2015 Mazda CX-5 Fluids and Chemicals
More 2015 Mazda CX-5 Fluids and Chemicals Categories
If you’re looking for an original Fluids and Chemicals replacement for a 2015 Mazda CX-5, you can search through our selection below. You’ll also find aftermarket and OEM Fluids and Chemicals to meet your needs.
Essential 2015 Mazda CX-5 Fluids and Chemicals
Prestone – DOT 3 Brake Fluid: Synthetic, Prevents Corrosion, Safe For ABS, Disc, Drum Brakes, 50k miles, 32 oz (Part No.AS401)
from
$11.49
Prestone® DOT 3 Motor Vehicle Brake delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 3. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 3 braking systems (ABS, disc or drum) and can mix with any DOT 3 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.
Product Features:
See More
Product Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
Prestone – DOT 3 Brake Fluid: MAX Synthetic, Highest Grade, Superior Protection, 100k miles, 32 oz (Part No.AS410)
from
$12.49
Prestone® MAX DOT 3 Motor Vehicle Brake Fluid is our highest grade formula, maximizing performance vs. DOT standard. Prestone MAX is our best brake fluid at protecting against overheating and brake fade. With 100,000 mile fluid life, our longest life fluid has 2X more miles between replacement than regular Prestone DOT 3. Prestone MAX has superior performance in severe braking conditions when compared to regular Prestone DOT 3, which means even more piece of mind about the braking system. This synthetic fluid starts with our highest dry boiling point giving our best protection against performance decline due to water absorption. Prestone MAX DOT 3 is safe to use in all DOT 3 braking systems, ABS, disc or drum, and can mix with any DOT 3 fluid. Mixing Prestone MAX with other fluids will lower the performance rating for miles and boil points, for best results replace completely with Prestone MAX DOT 3. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.
Product Features:
See More
Product Features:
- 100,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with Our Highest Grade Formula. Prevents corrosion of all metals within the braking system.
- Superior Protection in Extreme Braking Conditions
- Synthetic, Long Life Formula – 2X Longer than regular Prestone DOT 3
Prestone – DOT 3 Brake Fluid: Synthetic, Prevents Corrosion, Safe For ABS, Disc, Drum Brakes, 50k miles, 12 oz (Part No.AS400)
from
$5.29
Prestone® DOT 3 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 3. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 3 braking systems (ABS, disc or drum) and can mix with any DOT 3 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.
Product Features:
See More
Product Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula*
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
FRAM – Antifreeze and Coolant: 50/50 Ready To Use, OE North American Gold, 1 Gallon (Part No.F301)
from
$13.99
Fram Extended Life AMAM Concentrate is compatible with ANY antifreeze/coolant in ANY vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. Prime Concentrate meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up and boil-over protection.
Product Features:
See More
Product Features:
- Formulated to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT & IAT.
- 5 Yr., 150,000 mile Extended life formula.
- Meets or exceeds ASTM D3306 & D4985 for corrosion protection.
- Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
Peak – Original Equipment Asian Green Antifreeze and Coolant: 50/50 Ready To Use, 1 Gallon (Part No.PAGB53)
from
$19.99
PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for ASIAN VEHICLES is a line of premium coolants specifically designed to match the technology and color requirements of Asian vehicles. Each coolant is formulated with the same corrosion inhibitor technology that protected your vehicle straight from the factory. Color cues on the packaging and a list of covered vehicles on the front label make it easy to identify the right match for your specific vehicle. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for ASIAN VEHICLES – GREEN is an ethylene glycol-based antifreeze/coolant specifically developed for use in any Asian vehicle requiring a Green phosphate-enhanced organic acid technology (POAT) formulation. It contains high-quality organic acid corrosion inhibitors and is free of borate, nitrite, silicate and amines chemicals. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for ASIAN VEHICLES – GREEN meets the performance requirements of ASTM D3306 and JIS K2234. With a complete flush and fill, PEAK guarantees this coolant will provide service life protection of up to 150,000 miles or 5 years.
Product Features:
See More
Product Features:
- Matches each Asian vehicle manufacturer’s technology and color requirements
- Protects all cooling system metals from rust and corrosion
- Meets the performance requirements of ASTM D3306 and JIS K2234
- Service life of up to 5 years/150,000 miles with a complete cooling system flush and fill
- Color-coding and vehicle applications listed on the front simplify selecting the right antifreeze/coolant
- Available as both concentrate and 50/50 products to do the job right
- Testing Requirements: For proper freeze and boil over protection, use a traditional refractometer or hydrometer to measure the percentage of ethylene glycol by volume.
