2018 Ford F-250 Super Duty Differentials

Essential 2018 Ford F-250 Super Duty Differentials

Yukon Gear – Master Overhaul Kit For ’08-’10 Ford 10.5" Differentials Using OEM Ring & Pinion (Part No.14152)

Master Overhaul Kit For '08-'10 Ford 10.5" Differentials Using OEM Ring & Pinion

from

$724.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits 2008-2010 Ford 10.5″ housing with OEM ring and pinion set
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
  • For use to install 10.5″ gears into 10.5″ housing
See More

FAG US – SHAFT SEAL (Part No.SS2633)

SHAFT SEAL

from

$26.49
SHAFT SEAL

Yukon Gear – Chrome Cover For 10.25" Ford (Part No.32007)

Chrome Cover For 10.25" Ford

from

$57.99
Chrome cover for 10.25″ Ford.

Product Features:
  • Fits Ford 10.25″
  • Chrome
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1102)

Differential Pinion Shim Kit

from

$9.49


Product Features:
  • KIT SHIM PINION
See More

FAG US – CONE (Part No.KNP343847)

CONE

from

$60.99
CONE

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-88510)

Tapered Roller Bearing

from

$10.29
Product Features:
  • Brand may vary by location
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-803146)

Tapered Roller Bearing

from

$27.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 60, 4.56 & Up (Part No.20031)

Replacement Standard Open Carrier Case For Dana 60, 4.56 & Up

from

$274.99
Yukon replacement standard open carrier case for Dana 60, 4.56 & up (Not ABS) 2-7/16″ tall.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 60
  • 4.56 and up ratio only
  • Does not include spider gears
  • Not compatible with ABS applications
See More

Yukon Gear – Differential (Part No.26039)

Differential

from

$869.99
Differential

Pro-King – Differential Cover Gasket (Part No.764A303)

Differential Cover Gasket

from

$3.29
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – 10.25" & 10.5" Ford Carrier Installation Kit (Part No.57006)

10.25" & 10.5" Ford Carrier Installation Kit

from

$289.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 10.25″ & 10.5″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Ford 10.25″ and 10.5″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Motive Gear – Differential Carrier Bearing Kit – Koyo (Part No.R10.5CK)

Differential Carrier Bearing Kit - Koyo

from

$112.99
Product Features:
  • CARRIER BEARING KIT FORD 10.5″
See More

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

Differential Pinion Solid Spacer Kit w/Shims

from

$10.49


Product Features:
  • SOLID SPACER FORD 8.8″ & 9″
See More

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Timken – Axle Shaft Seal (Part No.K4021473864TIM)

Axle Shaft Seal

from

$45.90
Timken understands how important seals are in the automotive industry. Leveraging our knowledge and experience with bearings, we offer a broad line of light-duty oil seals made exclusively for Timken in some of the world’s most advanced manufacturing plants.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

USA Standard Gear – Master Overhaul Kit for the Ford 10.25 Differential (Part No.37026)

Master Overhaul Kit for the Ford 10.25 Differential

from

$488.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Ford 10.25″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Minor Install Kit For Dana 50 Straight Axle Differential (Part No.12025)

Minor Install Kit For Dana 50 Straight Axle Differential

from

$135.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits straight axle Dana Spicer 50
  • Included are a pinion seal, complete shim kit, marking compound and brush.
See More

Yukon Gear – Bearing Race Driver (Part No.56014)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM88510 race
  • All steel construction
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Dorman – Rear Axle Shafts (Part No.630-615)

Rear Axle Shafts

from

$261.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Yukon Gear – Axle Shaft (Part No.21754)

Axle Shaft

from

$559.99
Axle Shaft

USA Standard Gear – Ring & Pinion Gear Set For Ford 10.25" In A 5.13 Ratio (Part No.36111)

Ring & Pinion Gear Set For Ford 10.25" In A 5.13 Ratio

from

$374.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits 1993 – 1999 Ford 10.25″
  • 10.25″ ring gear diameter
  • 31 spline pinion
  • 12 ring gear bolts
  • 5.13 ratio
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For ’10 & Down Ford 10.5" In A 3.73 Ratio (Part No.24332)

High Performance Ring & Pinion Gear Set For '10 & Down Ford 10.5" In A 3.73 Ratio

from

$549.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits 1999-2010 Ford 10.5″
  • 10.50″ ring gear diameter
  • 31 spline pinion
  • 12 ring gear bolts
  • 3.73 ratio
See More

Yukon Gear – Dura Grip For Ford 10.25" & 10.5" (Part No.26031)

Dura Grip For Ford 10.25" & 10.5"

from

$1195.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit fits full floating applications only.

Product Features:
  • Fits Ford 10.25″ and 10.5″
  • Clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Dura Grip For Dana 50 (Part No.26028)

Dura Grip For Dana 50

from

$739.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits Dana Spicer 50
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

2018 Ford F-250 Super Duty Differentials

Maybe you’re in the middle of a full rebuild of that 2018 Ford F-250 Super Duty. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 80 different Differentials in our inventory ranging from $9.49 to $2,864.99. That means you can find the exact parts or products you need to keep that 2018 Ford F-250 Super Duty running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 2018 Ford F-250 Super Duty. Valvoline, Royal Purple, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2018 Ford F-250 Super Duty, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,905 reviews in this category, some of the top rated parts include Taper Bearing Set with 2.5 stars and Bearings with 4.3 stars.

So if you’re in the market for aftermarket Differentials to keep your 2018 Ford F-250 Super Duty rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2018 Ford F-250 Super Duty Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2018 Ford F-250 Super Duty demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your F-250 Super Duty the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Rear Differential Cover Gaskets categories, plus more. For a 2018 Ford F-250 Super Duty, our most popular Felpro Differentials include:
Differential Cover Gasket
from $9.49
(26)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 2018 Ford F-250 Super Duty Differentials

What are the most purchased Differentials for the 2018 Ford F-250 Super Duty?

Out of 80 Differentials for the 2018 Ford F-250 Super Duty, the most popular in our inventory are:
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
from $19.99
This product is not rated
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
Differential Oil

What are the top-rated 2018 Ford F-250 Super Duty Differentials?

Top-rated Differentials for your 2018 Ford F-250 Super Duty based on customer reviews/ratings are:
Taper Bearing Set
from $13.79
(4)
Taper Bearing Set
“Worked great on my 1981 Chevy C20”
Bearings
from $22.99
(3)
Bearings
“works great !!!”
Bearings
from $38.49
(2)
Bearings
“nice finish and function. Should perform well.”