2017 Ford F-450 Super Duty Body Parts

If you are looking for tailgate operation so smooth you could virtually use a single finger, then Dee Zee Tailgate assist is the choice for you. It allows easy operation, even when your hands are full, and avoid the bone-jarring thud from your truck bed slamming down. This simple addition can extend the longevity of your tailgate and ensure the safety of operators, including children looking to lend a helping hand. Our single dampened gas shock is extensively tested and works in conjunction with factory cables.

Product Features:

• Safely Controls The Drop Rate Of Your Tailgate
• Designed Specifically For Each Make And Model
• Tested To Handle Heavy Daily Use
• Works In Conjunction With Factory Cables
• Easy, No Drill Installation With Simple Hand Tools

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

Powerful, definitive and uncompromising as a mountain ridge, ARIES RidgeStep running boards are made for those who gets it done, day after day. With their solid, all-steel construction, non-skid treads and tough powder coat finish, RidgeStep running boards are made to finish the job. Installation of these running boards is easy and secure because they use the ARIES VersaTrac mounting system. The underside of each board is equipped with a channel that accepts a set of heavy-duty bracket inserts. The inserts move along the channel to fit your truck, and the mounting hardware provides a secure attachment. These running boards are designed to fit specific years of the Ford F-150, F-250 Super Duty, F-350 Super Duty, F-450 Super Duty and F-550 Super Duty (NOTE: This set of running boards includes vehicle-specific VersaTrac mounting brackets. See the application information to verify compatibility with your vehicle). ARIES RidgeStep running boards are not only made for easier installation, but they are also built to face the harsh elements of the commercial job. They feature high-strength, solid steel construction for a step that can keep up with those steel-toe boots, and they are completely without plastic parts, meaning they will not crack or fade over time. Their stamped, all-steel tread offers a 6-1/2″ wide, non-skid surface that will never wear down no matter how many times you climb in and out of your truck. The end caps are also made from steel and are welded to contour to the body of your truck for a professional finish. RidgeStep running boards come with a unique E-coat and textured black powder coat finish to not only withstand rust but also to hide minor scratches and grime.

Product Features:

• High-strength, all-steel construction with no plastic parts
• Angular design for a tough, no-nonsense look on hardworking trucks
• Stamped steel treads for a non-skid step that will never wear or crack
• Flat profile and 6-1/2″ width provide a comfortable step
• Textured black powder coat easily hides minor scratches and grime
• Dual-layer E-coat and powder coat finish for maximum corrosion resistance
• Welded steel end caps for a durable accent
• VersaTrac mounting system for easy installation and vehicle customization
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step

RUNNING BOARDS

Dee Zee Brite-Tread Running Boards Get a step up into your vehicle while adding styling and protection. Constructed of heavy Gauge Brite-Tread aluminum. BriteGard powder coat finish helps aluminum stay looking new. Raised tread surface provides secure footing as you enter and exit. Sturdy bracing and hardware is coated to help prevent rust and keep your boards strong. Cab Section Only (matching bed section may be available).

Product Features:

• The Classic Style That Started It All For Dee Zee
• Non Rusting Brite Tread Aluminum Construction Provides Excellent Footing
• BriteGard Powder Coating Prevents Oxidation
• Raised Tread Surface Provides Secure Footing As You Access Your Bed

The ARIES 3″ bull bar is made for those who face the uncertain road without fear. This particular model is constructed from 304 stainless steel. 304 stainless is high in nickel content, allowing the bull bar to easily resist water, road salt and rust and maintain its mirror-like polished finish in spite of the elements. Other available finishes include high-gloss black stainless steel, textured black steel and semi-gloss black steel. Customizing the look of your vehicle is simple with the ARIES 3″ bull bar. It is equipped with pre-drilled light mounting holes and a removable skid plate. The center crossbar features two pre-drilled holes that readily accept an LED light bar or two LED work lights. The skid plate is made from 304 stainless steel and has a brushed finish to stop rust and hide scratches and scuffs. It also features an aggressive, ARIES-exclusive cutout pattern and can be removed for a customized look. Each ARIES 3″ bull bar is made a vehicle-specific design, meaning that for each make and model, the bull bar has a custom bend and unique mounting brackets. This allows for the best possible fit on your vehicle and ensures solid attachment. The brackets also use pre-existing factory holes in the vehicle’s frame to eliminate drilling, speed up installation and increase rigidity. This bull bar fits select model years of the Ford F-250 Super Duty and F-350 Super Duty (see application info to verify fitment).

