2018 BMW 320i Filters and PCVs
More 2018 BMW 320i Filters and PCVs Categories
If you’re looking for an original Filters and PCVs replacement for a 2018 BMW 320i, you can search through our selection below. You’ll also find aftermarket and OEM Filters and PCVs to meet your needs.
Essential 2018 BMW 320i Filters and PCVs
Carquest Standard – Engine Air Filter: Meets Original Equipment Specifications (Part No.R93005)
from
$19.79
Carquest Standard engine air filters are designed to remove airborne contaminants and optimize engine performance in all driving conditions. Each air filter features cured filter media that increases tensile strength, allowing the filter to maintain high-pressure requirements without collapse. Carquest Standard air filters use a polyurethane construction that provides higher tear strength and more structural support. Our Carquest Standard air filters meet original equipment (O.E.) standards and fulfill the requirements for maintaining a new vehicle warranty.
See More
Carquest Premium – Air Filter (Part No.88135)
from
$21.49
Blocks dust, dirt, bacteria and pollution that can interrupt engine performance. Designed to offer consistent air flow to help increase horsepower and acceleration
Product Features:
See More
Product Features:
- Prescription filtration provides stronger resistance against moisture and collapse from rain and snow
- Optimum pleat count provides a higher filtration function
- Superior protection for vehicles in dusty or dirty environments, snow, high heat/humidity and frequent trips less than 10 miles
Dorman – Transmission Pan Filter And Gasket (Part No.265-853F)
from
$86.99
This Dorman OE FIX transmission filter is designed for use with Dorman’s 265-853 transmission pan. By replacing only the filter during servicing, you can significantly reduce maintenance costs compared with using original equipment.
Product Features:
See More
Product Features:
- Transmission Pan Filter And Gasket
- Transmission Pan Filter And Gasket
- This Dorman OE FIX transmission filter is designed for use with Dorman’s 265-853 transmission pan. By replacing only the filter during servicing, you can significantly reduce maintenance costs compared with using original equipment.
- Cost-effective replacement – this transmission pan filter allows for direct servicing of a clogged filter instead of replacing the entire pan
- Application specific – designed for fit and performance with certain pans for certain vehicles
ATP – AT FLTR 5/16 D BARB (Part No.JX-151)
from
$42.99
AT FLTR 5/16 D BARB
MAHLE Original – Oil Filter Adapter Gasket (Part No.B32345)
from
$21.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Victor Reinz – Engine Oil Filter Adapter Gasket (Part No.71-37157-00)
from
$56.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Febi – Oil Drain Plug (Part No.A611014718FEB)
from
$2.89
Oil Drain Plug
Dorman – Oil Drain Plug Standard M12-1.50, Head Size 17Mm (Part No.090-088CD)
from
$4.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
APA/URO Parts – Oil Filter Housing C (Part No.A63012102297APA)
from
$57.36
URO Parts oil filter housing caps feature durable construction that ensures a long service life. A special finish resists rust and provides excellent protection against underhood heat.
Product Features:
See More
Product Features:
- Engineered to conform to strict emission control standards
- Special finish resists rust and provides excellent protection against underhood heat
APA/URO Parts – Oil Filter Housing (Part No.A63001317616APA)
from
$421.85
Oil Filter Housing
Dorman – Oil Filter Cap – Plastic (Part No.917-056)
from
$42.99
Cracked or stripped filter cover making oil changes difficult? This direct replacement oil filter cap matches the fit and function of the original equipment cap for a reliable repair.
Product Features:
See More
Product Features:
- Ideal replacement – this engine oil filter cover is a direct replacement for the original equipment filter cover
- Durable construction – this part is specifically designed to withstand extreme underhood temperatures to resist cracking and leaking
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
- Easy to install – no special tools required
Carquest Premium – Cabin Air Filter: Cleans Air by Reducing Pollen and Dust (Part No.90289C)
from
$37.99
Carquest Premium cabin air filters are manufactured to the highest quality standards and field tested to ensure easy installation. Our cabin air filters are engineered to stop airborne contaminants from getting into the cabin while also protecting the delicate components of modern vehicle climate control systems. Carquest Premium cabin air filters utilize electrostatic particulate, non-woven media for longer filter life. Each Carquest Premium cabin air filter also includes application-specific installation instructions in the box to save you installation time.
See More
Carquest Premium – CABIN AIR FILTER (Part No.480921)
from
$9.99
Removes unwanted particles and harmful gases from the air to help ensure a cleaner atmosphere inside the vehicle.
Product Features:
See More
Product Features:
- Products with a price competitive advantage
- Using imported material
- Product quality is guaranteed
- Reduces Pollen and dust inside a vehicle
- Recommend replacement every 12,000 miles
- Cleans and freshens air entering a vehicle’s ventilation system
FRAM Force – Cartridge Oil Filter: Ideal For Any Type of Oil Protection to 15,000 miles (Part No.FF10075)
from
$17.49
FRAM FORCE oil filter is engineered to provide advanced protection for all drivers that experience extreme driving conditions. Coated with a rough non-slip textured surface, Total Grip allows for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter. Its synthetic blend media provides 99% filtering efficiency and protects up to 15,000 miles (24,000 kilometers).
Product Features:
See More
Product Features:
- Proven protection for up to 15,000 miles
- Designed for use with synthetic or conventional motor oils
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in to current engines
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-7014)
from
$17.99
K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards.
Product Features:
See More
Product Features:
- High performance design for outstanding filtration
- High-efficiency media with uniform pleats
- Allows for high oil flow rates
- Ideal for high-end synthetic motor oil
PurolatorBOSS – Oil Filter: Ideal for Full Synthetic Oil, Protects up to 20,000 miles (Part No.PBL15607)
from
$19.49
PurolatorBOSS Premium Oil Filters are the next generation in oil filtration, delivering maximum engine protection for up to 20,000 miles. PurolatorBOSS exclusively features SmartFUSION Technology – a full synthetic filter media with reinforced polymer mesh backing for over 99% Dirt Removal Power. Engineered to work well with all oil types and viscosities, especially full synthetic oil, PurolatorBOSS is ideal for the most demanding driving conditions, including frequent towing and hauling, stop and go traffic, long commutes, long idle periods and extreme climates. Its rugged internal construction withstands wear and high mileage with a heavy duty BOSS Steel Casing and an innovative double helix, high-flow center tube for twice the strength of traditional side-seam designed center tubes. Widely available for most vehicles on the road today, PurolatorBOSS combines the latest filter technologies for long-lasting protection and advanced engine performance.
Product Features:
See More
Product Features:
- Up to 20,000 miles – maximum engine protection
- Ideal for full synthetic oils
- Over 99% Dirt Removal Power
- SmartFUSION Technology – a full synthetic filter media with reinforced polymer mesh backing for expanded dirt holding capacity
- Silicone anti-drainback valve prevents dry starts
- BOSS Steel Casing withstands extreme pressure while metal end-caps enhance durability
- PuroSEAL Gasket made from ethylene-acrylic for maximum leak protection
Carquest Premium – Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.85374)
from
$12.29
Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.
Product Features:
See More
Product Features:
- Protection for up to 10,000 miles
- Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
- Solid metal end caps are designed to be long lasting
- Silicone anti-drain back valve for engine start-up protection
- Heavy-duty steel baseplate provides additional strength to resist leakage
- Heavy gauge steel canister withstands high pressure operating conditions
- Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
- Meets requirements for maintaining new vehicle warranties
FRAM Drive – Cartridge Oil Filter: Ideal for Conventional Oil, Protection up to 7,500 miles (Part No.FD10075)
from
$15.99
FRAM Drive is the perfect oil filter for everyday driver. Designed with OE grade synthetic blend media and compatible with both conventional and synthetic oil types, FRAM Drive keeps engine protected for up to 7,500 miles (12,000 kilometers). FRAM Drive is engineered to withstand high temperatures and endure working pressures common in todays engines.
Product Features:
See More
Product Features:
- Proven protection for up to 7,500 miles
- Engineered for use with synthetic or conventional motor oil
- Precision Relief Valve provides consistent oil flow, even in cold conditions
- Designed for everyday drivers who perform oil changes at OE (original equipment) recommended intervals
FRAM Titanium – Cartridge Oil Filter: Ideal For Synthetic Oil Protection to 20,000 mile (Part No.FS10075)
from
$19.49
FRAM Titanium advanced high-flow synthetic oil filters offer ultimate engine protection for up to 20,000 miles (32,000 kilometers). Engineered with premium synthetic blend media, FRAM Titanium provides over 99% dirt trapping efficiency.
Product Features:
See More
Product Features:
- Proven protection for up to 20,000 miles
- Synthetic blend media provides over 99% filtration efficiency.
- Perfect Seal Gasket gives extended durability and temperature protection
- Includes gaskets and O-rings Manufactured to endure the high pressures and high temperatures in today’s engines
aFe POWER – Oil Filter (Part No.44-LF029-MB)
from
$45.99
Pro GUARD HD Oil Filters deliver increased flow and efficiency that are demanded in today’s vehicles. These oil filters utilize a high performance synthetic media for maximum filtration with minimal flow restriction and are engineered to ISO 4548-12. Direct OE replacement cartridge filter for BMW 11427566327 and includes the required O-rings for a hassle-free installation.
Product Features:
See More
Product Features:
- Designed For Extended Interval Oil Changes
- High Flow Rates And Outstanding Filtration
- Engineered to ISO 4548-12 Standards
- Direct Stock Replacement
Carquest Premium – Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.95153)
from
$22.99
Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.
Product Features:
See More
Product Features:
- Protection for up to 10,000 miles
- Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
- Solid metal end caps are designed to be long lasting
- Silicone anti-drain back valve for engine start-up protection
- Heavy-duty steel baseplate provides additional strength to resist leakage
- Heavy gauge steel canister withstands high pressure operating conditions
- Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
- Meets requirements for maintaining new vehicle warranties
- Engineered for use with premium conventional or synthetic oil
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1002)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Carquest Standard – Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles (Part No.R84327)
from
$11.99
Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.
Product Features:
See More
Product Features:
- Protection for up to 5,000 miles
- Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
- Nitrile anti-drain back valve for engine start-up protection
- Lathe cut nitrile sealing gasket prevents leaks
- Double fluted spiral wound center tube allows maximum flow and provides additional strength
- Solid steel baseplate provides additional strength to resist leakage
- Meets requirements for maintaining new vehicle warranties
Purolator ONE – Advanced Protection Oil Filter: Ideal for Hi Mileage & Synth. Oil, Protects to 15,000 miles (Part No.PL15607)
from
$17.99
PurolatorONE Oil Filters keep engines operating at peak performance with up to 99% Dirt Removal Power. Available for most domestic and import applications, PurolatorONE optimizes engine life for up to 15,000 miles of advanced protection for most vehicles on the road today. Made with a high-density synthetic blend filter media and wear-resistant metal end caps, PurolatorONE maintains its integrity and filtering capabilities between oil changes. PurolatorONE is ideal for a wide range of tough driving conditions, including towing, stop and go traffic, commuting and harsh weather conditions. Offers advanced engine protection, especially when used with all synthetic and high mileage oils.
Product Features:
See More
Product Features:
- Up to 15,000 miles – advanced engine protection
- Ideal for all synthetic and high mileage oils
- 99% Dirt Removal Power
- High-density synthetic blend media
- Silicone anti-drainback valve prevents dry starts
- PTFE treated gasket; Heat resistant – stays flexible for advanced leak protection
- Metal end caps provide stability and integrity for greater wear resistance
Mobil 1 – Oil Filter: Ideal for Synthetic Oil, Protection To 20,000 Miles (Part No.M1C-155A)
from
$19.49
Product Features:
See More
- Protects for 20,000 Miles or up to 1 year
- Tested and proven to protect 2X as long as auto manufacturers’ recommended oil change intervals
- Up to 99% efficiency – synthetic blend media keeps oil cleaner and holds more dirt than economy filters
- Strong, durable components for long lasting performance
- Premium O-ring to help prevent leaks
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.PS-7014)
from
$16.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More
Carquest Premium – Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.84327)
from
$16.99
Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.
Product Features:
See More
Product Features:
- Protection for up to 10,000 miles
- Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
- Solid metal end caps are designed to be long lasting
- Silicone anti-drain back valve for engine start-up protection
- Heavy-duty steel baseplate provides additional strength to resist leakage
- Heavy gauge steel canister withstands high pressure operating conditions
- Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
- Meets requirements for maintaining new vehicle warranties
Purolator ONE – Advanced Protection Oil Filter: Ideal for Hi Mileage & Synth. Oil, Protects to 15,000 miles (Part No.PL18181)
from
$21.99
PurolatorONE Oil Filters keep engines operating at peak performance with up to 99% Dirt Removal Power. Available for most domestic and import applications, PurolatorONE optimizes engine life for up to 15,000 miles of advanced protection for most vehicles on the road today. Made with a high-density synthetic blend filter media and wear-resistant metal end caps, PurolatorONE maintains its integrity and filtering capabilities between oil changes. PurolatorONE is ideal for a wide range of tough driving conditions, including towing, stop and go traffic, commuting and harsh weather conditions. Offers advanced engine protection, especially when used with all synthetic and high mileage oils.
Product Features:
See More
Product Features:
- Up to 15,000 miles – advanced engine protection
- Ideal for all synthetic and high mileage oils
- 99% Dirt Removal Power
- High-density synthetic blend media
- Silicone anti-drainback valve prevents dry starts
- PTFE treated gasket; Heat resistant – stays flexible for advanced leak protection
- Metal end caps provide stability and integrity for greater wear resistance
Popular 2018 BMW 320i Filters and PCVs Categories
2018 BMW 320i Filters and PCVs
You count on your 2018 BMW 320i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Filters and PCVs. With 24 Filters and PCVs ranging in price from $4.70 to $421.85, you’re sure to find everything you need for your 2018 BMW 320i.
Brands matter. If you want to shop a specific Filters and PCVs brand, we stock 12 different brands like Carquest Premium, K&N, and Carquest. 2018 BMW 320i Filters and PCVs start as low as $4.70!
One of the best ways to find top quality OEM or aftermarket Filters and PCVs is by asking professionals. Short of that, you can shop with confidence thanks to our 73 extensive product reviews on 2018 BMW 320i Filters and PCVs. Some of the top-rated Filters and PCVs products we carry are CABIN AIR FILTER with 1.0 stars and Oil Filter Cap – Plastic with 5.0 stars.
Did we mention you can order your Filters and PCVs from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Filters and PCVs inventory for your 2018 BMW 320i below to get started!
Top-Rated Filters and PCVs Brands For Your 2018 BMW 320i
Trusted Filters and PCVs OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2018 BMW 320i running right for years to come. In our inventory you’ll find brands like Carquest Premium, K&N, Carquest, and even more.
Popular MAHLE Original Filters and PCVs
You’ll find popular MAHLE Original brand products across Oil Filters. All are waiting to get your 2018 BMW 320i back on the road. Some of the top-rated MAHLE Original products in these categories are:
Top-Rated K&N Filters and PCVs
If K&N are what you’re looking for, our inventory holds plenty. We stock K&N brand Filters and PCVs for your 2018 BMW 320i, and some of our most reviewed K&N parts include:
from
$16.99
(22)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Oil Filters
from
$17.99
(16)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Oil Filters
FAQs for 2018 BMW 320i Filters and PCVs
What are the most purchased Filters and PCVs for the 2018 BMW 320i?
Out of 24 Filters and PCVs for the 2018 BMW 320i, the most popular in our inventory are:
What are the top-rated 2018 BMW 320i Filters and PCVs?
Top-rated Filters and PCVs for your 2018 BMW 320i based on customer reviews/ratings are:
from
$9.99
(2)
CABIN AIR FILTER
“Not flexible, this is a rigid filter. NOT AN EXACT FIT don’t waste your time. AAP needs to take this off asap, to avoid wasting customers times and ca”
from
$42.99
(1)
Oil Filter Cap – Plastic
“Parts were exactly the right size oil filter and oil filter cap were great top of the line it resolved the problem i was experiencing with the vehicle”
