Name: Manifold Absolute Pressure Sensor (MAP)
Brand: Carquest Premium
SKU: ECC1148
Price: 49.99 USD

from

$49.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$30.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$243.99

Fuel Pump Driver Module

from

$96.99

This complete gasket and hardware kit includes all the necessary components for the installation of the Exhaust Gas Recirculation (EGR) Cooler.

Product Features:

Includes intake manifold gaskets and installation hardware
Includes OE coolant hose
Direct fit OE replacement

from

$21.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$69.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$249.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.

Product Features:

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.
End of line testing using the exact OE test specifications.
Guaranteed to provide OE performance and meet all emission specifications.
Continuous improvement, remanufactured with the latest upgrades to components and specifications.

from

$12.88

Engineered from rubber for superior resistance to fuel, oil and heat, Dorman’s Fuel Injector O-rings maintain an air-tight seal. This complete kit, containing multiple rings in various sizes, makes installation fast and convenient. O-rings are recommended for replacement any time you service the fuel injectors.

Product Features:

Naturally combats brittleness, cracking, and heat aging
O-rings also sold separately
Easy installation
Quality tested to ensure durability

from

$63.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$371.99

No Core Charge! No Core Exchange!: aFe Power is proud to introduce the square body direct replacement EGR Cooler for 2004-2007 V8-6.0L (td) Ford Power Stroke trucks. This EGR Cooler is a 100% new unit, not remanufactured. The cooler utilizes a thicker wall to extend life and resist failure. The unit is TIG welded and pressure tested at the factory. aFe simplifies the buying experience by not requiring a core charge nor a core exchange fee. New Construction: aFe EGR coolers are constructed from new stainless steel components. All connections are welded not brazed, for reliability. Direct-Flow Design: Thicker wall tubes resist clogging, resulting in extended life of the cooler. The heat exchanger tube wall thickness is more than twice as thick as the OE unit. Gasket Kit: The complete gasket kit includes all required components for the removal and replacement of the EGR cooler, Sold Separately. Also Fits: Ford Excursion 04-05 V8-6.0L (td). Emissions Disclaimer: This product does not require a CARB EO#.

Product Features:

Improved Direct-Flow Design Prevents Failures
All New Construction; Not A Repaired/Refurbished Unit
All Connections Are Welded Not Brazed
Pressure Tested

from

$81.99

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Complete kit comes with everything needed to rebuild the fuel filter housing after a weakened stock spring causes hard starting, stalling, poor fuel mileage, and poor acceleration
Includes fuel pressure regulator, gasket, O-rings, and hardware for ease of installation
Once installed, the new fuel pressure regulator will Increase fuel pressure by 10-15 PSI, maximizing performance and injector life
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$28.49

CARQUEST premium fuel lines meet or exceed critical OE performance specifications for sealing and burst pressure. The fuel line on the Ford 6.4L Power Stroke must be replaced any time the line is removed, or when the injector is serviced. This complete kit includes the line and components necessary to reseal the injector.

Product Features:

Premium OE quality materials
Precision machined fittings with corrosion resistant plating
Includes injector O-ring
Includes stainless-steel combustion seal for injector

from

$30.65

Fuel Sender Lock Rin

from

$2.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$82.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$8.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$32.02

Ambient Temp Sensor

from

$131.99

Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.

Product Features:

BSE mass air flow sensors are 100% tested to perform like new. OEM designs are analyzed, and design upgrades are implemented when necessary to provide improved durability over the OEM design.
Sensors are validated for extended run, extreme hot and cold, over-voltage, over-current, and shock and vibration.
Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions.
All parts are THE ORIGINAL parts your car was built with. All parts are validated for on car fit, form, and function.

from

$133.99

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$315.23

Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:

Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
Single stage turbine pump provides quiet, energy efficient operation
Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
High capacity filter media helps supply clean fuel to the injection system
Available serviceable in-tank fuel filter for markets with poor quality fuels

from

$129.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$86.60

The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft oxygen sensors are designed for maximum performance.

Product Features:

Same components used in the factory
Units come ready to plug and play, with no need for modifications
OE connectors and wire lengths
Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
Designed to help provide optimal performance and fuel economy
OE enhancements are included in the most current designs
Vehicle-specific coverage Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.

from

$140.81

Motorcraft MAP sensors are the only MAP sensors recommended by Ford Motor Company for use in Ford and Lincoln vehicles.

Product Features:

New and remanufactured available to help meet your customers’ needs
Units come ready to plug and play, with no need for modifications
Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
Design includes OE innovations and upgrades

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$297.99

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:

Reduces Throttle Response Time
Improves Acceleration
Easy To Install
Does Not Affect The Vehicles Electronic System

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$101.99

The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft Emissions components are designed and tested to Ford’s rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.

from

$77.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features: