Carquest Premium – Fuel Pump Module Assembly M2520801: Fuel Pump, Sending Unit, Wiring Harness and Strainer (Part No.M2520801)

Dorman – EGR Cooler/Intake Gasket Kit (Part No.904-265)

Carquest Premium – Exhaust Gas Recirculation (EGR) Pressure Sensor (Part No.EGC1011)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.ES 73073)

aFe POWER – aFe POWER EGR Cooler (Part No.46-90073)

Carquest Premium – Vapor Canister (Part No.CPN2306)

Motorcraft – Original Equipment (O.E.) Valve Assembly (Part No.CX-2369)

Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPC1054)

Carquest Premium – Exhaust Gas Recirculation (EGR) Tube (Part No.EGE1655)

Bosch – Pressure regulator (Part No.0281006017)

Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.72777)

Dorman – Fuel Ignition Harness (Part No.645-215)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61103)

Carquest Premium – Fuel Cap (Part No.10840Y)

Carquest Premium – Fuel Cap: 10840, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10840)

Carquest Premium – Locking Fuel Cap: 10510, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10510)

Carquest Premium – Locking Fuel Cap (Part No.10510Y)

Motorad – Tethered Fuel Cap (Part No.MGC839T)

Carquest Premium – Locking Fuel Cap (Part No.10510D)

Carquest Premium – Diesel Fuel Cap: 10840D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10840D)

Gates – Fuel Tank Cap (Part No.E2010668563GAT)

Motorcraft – Motorcraft Fuel Tank Cap (Part No.E2010672210MTR)

Motorad – Tethered Fuel Cap (Part No.MGC639T)

Motorad – Tethered Fuel Cap (Part No.MGC539T)

Carquest Premium – Reman Diesel High Pressure Fuel Pump (Part No.AM92123)

Worldpac – FUEL PUMP ASSEMBLY (Part No.E30013567442MTR)

Worldpac – FUEL PUMP ASSEMBLY (Part No.E30014076551MTR)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG2260)

Dorman – Fuel Pump Relay Module (Part No.601-240)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.CX-2432)

Motorcraft – Air Mass Sensor, New (Part No.B3150445314MTR)

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.CX-2420)

Bosch – Pressure Sensor (Part No.0261230333)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1148)

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 12.8" Long, Heated, Direct Fit (Part No.24334)

Motorcraft – Motorcraft MAP Sensor (Part No.C7044559823MTR)

DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 11.54" Long, Heated, Exact Fit (Part No.234-5097)

DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 14.65" Long, Heated, Exact Fit (Part No.234-5173)

Worldpac – OXYGEN SENSOR (Part No.C50101333711BOS)

Dorman – Manifold Absolute Pressure Sensor (Part No.904-930)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA1505)

Motorcraft – Air Charged Temperature Sensor (Part No.C6000671980MTR)

Worldpac – AMBIENT TEMP SENSOR (Part No.P40254195562ANA)

Motorcraft – Ambient Temp Sensor (Part No.P4025679176MTR)

Bosch – Wideband Oxygen Sensor: 5 Wire, 14.57" Long, Heated, Exact Fit (Part No.17487)

NTK – Switching Oxygen Sensor: 4 Wire, 17.75" Long, Heated, Direct Fit (Part No.22052)

Motorcraft – Oxygen Sensor (Part No.C5010671953MTR)

DENSO – Oxygen Sensor: Downstream, 4 Wire, 15.43" Long, Heated, Exact Fit (Part No.234-4576)

Motorcraft – Oxygen Sensor (Part No.C50101349374MTR)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0112)

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0012)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.AFLS-165)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61698)

Bosch – Pressure regulator (Part No.0281006017)

Motorcraft – FUEL INJ KIT (Part No.CM-5324)

Motorcraft – Fuel Injection Pressure Regulator (Part No.CM-5185)

Motorcraft – FUEL INJ KIT (Part No.CM-5325)

Dorman – Fuel Injector O-Ring Kit (Part No.904-275)

Carquest Premium – Remanufactured Fuel Injector (Part No.AD25122)

Carquest Premium – Remanufactured Fuel Injector (Part No.AD25112)

Motorcraft – KIT-FUEL INJ. (Part No.CN-6050-RM)