2016 Ford Explorer Cooling and Climate Controls

Name: Multi-Purpose Relay
Brand: Carquest Premium
SKU: RAA1257
Price: 62.99 USD

Below you will find various in-demand Ford Cooling and Climate Controls, components and accessories for your 2016 Explorer. Advance Auto Parts has popular Explorer parts like Air Conditioning Parts, Blend Doors, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Explorer model years including 2014, 2015, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2016 Ford Explorer Cooling and Climate Controls below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2016 Ford Explorer Cooling and Climate Controls Categories

Radiators

Water Pumps

AC Compressor With Clutch

Thermostat and Water Outlet Assemblies

Air Blend Door Actuators

Coolant Reservoirs

AC Compressor Relays

Coolant Temperature Sensors

Heater Cores

Coolant Reservoir Caps

Water Outlets

Engine Coolant Pipe O-Rings

Blower Motor Resistors

AC Condensers

AC Compressor Cut-Out Relays

AC Caps and Valve Core Kits

Thermostat Housings

Thermostat Seals

Accumulator and Receiver Driers

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

AC O-Ring and Gasket Kits

AC Suction Lines

Blower Motor Resistor Connectors

Water Pump Gaskets

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Radiator Shutter Assemblies

Radiator Drain Plugs

AC Compressor Cut-Off Switches

AC Compressor Clutch Connectors

AC Refrigerant Pressure Sensors

AC Service Valve Caps

Radiator Cap Tester Adapters

Water Pump O-Rings

AC Receiver or Drier

HVAC Air Door Actuator Kit

Essential Cooling and Climate Controls for 2016 Ford Explorers

from

$62.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$43.99

New Standard Replacement Block Expansion Valve

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$599.99

This radiator shutter assembly matches the fit and function of the original equipment shutter to restore function to the vehicle’s active grille shutter system. This assembly features a factory-style connector for a plug-and-play installation.

Product Features:

Ideal replacement – this active grille shutter and motor assembly precisely matches the original equipment assembly on specific makes and models
Plug & play installation – this grille shutter assembly is made with a factory-style electrical connector for a trouble-free installation
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$39.99

REGULATOR AND MTR

from

$44.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$109.99

Carquest Premium heater cores use advanced engineering methods together with innovative manufacturing technology resulting in a product that meets or exceeds form, fit, and function.

Product Features:

Designed to keep your A/C system in top shape and built to provide long-lasting service.
Our advanced engineering methods coupled with our innovative manufacturing technology provide products to the aftermarket that meet or exceed form, fit, and function of OEM parts.
Our advanced engineering methods coupled with our innovative manufacturing technology provide products to the aftermarket that meet or exceed form, fit, and function of OEM parts.

from

$32.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to ensure proper air/fuel ratio along with proper operation of the cooling fans and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$15.49

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The HVAC Pressure Sensor/Switch monitors the refrigerant pressure within the air conditioning system, ensuring optimal performance and preventing potential system damage, which enhances climate control and passenger comfort. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$388.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$24.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications
All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications

from

$45.99

This 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles
Ideal solution – this socket is a reliable replacement for an original socket that is damaged or has failed due to fatigue or electrical malfunction
Durable construction – this socket is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$21.99

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$19.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$87.99

New Platinum Pro Coolant Recovery Tank, With Cap

Product Features:

With Cap, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$46.49

We are proud to offer this Carquest product line: Carquest Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Direct-fit replacement for ease of installation
Coated with corrosion and rust inhibitor
100% leak tested
Meets and/or exceeds OEM standard
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation

from

$46.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$14.99

Cracked or lost the original engine coolant reservoir cap- Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$178.99

New Platinum Pro Radiator And Condenser Fan Assembly, For Turbocharged Engine

Product Features:

For Turbocharged Engine, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$52.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$5.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$90.99

This kit contains air door actuators designed to ensure the proper flow and blend of air between modes that can include fresh air/recirculation, hot/cold, and floor vent/defrost. The actuators in this kit are engineered for specified vehicles.

