1982 BMW 320i Filters and PCVs
More 1982 BMW 320i Filters and PCVs Categories
If you’re looking for an original Filters and PCVs replacement for a 1982 BMW 320i, you can search through our selection below. You’ll also find aftermarket and OEM Filters and PCVs to meet your needs.
Essential 1982 BMW 320i Filters and PCVs
ATP – AUTO TRANS FLTR KT (Part No.IL-150)
from
$40.99
AUTO TRANS FLTR KT
ATP – AT FLTR 5/16 D BARB (Part No.JX-151)
from
$42.99
AT FLTR 5/16 D BARB
Carquest Premium – Full-Flow Lube Spin-on (Part No.85374HD)
from
$14.49
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
Dorman – Transmission Pan Filter And Gasket (Part No.265-853F)
from
$86.99
This Dorman OE FIX transmission filter is designed for use with Dorman’s 265-853 transmission pan. By replacing only the filter during servicing, you can significantly reduce maintenance costs compared with using original equipment.
Product Features:
See More
Product Features:
- Transmission Pan Filter And Gasket
- Transmission Pan Filter And Gasket
- This Dorman OE FIX transmission filter is designed for use with Dorman’s 265-853 transmission pan. By replacing only the filter during servicing, you can significantly reduce maintenance costs compared with using original equipment.
- Cost-effective replacement – this transmission pan filter allows for direct servicing of a clogged filter instead of replacing the entire pan
- Application specific – designed for fit and performance with certain pans for certain vehicles
aFe POWER – PRO 5R Air Filter: 98.6% Filtration Efficiency, 5 Layer Cotton, Oiled Filter, Track/Street Driving (Part No.30-10048)
from
$93.99
Constructed with 100-percent polyurethane boxed frame, this high flow, oiled OE replacement performance filter will outflow the stock filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.
Product Features:
See More
Product Features:
- High Flow For Increased Performance
- Progressive 5 Layer Cotton Gauze Material
- Deep Cotton Pleats for Increased Flow
- Progressive Bump Seal For Leak-Free Seal
Carquest Premium – Engine Air Filter: Removes up to 99% of Dirt & Debris (Part No.93005)
from
$28.99
Carquest Premium engine air filters are designed to meet OE fit, form and function for optimal filtration and engine protection. High-quality paper, enhanced bonding, and reinforced metal screen backing give Carquest Premium air filters the added strength and durability that modern engines demand. Built to meet or exceed original equipment standards, Carquest Premium air filters provide exceptional engine protection and optimal performance in all driving conditions.
See More
aFe POWER – PRO 5R Air Filter: 98.6% Filtration Efficiency, 5 Layer Cotton, Oiled Filter, Track/Street Driving (Part No.30-10225)
from
$84.99
Constructed with 100-percent polyurethane boxed frame, this high flow, oiled OE replacement performance filter will outflow the stock filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.
Product Features:
See More
Product Features:
- High Flow For Increased Performance
- Progressive 5 Layer Cotton Gauze Material
- Deep Cotton Pleats for Increased Flow
- Progressive Bump Seal For Leak-Free Seal
Carquest Premium – Air Filter (Part No.88135)
from
$21.49
Blocks dust, dirt, bacteria and pollution that can interrupt engine performance. Designed to offer consistent air flow to help increase horsepower and acceleration
Product Features:
See More
Product Features:
- Prescription filtration provides stronger resistance against moisture and collapse from rain and snow
- Optimum pleat count provides a higher filtration function
- Superior protection for vehicles in dusty or dirty environments, snow, high heat/humidity and frequent trips less than 10 miles
Carquest Standard – Engine Air Filter: Meets Original Equipment Specifications (Part No.R93005)
from
$19.79
Carquest Standard engine air filters are designed to remove airborne contaminants and optimize engine performance in all driving conditions. Each air filter features cured filter media that increases tensile strength, allowing the filter to maintain high-pressure requirements without collapse. Carquest Standard air filters use a polyurethane construction that provides higher tear strength and more structural support. Our Carquest Standard air filters meet original equipment (O.E.) standards and fulfill the requirements for maintaining a new vehicle warranty.