Product Features:

• 3″ diameter, heavy-wall tube design
• 304 stainless steel construction to be strong and truly rust-resistant
• Mirror-like polished stainless steel finish for a bright, clean accent
• Two pre-drilled holes in the crossbar for mounting LED light bars or work lights
• Removable, brushed 304 stainless steel skid plate deflects small road debris
• No-drill, vehicle-specific application for a custom fit

BULL BARS

BULL BARS

These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES 6″ oval side bars. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of ARIES 6″ ovals, you get a custom fit for your unique truck or SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options.

Product Features:

• No-drill, vehicle-specific application for a custom fit
• Compatible with 6″ oval track mounting system for easy, secure installation
• Heavy-duty steel construction with a durable black powder coat finish

Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:

• Required Part For Oval Tubes
• Vehicle Specific Mount Kit Insures Proper Fit
• 5 Year Warranty

These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES 6″ oval side bars. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of ARIES 6″ ovals, you get a custom fit for your unique truck or SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options.

Product Features:

• No-drill, vehicle-specific application for a custom fit
• Compatible with 6″ oval track mounting system for easy, secure installation
• Heavy-duty steel construction with a durable black powder coat finish

Dee Zee Red Label Chest is the perfect solution. Constructed of heavy duty Brite-Tread aluminum it can take a serious amount of abuse. A crown style lid with a full pan double-V stiffener offers superior rigidity for whatever you decide throw at it. Lockable stainless steel paddle handles keep your items safe and secure from the types of people your mother warned you about. Dampened gas shocks and adjustable strikers keep lid operation smooth and effortless. What good is a utility chest if it turns into a kiddie pool every time it rains. that is why we fortify our Red Label Series with closed cell foam gasket to keep outside elements where they belong. Our Red Label Utility Chest is forged out of non-rusting .056 Brite-Tread aluminum using internal bends for superior strength to create a box that can withstand years of abuse.

Product Features:

• Paddle Handles With Guide Plate- Lockable, Stainless Steel Handles
• Lockable Stainless Steel Paddle Handle Latch
• Slanted Front To Avoid The Wheel Wells Or Traditional Square
• Closed Cell Foam Gaskets- Helps Keep The Elements Out Of The Box
• Front, Back, And Bottom All One Piece For Increased Body Strength
• Dampened Gas Shocks Open At A Steady, Controlled Rate And Removable Plastic Tool Tray To Keep Smaller Items Organized
• Full Length Piano Hinge For Extra Strength
• Front, Back And Bottom Are Bent From A Single Piece Of Aluminum

Cracked or broken truck bed rail cover causing damage to the paint and bodywork? Preserve the truck bed with this direct-replacement bed molding. This textured plastic trim matches the appearance of the original part and restores protection.

Product Features:

• Direct replacement – this truck bed rail cover replaces the original part and matches the original color and texture
• No special tools required – integrated retaining tabs require no hardware to install
• Durable construction – this bed rail protector is made of UV-resistant plastic
• Quality tested – this part has undergone vehicle try-on testing to ensure proper fit

CURT 5th wheel base rails are industry-standard, meaning they can be used with any 5th wheel trailer hitch with industry-standard anchoring points. They are compatible with virtually all CURT 5th wheel trailer hitches and many competitors. Installation of CURT universal 5th wheel base rails is quick and simple. They mount with high-strength hardware, providing a solid mounting place for a new 5th wheel hitch. 5th wheel base rail bolts and other hardware can also be purchased separately to aid in reinstalling used rails. To protect our 5th wheel base rails from corrosion, scratches and UV damage, we coat each one in a co-cured finish of A-coat and powder coat. This gives them the tough skin they need for hauling that RV trailer, flatbed or other heavy-duty trailer and gives you the confidence to tow wherever the horizon leads. This set of 5th wheel rails is rated for 25,000 pound gross trailer weight and has a gloss black finish. Knowing that your 5th wheel trailer hitch is properly mounted in your truck bed is vitally important to the success of your towing. Without a firm attachment point, a 5th wheel hitch is rendered useless to your tow vehicle. When you choose a 5th wheel hitch for your pickup, install it with confidence with a CURT 5th wheel bracket kit and a set of CURT 5th wheel base rails.

Product Features:

• Helps provide a solid mounting point for a 5th wheel hitch
• Industry-standard mounting point to accept most 5th wheel hitches
• Designed for use with select CURT custom 5th wheel brackets
• Protected by a durable gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat

Cracked or broken truck bed rail cover causing damage to the paint and bodywork? Preserve the truck bed with this direct-replacement bed molding. This textured plastic trim matches the appearance of the original part and restores protection.

Product Features:

• Direct replacement – this truck bed rail cover replaces the original part and matches the original color and texture
• No special tools required – integrated retaining tabs require no hardware to install
• Durable construction – this bed rail protector is made of UV-resistant plastic
• Quality tested – this part has undergone vehicle try-on testing to ensure proper fit

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• Q235A Steel Finished With A Black Powder Coat Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
• Steel Mounting Brackets Are Included To Install Steps With Ease: Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

ARIES 3″ side bars add a custom look and dependable footing to your truck, Jeep or SUV. They feature a classic style, a strong design and non-skid step pads. ARIES nerf bars are all made vehicle-specific for a custom, no-drill fit, and they are available in multiple finish options. This set of nerf bars is constructed from 304 stainless steel with a polished finish. Our 304 stainless steel is a true stainless with high nickel content, offering better corrosion resistance and a long-lasting finish. The polish is a triple application, resulting in a mirror-like shine to complement your vehicle. ARIES 3″ round side bars also come with high-strength steel brackets and non-skid step pads. The mounting brackets — as well as the side bars and step pads — are custom-designed for specific makes and models to allow the nerf bars to contour to the lines of your vehicle. This ensures easy, no-drill installation and the strength necessary to provide solid footing. This particular set of custom nerf bars fits specific years of the Ford F-150, F-150 Lightning, F-250 Super Duty and F-350 Super Duty (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of polypropylene. These wide, custom-positioned step pads feature a textured pattern and cover a wide portion of the tubes to be more comfortable and high-traction, even in wet conditions.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• 304 stainless steel construction to be strong and truly rust-resistant
• Mirror-like polished stainless steel finish for a bright, clean accent
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

For solid footing, a comfortable step and a bold look for your truck, ARIES 6″ oval side bars are a step up. They are designed to mimic the style popular original equipment side bars and running boards, featuring two professional finish options, large non-skid step pads and tapered end caps. This particular pair of 6″ ovals is made with 304 stainless steel, meaning they are high in nickel content to be truly resistant to rust and corrosion. For a lasting shine and a bright accent on your vehicle, they are given a highly polished, mirror-like finish. They are also available in semi-gloss black powder-coated aluminum. To protect the interior of the tubes, all 6″ oval sides are equipped with hard ABS plastic end caps. The end caps come pre-attached to the tubes and feature a tapered design, lending to the overall OE look of the side bars and providing a professional finishing touch on your truck or SUV. For a sure step every time you climb into your vehicle, ARIES 6″ ovals are equipped with extra-wide step pads. The step pads are made from tough polypropylene and provide a generous 5″ width. The large, flat surface offers comfortable footing and has a textured surface to prevent slipping, even when wet. The polypropylene construction makes the step pads durable and crack-resistant for long-lasting use. ARIES 6″ oval side bars are also made for easy, no-drill installation. The boards themselves feature a track system for versatile application, and they mount using vehicle-specific brackets for a custom fit. The mounting brackets are made from high-strength carbon steel and use pre-existing holes to eliminate drilling during the installation process (NOTE: Mounting brackets for these side bars are sold separately. See the application information to find which brackets and side bars fit your vehicle).

Product Features:

• 6″ wide, OE-style tube with hard ABS plastic end caps
• 304 stainless steel construction to be strong and truly rust-resistant
• Mirror-like polished stainless steel finish for a bright, clean accent
• Extra-wide, non-skid step pads for safe, comfortable entry and exit
• Universal track mounting system for easy, secure installation
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look doesn’t have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• Q235A Steel Finished With A Gloss Black Powder Coat Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
• Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

For solid footing, a comfortable step and a bold look for your truck, ARIES 6″ oval side bars are a step up. They are designed to mimic the style of popular original equipment side bars and running boards, featuring two professional finish options, large non-skid step pads and tapered end caps. This particular pair of 6″ ovals is made with aluminum alloy to be strong and lightweight. Aluminum construction makes them completely impervious to rust, and for an extra layer of corrosion protection, they come with a durable semi-gloss black powder coat finish. They are also available in polished 304 stainless steel. To protect the interior of the tubes, all 6″ oval sides are equipped with hard ABS plastic end caps. The end caps come pre-attached to the tubes and feature a tapered design, lending to the overall OE look of the side bars and providing a professional finishing touch on your truck or SUV. For a sure step every time you climb into your vehicle, ARIES 6″ ovals are equipped with extra-wide step pads. The step pads are made from tough polypropylene and provide a generous 5″ width. The large, flat surface offers comfortable footing and has a textured surface to prevent slipping, even when wet. The polypropylene construction makes the step pads durable and crack-resistant for long-lasting use. ARIES 6″ oval side bars are also made for easy, no-drill installation. The boards themselves feature a track system for versatile application, and they mount using vehicle-specific brackets for a custom fit on certain years of the Ford F-150, F-250 Super Duty, F-350 Super Duty, F-450 Super Duty and F-550 Super Duty (see application info to verify fitment). The mounting brackets are made from high-strength carbon steel and use pre-existing holes to eliminate drilling during the installation process.