from

$22.99

This radiator cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this radiator cap is designed to match the fit and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original cap that is missing, leaking or failed due to gasket fatigue and heat
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$239.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels.
It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
This debris may not be able to pass through the micro-channels and may cause the condenser to perform poorly or fail.
This condenser has a drier attached to it with an interior desiccant bag that meets or exceeds OEM specifications.
This condenser has an integrated transmission oil cooler that combines the cooling features of two separate systems, oil and refrigerant.
Each system operates separately and are tested rigorously to ensure no leaks occur between them.
Each condenser uses only the highest quality raw materials to ensure the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100 percent of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each condenser is packaged in the box with internal protection that protects the condenser to keep the part in place, centered and away from the package edges.

from

$26.49

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$7.49

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$2.99

THERMOSTAT O-RING

from

$5.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Upgrade your 2016 Ford Explorer with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2016 Ford Explorer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Explorer functioning at its best. At Advance Auto Parts, we offer a wide selection of 98 Cooling and Climate Controls for the 2016 Ford Explorer, designed to meet your needs without breaking the bank. From Air Conditioning Part replacements to Blend Doors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2016 Ford Explorer at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $2.99 to $643.99, with an average price of $109.04. Our 98 Cooling and Climate Controls in stock come from 10 trusted brands, so you’re sure to find the right part for your 2016 Ford Explorer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2016 Ford Explorer, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Felpro, Carquest Premium, Dorman, and more. Felpro Cooling and Climate Controls start at just $2.99 and boast an impressive 4.6 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Cooling and Climate Controls available starting at $10.99, and at an average 4.4 stars rating. With 1,271 customer reviews and counting, our 2016 Ford Explorer Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2016 Ford Explorer is always ready to roll. We’re committed to providing you with everything you need to keep your Explorer in top shape, all in one place. Start shopping confidently below for your 2016 Ford Explorer!

Best-Selling Air Conditioning Parts for 2016 Ford Explorers

Enhance the driving experience in your Ford with 33 quality Air Conditioning Part components, starting at $4.99.

show more show less

from

$17.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$19.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$33.49

ACDelco Professional Multi Purpose Relay is a high quality aftermarket replacement component for one or more of the following vehicle systems: hvac. This premium aftermarket relay is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$388.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$209.99

This is a parallel flow condenser that contains small micro-channels.
It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
This debris may not be able to pass through the micro-channels and may cause the condenser to perform poorly or fail.
This condenser has a drier attached to it with an interior desiccant bag that meets or exceeds OEM specifications.
This condenser has an integrated transmission oil cooler that combines the cooling features of two separate systems, oil and refrigerant.
Each system operates separately and are tested rigorously to ensure no leaks occur between them.
Each condenser uses only the highest quality raw materials to ensure the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100 percent of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each condenser is packaged in the box with internal protection that protects the condenser to keep the part in place, centered and away from the package edges.

from

$119.99

New Platinum Pro A/C Condenser, With Trans Oil Cooler, 3.5 Liter V6 Engines

Product Features:

With Trans Oil Cooler, 3.5 Liter V6 Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$29.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$319.99

This is a parallel flow condenser that contains small micro-channels.
It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
This debris may not be able to pass through the micro-channels and may cause the condenser to perform poorly or fail.
This condenser has a drier attached to it with an interior desiccant bag that meets or exceeds OEM specifications.
This condenser has an integrated transmission oil cooler that combines the cooling features of two separate systems, oil and refrigerant.
Each system operates separately and are tested rigorously to ensure no leaks occur between them.
Each condenser uses only the highest quality raw materials to ensure the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100 percent of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each condenser is packaged in the box with internal protection that protects the condenser to keep the part in place, centered and away from the package edges.

from

$45.99

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$45.99

Direct replacement – this 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles
Ideal solution – this socket is a reliable replacement for an original socket that is damaged or has failed due to fatigue or electrical malfunction
Durable construction – this socket is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$76.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$58.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$239.99

This is a parallel flow condenser that contains small micro-channels.
It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
This debris may not be able to pass through the micro-channels and may cause the condenser to perform poorly or fail.
This condenser has a drier attached to it with an interior desiccant bag that meets or exceeds OEM specifications.
This condenser has an integrated transmission oil cooler that combines the cooling features of two separate systems, oil and refrigerant.
Each system operates separately and are tested rigorously to ensure no leaks occur between them.
Each condenser uses only the highest quality raw materials to ensure the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100 percent of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each condenser is packaged in the box with internal protection that protects the condenser to keep the part in place, centered and away from the package edges.

from

$128.99

New Platinum Pro A/C Condenser, Police Models With 3.7 Liter V6 Engines

Product Features:

Police Models With 3.7 Liter V6 Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$66.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$44.99

Carquest A/C Accessories provide a comprehensive offering of premium quality fittings and tools to service all aspects of an a/c service from the most simple fitting replacement to complex diagnostics required for late model applications.

from

$39.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$643.99

Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:

Complete A/C Repair Kit includes compressor (T198342), accumulator/receiver drier (T83272), front expansion device (T39481), rear expansion device (T39436), 2 bottles of refrigerant oil (T59007), and application specific o-rings / gaskets.
Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators are helium leak tested prior to packaging.
Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
The specific PAG oil required by your vehicle application is included.
O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

from

$618.99

A/C COMPRESSOR

from

$503.99

A/C COMPRESSOR

from

$483.99

A/C CONDENSER

from

$443.99

New Compressors come with direct fit connectors for ease of installation and to help eliminate splicing.

Product Features:

All compressors go through sophisticated testing and leak test processes
Includes specific electrical connector to eliminate splicing
For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
Each unit is individually leak, vacuum and pressure tested prior to packaging to ensure leak free performance
New Compressors meet or exceed OE specifications
New Compressors are validated for the equivalent of 100,000 miles
New Compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
New Compressors come with direct fit connectors for ease of installation and to help eliminate splicing
New Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor

from

$290.99

A/C CONDENSER

from

$253.99

A/C CONDENSER

Top Picks for 2016 Ford Explorer Heating Parts

Upgrade Ford Explorers with top-quality Heating Parts parts, including 3 OEM and aftermarket selections for your 2016 model.

show more show less

from

$152.99

Designed to keep your A/C system in top shape and built to provide long-lasting service.
Our advanced engineering methods coupled with our innovative manufacturing technology provide products to the aftermarket that meet or exceed form, fit, and function of OEM parts.
Our advanced engineering methods coupled with our innovative manufacturing technology provide products to the aftermarket that meet or exceed form, fit, and function of OEM parts.

from

$107.99

Designed to keep your A/C system in top shape and built to provide long-lasting service.
Our advanced engineering methods coupled with our innovative manufacturing technology provide products to the aftermarket that meet or exceed form, fit, and function of OEM parts.
Our advanced engineering methods coupled with our innovative manufacturing technology provide products to the aftermarket that meet or exceed form, fit, and function of OEM parts.

from

$91.99

Designed to keep your A/C system in top shape and built to provide long-lasting service.
Our advanced engineering methods coupled with our innovative manufacturing technology provide products to the aftermarket that meet or exceed form, fit, and function of OEM parts.
Our advanced engineering methods coupled with our innovative manufacturing technology provide products to the aftermarket that meet or exceed form, fit, and function of OEM parts.

In-Demand Engine Cooling Parts for 2016 Ford Explorers

Select from 50 premium Engine Cooling Parts parts for your 2016 Ford Explorer, with prices ranging from $2.99 to $599.99.

show more show less

from

$72.99

This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Additional Notes: Includes gasket

from

$2.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$11.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$10.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$16.99

Cracked or lost the original engine coolant reservoir cap- Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$10.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$5.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$11.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$7.49

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$111.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part
Ideal solution – engineered for a seamless installation
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$31.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$6.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$302.99

Carquest Premium Radiators offer one of the largest product ranges in the aftermarket, covering more than 95% of the popular automotive and light truck applications. Carquest Premium Radiators meet or exceed original equipment specifications, ensuring that products fit and perform just as well or better than the original parts, providing you peace of mind.

Product Features:

Our B-type tubes feature central reinforcement to provide greater tolerance to pressure. Stronger tube design means drastically reduced probability of tube failure.
Our deep extrusion header provides a stronger tube to header joint which is more resistant to the effects of vibration and thermal tube expansion, virtually eliminating tube to header leaks.
Our fin edges are folded for increased stability and heat disbursement properties.
Our included “multi-fit” attachments allow one radiator to cover multiple vehicle applications without sacrificing OE fit. This results in wider vehicle coverage with substantially less inventory.
Thermal expansion cuts allow for longer life and reduce failure rates by allowing improved core expansion and contraction during normal heat cycles.
We design and manufacture all our radiators to meet or even exceed Original Equipment specifications. We take pride in producing the most reliable replacement parts in the market.
We use longer header tabs for increased pressure resistance. This reduces the potential for tank to header leaks.

from

$8.49

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$11.49

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$87.99

New Platinum Pro Coolant Recovery Tank, With Cap

Product Features:

With Cap, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$47.99

This replacement engine coolant water outlet is engineered to match the fit and durability of the stock engine coolant water outlet on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant water outlet directly replaces the original water outlet on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement water outlets

from

$32.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$9.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$2.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$347.99

Original engine cooling fans often burn out prematurely because they’re under-engineered for extreme duty. This Dorman OE FIX solution features a brushless motor and more durable fan blade to dramatically extend service life under intense use.