See More
Dorman – Oil Drain Plug Standard M22-1.50, Head Size 19mm (Part No.65223)
from
$8.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Standard Engine Oil Drain Plug: M22-1.50 Thread, 19 mm Head (Sold by each) (Part No.090-055)
from
$10.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Standard Engine Oil Drain Plug: M24X1.5 Thread, 10 mm Head, 1 Pack (Part No.090-214CD)
from
$9.49
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Standard Engine Oil Drain Plug: M12-1.50 Thread, 15 mm Head, 1 Pack (Part No.69014)
from
$3.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Febi – Oil Drain Plug (Part No.A611014718FEB)
from
$2.89
Oil Drain Plug
Accufit – Oil Drain Plug, M12 x 1.5 (Part No.ODP-00010B)
from
$5.29
AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.
Product Features:
See More
Product Features:
- Easy Install – Finger-grip wing for ease of installation
- All plugs have 14mm hex – just one wrench works for all
- Hi-Temp Gasket – Red hi-temp gasket for max sealing protection
ATP – AT IN-LINE FLTR 5/16 (Part No.JX-150)
from
$42.99
AT IN-LINE FLTR 5/16
aFe POWER – Oil Filter (Part No.44-LF029-MB)
from
$45.99
Pro GUARD HD Oil Filters deliver increased flow and efficiency that are demanded in today’s vehicles. These oil filters utilize a high performance synthetic media for maximum filtration with minimal flow restriction and are engineered to ISO 4548-12. Direct OE replacement cartridge filter for BMW 11427566327 and includes the required O-rings for a hassle-free installation.
Product Features:
See More
Product Features:
- Designed For Extended Interval Oil Changes
- High Flow Rates And Outstanding Filtration
- Engineered to ISO 4548-12 Standards
- Direct Stock Replacement
Carquest Standard – Oil Filter (Part No.R85374)
from
$4.99
CARQUEST Standard Oil Filters give you the level of quality and application you have come to expect from the CARQUEST name.
Product Features:
See More
Product Features:
- 94.1% efficiency rating at 20 microns
- Meets new car warranty requirements
- Precision coil spring relief valve
- Nitrile anti-drainback valve for engine start-up protection
- Metal end caps
- Cellulose/synthetic blended media
- Internally lubricated gasket
Carquest Standard – Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles (Part No.R84327)
from
$11.99
Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.
Product Features:
See More
Product Features:
- Protection for up to 5,000 miles
- Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
- Nitrile anti-drain back valve for engine start-up protection
- Lathe cut nitrile sealing gasket prevents leaks
- Double fluted spiral wound center tube allows maximum flow and provides additional strength
- Solid steel baseplate provides additional strength to resist leakage
- Meets requirements for maintaining new vehicle warranties
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1002)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-7014)
from
$17.99
K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards.
Product Features:
See More
Product Features:
- High performance design for outstanding filtration
- High-efficiency media with uniform pleats
- Allows for high oil flow rates
- Ideal for high-end synthetic motor oil
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.PS-7014)
from
$16.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More
Carquest Premium – Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.95153)
from
$22.99
Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.
Product Features:
See More
Product Features:
- Protection for up to 10,000 miles
- Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
- Solid metal end caps are designed to be long lasting
- Silicone anti-drain back valve for engine start-up protection
- Heavy-duty steel baseplate provides additional strength to resist leakage
- Heavy gauge steel canister withstands high pressure operating conditions
- Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
- Meets requirements for maintaining new vehicle warranties
- Engineered for use with premium conventional or synthetic oil
Mobil 1 – Oil Filter: Ideal for Synthetic Oil, Protection To 20,000 Miles (Part No.M1C-155A)
from
$19.49
Product Features:
See More
- Protects for 20,000 Miles or up to 1 year
- Tested and proven to protect 2X as long as auto manufacturers’ recommended oil change intervals
- Up to 99% efficiency – synthetic blend media keeps oil cleaner and holds more dirt than economy filters
- Strong, durable components for long lasting performance
- Premium O-ring to help prevent leaks
Purolator ONE – Advanced Protection Oil Filter: Ideal for Hi Mileage & Synth. Oil, Protects to 15,000 miles (Part No.PL18181)
from
$21.99
PurolatorONE Oil Filters keep engines operating at peak performance with up to 99% Dirt Removal Power. Available for most domestic and import applications, PurolatorONE optimizes engine life for up to 15,000 miles of advanced protection for most vehicles on the road today. Made with a high-density synthetic blend filter media and wear-resistant metal end caps, PurolatorONE maintains its integrity and filtering capabilities between oil changes. PurolatorONE is ideal for a wide range of tough driving conditions, including towing, stop and go traffic, commuting and harsh weather conditions. Offers advanced engine protection, especially when used with all synthetic and high mileage oils.
Product Features:
See More
Product Features:
- Up to 15,000 miles – advanced engine protection
- Ideal for all synthetic and high mileage oils
- 99% Dirt Removal Power
- High-density synthetic blend media
- Silicone anti-drainback valve prevents dry starts
- PTFE treated gasket; Heat resistant – stays flexible for advanced leak protection
- Metal end caps provide stability and integrity for greater wear resistance
FRAM Drive – Cartridge Oil Filter: Ideal for Conventional Oil, Protection up to 7,500 miles (Part No.FD10075)
from
$15.99
FRAM Drive is the perfect oil filter for everyday driver. Designed with OE grade synthetic blend media and compatible with both conventional and synthetic oil types, FRAM Drive keeps engine protected for up to 7,500 miles (12,000 kilometers). FRAM Drive is engineered to withstand high temperatures and endure working pressures common in todays engines.
Product Features:
See More
Product Features:
- Proven protection for up to 7,500 miles
- Engineered for use with synthetic or conventional motor oil
- Precision Relief Valve provides consistent oil flow, even in cold conditions
- Designed for everyday drivers who perform oil changes at OE (original equipment) recommended intervals
Carquest Premium – Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.85374)
from
$12.29
Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.
Product Features:
See More
Product Features:
- Protection for up to 10,000 miles
- Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
- Solid metal end caps are designed to be long lasting
- Silicone anti-drain back valve for engine start-up protection
- Heavy-duty steel baseplate provides additional strength to resist leakage
- Heavy gauge steel canister withstands high pressure operating conditions
- Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
- Meets requirements for maintaining new vehicle warranties
Carquest Premium – Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.84327)
from
$16.99
Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.
Product Features:
See More
Product Features:
- Protection for up to 10,000 miles
- Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
- Solid metal end caps are designed to be long lasting
- Silicone anti-drain back valve for engine start-up protection
- Heavy-duty steel baseplate provides additional strength to resist leakage
- Heavy gauge steel canister withstands high pressure operating conditions
- Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
- Meets requirements for maintaining new vehicle warranties
Popular 1982 BMW 320i Filters and PCVs Categories
1982 BMW 320i Filters and PCVs
You count on your 1982 BMW 320i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Filters and PCVs. With 15 Filters and PCVs ranging in price from $2.89 to $93.99, you’re sure to find everything you need for your 1982 BMW 320i.
Brands matter. If you want to shop a specific Filters and PCVs brand, we stock 8 different brands like K&N, ATP, and Carquest Premium. 1982 BMW 320i Filters and PCVs start as low as $2.89!
One of the best ways to find top quality OEM or aftermarket Filters and PCVs is by asking professionals. Short of that, you can shop with confidence thanks to our 131 extensive product reviews on 1982 BMW 320i Filters and PCVs.
Did we mention you can order your Filters and PCVs from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Filters and PCVs inventory for your 1982 BMW 320i below to get started!
Top-Rated Filters and PCVs Brands For Your 1982 BMW 320i
Trusted Filters and PCVs OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 BMW 320i running right for years to come. In our inventory you’ll find brands like K&N, ATP, Carquest Premium, and even more.
Popular K&N Filters and PCVs
You’ll find popular K&N brand products across Oil Filters. All are waiting to get your 1982 BMW 320i back on the road. Some of the top-rated K&N products in these categories are:
from
$17.99
(131)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Oil Filters
FAQs for 1982 BMW 320i Filters and PCVs
What are the most purchased Filters and PCVs for the 1982 BMW 320i?
Out of 15 Filters and PCVs for the 1982 BMW 320i, the most popular in our inventory are:
from
$12.29
This product is not rated
Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles
Oil Filters
from
$3.99
This product is not rated
Standard Engine Oil Drain Plug: M12-1.50 Thread, 15 mm Head, 1 Pack
Oil Pan Drain Plugs