Product Features:

• 6″ wide, OE-style tube with hard ABS plastic end caps
• Aluminum alloy construction to be lightweight and rust-free
• Durable semi-gloss black powder coat finish for maximum corrosion resistance
• Extra-wide, non-skid step pads for safe, comfortable entry and exit
• Universal track mounting system for easy, secure installation
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

• Vehicle Specific Mounting Kit Required; Sold Separately
• 4 in. Oval Tube
• Injection Molded Polymer Step Pad
• Molded Oval End Caps
• Bolt-On Installation; No Drilling Required
• 3 Year Warranty

HDX Commercial Grade Headache Rack protects your rear window from potential damage from shifting cargo. Welded tie-off hooks for securing your load are standard on all applications. Angled louvers keep sunlight out the cab cool and prevent UV damage to your interior all while allowing unobstructed visibility. 4 mount tabs give you the option of adding safety lights or accessories. Accommodates all major brand tool boxes. 2 diameter round top tube makes it easy to slide ladders

Product Features:

• Provides The Protection Heavy Trucks Require
• 1 Piece Welded Construction
• Full Louvered Window Protection
• Includes Rope Tie Off Hooks
• Has Opening For Rear Light
• Contoured Body Frame
• Mounts For Light Tabs

HDX Commercial Grade Headache Rack protects your rear window from potential damage from shifting cargo. Welded tie-off hooks for securing your load are standard on all applications. Angled louvers keep sunlight out the cab cool and prevent UV damage to your interior all while allowing unobstructed visibility. 4 mount tabs give you the option of adding safety lights or accessories. Accommodates all major brand tool boxes. 2 diameter round top tube makes it easy to slide ladders

Product Features:

• Provides The Protection Heavy Trucks Require
• 1 Piece Welded Construction
• Full Louvered Window Protection
• Includes Rope Tie Off Hooks
• Has Opening For Rear Light
• Contoured Body Frame
• Mounts For Light Tabs

Protect your rear cabin window from road hazards and shifting cargo with Westin’s all new HLR Truck Rack.  Whether you are a contractor or just looking for a multi-functional headache rack to secure your cargo, Westin’s HLR Truck Rack is the logical solution.  This lightweight extruded aluminum headache rack design combines safety, style, visibility and durability into a great looking upgrade to your truck. Accessorize your HLR Truck Rack with a variety of options to secure ladders, lights, beacons and tie-downs using our unique bolt on channel system design. HLR also comes standard with the ladder side load brackets included for added functionality.  It accommodates most tool boxes and can be easily installed at home without drilling on most applications using factory holes. The weather resistant finish stands up to the elements, and comes standard in a black powder coat finish. Don’t settle for less when the answer is obvious – Westin’s HLR Truck Rack!

Product Features:

• HLR Truck Rack; Black Powder Coat
• Extruded Aluminum Frame
• Aluminum Punch Plate Screen
• Protects Rear Window Without Blocking View
• Strong Sturdy And Lightweight Design
• Incl. Channels To Bolt On Various Accessories
• Mild Steel Custom Designed Brackets
• Easy Installation Using Factory Holes
• No Drilling For Most Applications

For the heavy-duty hauler and hardworking trailer blazer, a headache rack is a must-have truck accessory. It does not take much for a two-by-four, steel pipe or other loose cargo to put a good size crack in the rear window of your truck cab, especially when you stick to the off-road trail more than the paved road. The ARIES classic headache rack offers a hardy design and sturdy structure to make sure your truck is ready to work. Made from 1″ x 2″ carbon steel tubing, ARIES classic headache racks provide excellent protection for your truck cab, from both the heat of the sun and potential impact from unsecure cargo in your truck bed. The full louvers help keep your cab cooler throughout the day, and their heavy-duty construction helps block any damage from behind. The ARIES classic headache rack also features a dual-layer E-coat and semi-gloss black powder coat finish to maintain its sleek appearance, preventing damage from rust, scratches and UV rays. Installation is quick and easy with the ARIES headache rack. It is compatible with cross-bed truck tool boxes and includes all necessary hardware for a complete installation. When your pickup truck is more than just a show horse, ARIES has you covered. We understand that it’s about more than goofing off in the mud. When you have a job to finish and a workhorse to drive, an ARIES classic headache rack is a reliable tool in your belt.

Product Features:

• Heavy-duty 1″ x 2″ steel tube construction for a solid frame
• Dual-layer E-coat and black powder coat finish for maximum corrosion resistance
• Fully louvered center section to protect the cab and passengers
• Louvers also help keep the cab cooler by blocking direct sunlight
• Flat steel brackets bolt onto the truck bed walls (drilling may be required)
• Compatible with most crossover truck tool boxes