Product Features:

Upgraded design – this replacement dual radiator fan assembly features multiple enhancements over original equipment to improve longevity and performance
Ideal for law enforcement – made to endure extreme duty in specific Ford police vehicle applications
Brushless motors – upgraded designs maintain optimal speed at extreme temperatures for longer periods
Strengthened materials – designed with more durable materials to prevent fan breakage and failure

from

$259.99

Our B-type tubes feature central reinforcement to provide greater tolerance to pressure. Stronger tube design means drastically reduced probability of tube failure.
Our deep extrusion header provides a stronger tube to header joint which is more resistant to the effects of vibration and thermal tube expansion, virtually eliminating tube to header leaks.
Our fin edges are folded for increased stability and heat disbursement properties.
Our included “multi-fit” attachments allow one radiator to cover multiple vehicle applications without sacrificing OE fit. This results in wider vehicle coverage with substantially less inventory.
Thermal expansion cuts allow for longer life and reduce failure rates by allowing improved core expansion and contraction during normal heat cycles.
We design and manufacture all our radiators to meet or even exceed Original Equipment specifications. We take pride in producing the most reliable replacement parts in the market.
We use longer header tabs for increased pressure resistance. This reduces the potential for tank to header leaks.

from

$41.99

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$177.99

New Platinum Pro Radiator, 2.0 Liter L4 Turbo

Product Features:

2.0 Liter L4 Turbo, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: 5 Year, Limited
Radiator Cap Not Included
Check Out The Large Selection Of Parts Available For Your Vehicle

Most Sold 2016 Ford Explorer Blower Motor and Related Products

Explore our best-selling Ford parts for the 2016 Explorer among 8 OEM and aftermarket options starting from $76.99.

show more show less

from

$99.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Motor RPM equivalent to or exceeds OEM motor
Engineered for extended durability

from

$76.99

Blower motor resistor fail? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment.

Product Features:

Restores Functionality – Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$112.99

The components in this HVAC blower motor resistor kit are designed to match the performance of the original equipment on specified Ford, Lincoln and Mercury SUVs. The kit includes a resistor and harness pigtail required for most repairs when replacing an overheated or corroded resistor. Please note that the original equipment blower motor has been recalled on these vehicles. This kit will function properly only after the required OE recall repairs have been made.

Product Features:

Direct replacement – the components in this HVAC blower motor resistor kit are designed to match the performance of the original equipment on specified Ford, Lincoln and Mercury SUVs
Complete solution – kit includes a resistor and harness pigtail required for most repairs when replacing an overheated or corroded resistor
Restores functionality – when a factory blower motor resistor fails, this replacement is engineered to help restore proper HVAC operation
OE recall repair required first – the original equipment blower motor has been recalled on these vehicles, and this kit will function properly only after the required OE recall repairs have been made

from

$76.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$198.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$153.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

Product Features:

Same parts that came on the vehicle from the factory.
Permanently lubricated bearings for long life and quiet operation.
Quietly and efficiently moves air needed for heat, ventilation and air conditioning.
Application specific for easy installation.
Tested to ensure quiet operation at a variety of temperature/humidity conditions.
EMC testing ensures compatibility with other vehicle electrical systems.
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

from

$94.99

Backed by the Motorcraft Service Parts, unlimited mileage, limited labor cost and no commercial exceptions. Warranty is supported nationwide by Ford/Lincoln dealers and Ford Authorized Distributors.

