2018 Cadillac CT6 Wheels and Tires
More 2018 Cadillac CT6 Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 2018 Cadillac CT6, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 2018 Cadillac CT6 Wheels and Tires
Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 315MHz (Part No.UVS3041)
from
$47.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- 315 MHz TPMS Universal with rubber valve
- Programmable – Only take 3 seconds to configure to specific application
- Always up-to-date with the new programming function via the TPMS diagnostic tool
- Covers multiple applications with one OE equivalent sensor
- Reprogrammable and Copy Clone Capable
- Have WAL technology for locating tire positon
- Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – MX-Sensor 1-Sensor Bulk Box 240 (Part No.300050)
from
$7321.99
The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
- Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
- Combined Frequency 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Maximum Signal Strength / Battery Reliability
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
REDI-Sensor – TPMS Service Kit (Part No.SE54191)
from
$8.49
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovatio
Product Features:
See More
Product Features:
- OE – validated part identical to the dealer
- Electroless nickel-plated valve cores
- Advanced anodization of valve stems and hex nuts
- Includes torque specifications and installation instructions
- TPMS service kits are required whenever performing tire replacement or service
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
ACDelco – Tire Pressure Sensor Kit with Bolt, Valve Cap, and Valve Stem (Part No.13598909)
from
$19.99
ACDelco GM Original Equipment Tire Valve Stems are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
Product Features:
See More
Product Features:
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
McGard – Chrome Cone Seat Style Lug Nut Set (M14 X 1.5 Thread Size) – Box of 100 Lug Nuts (Part No.69469)
from
$429.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Bulk box of 100.
McGard – Black Cone Seat Bulge Style Lug Nuts (M14 x 1.5 Thread Size) – Box of 144 Lug Nuts (Part No.69474)
from
$1519.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Bulk box of 144.
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly (Part No.513401)
from
$254.99
Product Features:
See More
- Innovative roll form design ensures consistent and optimal preload.
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
McGard – Chrome Cone Seat SplineDrive Lug Nut Set (M14 x 1.5 Thread Size) – Set of 4 (Part No.65315)
from
$39.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Requires 65301 or 65302 Installation Tool sold separately.
McGard – Black Bulge Cone Seat Style Lug Nut Set (M14 X 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64074)
from
$34.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Huf North America – 315/433MHz Universal Sensor (Part No.UVS7050)
from
$42.99
Professional installation is strongly suggested
Product Features:
See More
Product Features:
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 433MHz (Part No.UVS4040)
from
$47.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- 433 MHz TPMS Universal with metal valve
- Programmable – Only take 3 seconds to configure to specific application
- Always up-to-date with the new programming function via the TPMS diagnostic tool
- Covers multiple applications with one OE equivalent sensor
- Reprogrammable and Copy Clone Capable
- Have WAL technology for locating tire positon
- Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Carquest Premium – Hub Assembly with Wheel Bearing 91-605226 (Part No.91-605226)
from
$148.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
Carquest Premium – Hub Assembly with Wheel Bearing 91-605237 (Part No.91-605237)
from
$166.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
McGard – Black Tuner Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4; Set of 4 Locks and 1 Key (Part No.25116)
from
$124.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- For use on “Tuner” wheels or wheels with very small lug nut holes.
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For aluminum wheels only.
Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 2.05" L, Chrome, 4 Locks/1 Key (Part No.711-624)
from
$19.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
McGard – Chrome Tuner Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4; Set of 4 Locks and 1 Key (Part No.25115)
from
$104.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- For use on “Tuner” wheels or wheels with very small lug nut holes.
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
Dill Air Control – Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece (Part No.VS-20)
from
$3.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits and tools.
Product Features:
See More
Product Features:
- TPMS Snap-in stem for GM, Ford
- Includes stepped screw.
- 0.453″ rim hole compatibility
- 80 PSI maximum cold inflation pressure
REDI-Sensor – TPMS Service Kit, REDI-Sensor and OE Style (Part No.SE54190)
from
$4.49
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.
Product Features:
See More
Product Features:
- OE – validated part identical to the dealer
- Electroless nickel-plated valve cores
- Advanced anodization of valve stems and hex nuts
- Includes torque specifications and installation instructions
- TPMS service kits are required whenever performing tire replacement or service
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
REDI-Sensor – Rubber snap in stem with metal press clip teeth (Part No.SE54196)
from
$5.99
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.
Product Features:
See More
Product Features:
- OE – validated part identical to the dealer
- Rubber snap-in stem
- Press clip design
- No tools for press clip installation
- TPMS service kits are required whenever performing tire replacement or service
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
McGard – Chrome SplineDrive 5 Lug Wheel Installation Kit (M14 x 1.5 Thread Size) (Part No.65515)
from
$219.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)
from
$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
- DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dorman – M14-1.50 Serrated Wheel Stud – 16.01mm Knurl, 57.93mm Length (Part No.610-434)
from
$2.29
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – Wheel Stud (Part No.O8060833065DOR)
from
$3.83
Wheel Stud
Popular 2018 Cadillac CT6 Wheels and Tires Categories
2018 Cadillac CT6 Wheels and Tires
You count on your 2018 Cadillac CT6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 72 Wheels and Tires ranging in price from $2.29 to $7,321.99, you’re sure to find everything you need for your 2018 Cadillac CT6.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 10 different brands like Autel, Dorman, and Schrader. 2018 Cadillac CT6 Wheels and Tires start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 1,017 extensive product reviews on 2018 Cadillac CT6 Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 1.42" L, Chrome, 4 Locks/1 Key with 2.8 stars and Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Open End, 0.832" Length, Chrome, 4 Pack with 5.0 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2018 Cadillac CT6 below to get started!
Top-Rated Wheels and Tires Brands For Your 2018 Cadillac CT6
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2018 Cadillac CT6 running right for years to come. In our inventory you’ll find brands like Autel, Dorman, Schrader, and even more.
Popular Dill Air Control Wheels and Tires
You’ll find popular Dill Air Control brand products across TPMS Sensor Kits. All are waiting to get your 2018 Cadillac CT6 back on the road. Some of the top-rated Dill Air Control products in these categories are:
from
$3.49
(1)
Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece
Tire Pressure Sensor Service Kits
Top-Rated Schrader Wheels and Tires
If Schrader are what you’re looking for, our inventory holds plenty. We stock Schrader brand Wheels and Tires for your 2018 Cadillac CT6, and some of our most reviewed Schrader parts include:
from
$41.99
(69)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Tire Pressure Sensors
FAQs for 2018 Cadillac CT6 Wheels and Tires
What are the most purchased Wheels and Tires for the 2018 Cadillac CT6?
Out of 72 Wheels and Tires for the 2018 Cadillac CT6, the most popular in our inventory are:
from
$3.49
This product is not rated
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Duplex Acorn, 1.87" Length, Chrome (Sold by each)
Wheel Lug Nuts
from
$2.29
This product is not rated
M14-1.50 Serrated Wheel Stud – 16.01mm Knurl, 57.93mm Length
Wheel Studs
What are the top-rated 2018 Cadillac CT6 Wheels and Tires?
Top-rated Wheels and Tires for your 2018 Cadillac CT6 based on customer reviews/ratings are:
from
$16.29
(26)
Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 1.42" L, Chrome, 4 Locks/1 Key
“Exact fit great product”
from
$8.29
(4)
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Open End, 0.832" Length, Chrome, 4 Pack
“Worked great for what I needed these for”
from
$34.99
(3)
Chrome Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key
“Perfect fit; easy install; good price: fast shipping”