Product Features:

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.

from

$91.99

Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

Top-Rated Cooling and Climate Controls Brands For Your 2016 Ford Explorer

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2016 Ford Explorers. Below you’ll find some of our best rated Cooling and Climate Controls from Felpro, Carquest Premium, and Dorman, and more. Cooling and Climate Controls from these brands that fit a 2016 Explorer start at just $2.99 and are rated as high as 4.6 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 2016 Ford Explorer Cooling and Climate Controls

When it comes to maintaining or upgrading your 2016 Ford Explorer, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Cooling and Climate Controls, specifically designed for the 2016 Ford Explorer. With over 2 Felpro brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.99, with an average price of just $7.49. Plus, with over 111 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $11.99

(110)

Multi-Purpose O-Ring

“It work and price was reasonable”

from $2.99

(1)

Multi-Purpose O-Ring

“Always the right part”

Popular Carquest Premium 2016 Ford Explorer Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2016 Ford Explorer owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2016 Explorer, Advance Auto Parts carries a full inventory of 3 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $10.99 to $99.99, plus, with more than 37 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from $10.99

(31)

Standard Thermostat: 180 Degrees

“Good product & worked as expected!”

from $99.99

(3)

Blower Motor: with Wheel

“Blower fan fit great, installed easy and was quite.”

from $72.99

(3)

Engine Water Pump: New, Gasket/Seals Included

“Good”

FAQs for 2016 Ford Explorer Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2016 Ford Explorers?

Out of 98 Cooling and Climate Controls that fit 2016 Ford Explorers, the following parts are the top sellers:

HVAC Blend Door Actuator: 1 Piece (10619811) – $29.99
Standard Reservoir Cap: 16 PSI (17110025) – $10.99
Multi-Purpose Relay (12453407) – $17.99

What’s the price range for 2016 Ford Explorer Cooling and Climate Controls?

Cooling and Climate Control prices for the 2016 Ford Explorer start at $2.99 and go up to $643.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2016 Ford Explorer?

The average price for Cooling and Climate Controls for the 2016 Ford Explorer is $109.04. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Ford Explorer model years?

Yes, we currently carry Cooling and Climate Controls for 33 model years of Ford Explorers between 1991 and 2025. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2015, and 2014.

What are the cheapest Cooling and Climate Controls for my 2016 Ford Explorer?

The cheapest 2016 Ford Explorer Cooling and Climate Controls we carry in stock are:

Multi-Purpose O-Ring (20688821) – $2.99
Engine Coolant Thermostat Housing Gasket (99992752) – $2.99
THERMOSTAT O-RING (50213631) – $2.99
Standard Thermostat: 180 Degrees (11330420) – $4.49
A/C SERVICE VALVE (50154171) – $4.99

What are the top-rated Cooling and Climate Controls that fit the 2016 Ford Explorer?

Out of 1,271 reviews by customers, our 2016 Ford Explorer Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2016 Ford Explorer and their top-rated products:

Engine Cooling Parts
- Engine Water Pump: New, Gasket/Seals Included (11640457) – $72.99
- Multi-Purpose O-Ring (20688821) – $2.99
- Standard Thermostat: 180 Degrees (5650004) – $10.99
Blower Motor and Related Products
- Engine Water Pump: New, Gasket/Seals Included (11640457) – $72.99
- Multi-Purpose O-Ring (20688821) – $2.99
- Standard Thermostat: 180 Degrees (5650004) – $10.99
Blend Doors
- Engine Water Pump: New, Gasket/Seals Included (11640457) – $72.99
- Multi-Purpose O-Ring (20688821) – $2.99
- Standard Thermostat: 180 Degrees (5650004) – $10.99

What types of Cooling and Climate Controls do you sell for my 2016 Ford Explorer?

As of 3/1/26, these are some of the most in-demand types of Cooling and Climate Controls for a 2016 Ford Explorer:

Can I get help with 2016 Ford Explorer Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Cooling and Climate Controls and more.

What is your return policy for Ford Explorer Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Ford Explorer Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2016 Ford Explorer Cooling and Climate Controls

Carquest Premium – Multi-Purpose Relay (Part No.RAA1257)

KAI – A/C Expansion Valve (Part No.ACX011998)

Dorman – Active Grille Shutter with Motor (Part No.601-322)

Motorcraft – REGULATOR AND MTR (Part No.WPT-439)

Carquest Premium – Multi-Use Connector (Part No.PTC1134)

Carquest Premium – HVAC Heater Core (Part No.399240)

NTK – Engine Coolant Temperature Sensor (Part No.EF0106)

Carquest Premium – Air Conditioner Clutch Cycle Switch (Part No.ACA1519)

Carquest Premium – A/C Compressor, New, with Clutch, with 7SBH17 Compressor (Part No.T198358)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26820)

Dorman – Power Outlet Socket (Part No.926-331)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1235)

KAI – Coolant Reservoir (Part No.FO3014136)

Carquest Premium – Coolant Housing/Water Outlet (Part No.84883)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-202)

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54211)

KAI – Rad/Condenser Fan Assembly (Part No.FO3115206)

Carquest Premium – A/C Accumulator (Part No.T83014)

Motorad – Standard Thermostat:: 192 Degrees (Part No.244-192)

Felpro – THERMOSTAT GASKET (Part No.35673)

Dorman – HVAC ACTUATOR KIT (Part No.ADAKIT005)

Dorman – Help – Radiator Cap (Part No.54237)

Carquest Premium – A/C Condenser (Part No.714238)

Dorman – Coolant Housing/Water Outlet: with Housing and Gasket, 15 Degree Neck Angle (Part No.902-1020)

Dorman – Help – Radiator Drain Cocks (Part No.61127)

Motorcraft – THERMOSTAT O-RING (Part No.RG-571)

MAHLE Original – Water Outlet Gasket (Part No.C32197)

Carquest – Multi-Purpose Relay (Part No.83A1002)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1235)

ACDelco – Multi-Purpose Relay (Part No.F1757)

Carquest Premium – A/C Compressor, New, with Clutch, with 7SBH17 Compressor (Part No.T198358)

Carquest Premium – A/C Condenser (Part No.714298)

KAI – A/C Condenser (Part No.CND3911)

Carquest Premium – A/C Expansion Valve (Part No.T39481)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713911)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2012)

Dorman – Power Outlet Socket (Part No.926-331)

Carquest Premium – A/C Receiver Drier with Hose Assembly (Part No.T83272)

Carquest Premium – A/C Receiver Drier / Desiccant Element Header and Filter (Part No.T83187)

Carquest Premium – A/C Condenser (Part No.714238)

KAI – A/C Condenser (Part No.CND4741)

Carquest Premium – A/C Refrigerant Suction Hose (Part No.T56936)

Carquest Premium – A/C System Mounted Pressure Transducer (Part No.T37340)

Carquest Premium – A/C Expansion Valve (Part No.T39436)

Carquest Premium – A/C Replacement Kit (Part No.8406K)

Motorcraft – A/C COMPRESSOR (Part No.YCC-446)

Motorcraft – A/C COMPRESSOR (Part No.YCC-392)

Motorcraft – A/C CONDENSER (Part No.YJ-708)

Carquest Premium – New Compressor with Clutch, Nippondenso 7SBH17 (Part No.T198342)

Motorcraft – A/C CONDENSER (Part No.YJ-690)

Motorcraft – A/C CONDENSER (Part No.YJ-707)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-228)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-234)

Dorman – HVAC ACTUATOR KIT (Part No.ADAKIT005)

Motorcraft – HVAC DFRST MD DR ACT (Part No.YH-1769)

Carquest Premium – HVAC Heater Core (Part No.910558)

Carquest Premium – HVAC Heater Core (Part No.910467)

Carquest Premium – HVAC Heater Core (Part No.1811997)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2327)

Felpro – Multi-Purpose O-Ring (Part No.35772)

Felpro – Multi-Purpose O-Ring (Part No.35489)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.14138)

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54208)

Carquest Premium – Standard Reservoir Cap: 16 PSI (Part No.10238)

MAHLE Original – Water Outlet Gasket (Part No.C32197)

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35934)

Dorman – Help – Radiator Drain Cocks (Part No.61127)

Dorman – Pressurized Coolant Reservoir: Black and White, Plastic, Original Equipment Replacement (Part No.603-364)

Carquest Premium – Coolant Temperature Sensor 1TS1006 (Part No.WTC1011)

Felpro – Engine Coolant Thermostat Gasket (Part No.36111)

Carquest Premium – Radiator (Part No.813364)

Felpro – Engine Water Pump Gasket (Part No.35994)

Felpro – Engine Water Pump Gasket (Part No.35932)

KAI – Coolant Reservoir (Part No.FO3014136)

Dorman – Engine Coolant Water Outlet (Part No.902-684)

Motorad – Integrated Thermostat Housing: With Seal, 180 Degrees (Part No.1010-180)

Felpro – Engine Water Pump Gasket (Part No.35930)

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35839)