Prestone – MAX Antifreeze/Coolant, Asian, Green, 50/50 Premixed, 1 Gallon (Part No.AF6610)
from
$24.29
Prestone® MAX antifreeze + coolant uses Advanced Original Equipment Technology to provide MAXIMUM ENGINE PROTECTION in Asian vehicles requiring Green antifreeze/coolant, guaranteed. Our Advanced Technology formula delivers high performance temperature protection, industry leading protection from engine damaging rust & corrosion and the longest lasting protection in the industry. Trust Prestone – a leading global manufacturer of Original Equipment Antifreeze + Coolant.
Product Features:
See More
Product Features:
- Can top off or replace any Green antifreeze + coolant in all Hyundai; all Kia; all Mazda; all Mitsubishi; Suzuki Pre-2010; Nissan pre-2009; Infiniti pre-2009 & Subaru pre-2009 vehicles, guaranteed.
- High performance temperature protection from deep winter freezes and scorching summer heat.
- Industry leading protection from engine damaging rust, corrosion & buildup. Prestone MAX completely stops the formation of rust & corrosion for better engine performance and longer engine life.
- Prestone Max is guaranteed to protect your vehicle for 15+ years and/or 350,000 miles. It’s the longest fluid life in the industry.
Factory Air – 8 oz. Bottle Premium PAG 46 Oil w/o Dye (Part No.59007)
from
$13.49
Only compatible with R134a refrigerant; Tools required for installation; Plastic bottle; Universal applications
See More
Certified A/C Pro – R-134a PAG 46 AC Oil Lubricant: With ICE 32 For Improved Cooling, 8 oz (Part No.GPL-5)
from
$13.29
Certified A/C Pro R-134a PAG 46 Refrigerant Oil with ICE 32. This product contains approximately 8 fluid ounces of PAG refrigerant oil with ICE32. Low viscosity PAG oil for R-134a auto A/C systems; ISO 46 viscosity. R-134a PAG 46 AC Oil Lubricant: with ICE 32 Lubricant Enhancer features advanced chemistry to help extend compressor life and improve cooling capacity. The PAG oil helps quiet noisy compressors. Meets OEM specifications.
Product Features:
See More
Product Features:
- Low viscosity PAG oil for R-134a auto A/C systems; ISO 46 viscosity
- ICE32 Lubricant Enhancer: advanced chemistry to help extend compressor life and improve cooling capacity
- Meets OEM specifications
FRAM – Full Synthetic Dexron VI Automatic Transmission Fluid: 1 Quart (Part No.F426)
from
$11.79
FRAM DEXRON®-VI FULL SYNTHETIC ATF represents the latest technology in full synthetic automatic transmission fluids. This product is designed for the newest generation of highly efficient transmissions now being installed in most vehicles, and is DEXRON®-VI licensed by GM and meets JASO 1A performance requirements. It is a fuel efficient choice for older models as well, such as those currently using DEXRON®-III. FRAM DEXRON®-VI FULL SYNTHETIC ATF is recommended for use in all GM DEXRON® applications and in transmissions applications calling for Toyota WS, Nissan Matic J and Matic S, Ford part numbers XT-10-QLV and XT-6-QSP, Honda Z-1 and DW 1, and Hyundai SP-VI. Check owner’s manual for specific recommendations.
Product Features:
See More
Product Features:
- Outstanding resistance to oxidative and thermal breakdown.
- Exceptional low temperature fluidity.
- Excellent anti-wear properties.
- Excellent gear shift quality throughout service life.
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
- TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL
Castrol – Transmax ATF Full Synthetic Multi-Vehicle Automatic Transmission Fluid (1 Quart) (Part No.152A76)
from
$12.29
Automatic transmission fluid is a technologically advanced, low viscosity formulation specially designed to deliver performance and maximum fuel efficiency for modern automatic transmissions.
Product Features:
See More
Product Features:
- Full Synthetic, low viscosity formulation
- OEM approved and licensed by Ford (MERCON® LV) and GM (DEXRON® -VI)
- Low viscosity formula for maximum fuel efficiency in modern automatic transmissions
- Enhanced friction durability for smooth transmission performance
- Superior high temperature protection to effectively resist oxidation
- Unsurpassed protection against copper corrosion
- Industry Specifications and OEM Approvals: JASO-1A
- Licensed and approved for use in: All GM vehicles (DEXRON®-VI, All previous DEXRON®); All Ford vehicles which specify Mercon® LV
FRAM – Full Synthetic Dexron VI Automatic Transmission Fluid: 1 Gallon (Part No.F426-1G)
from
$33.99
FRAM DEXRON®-VI FULL SYNTHETIC ATF represents the latest technology in full synthetic automatic transmission fluids. This product is designed for the newest generation of highly efficient transmissions now being installed in most vehicles, and is DEXRON®-VI licensed by GM and meets JASO 1A performance requirements. It is a fuel efficient choice for older models as well, such as those currently using DEXRON®-III. FRAM DEXRON®-VI FULL SYNTHETIC ATF is recommended for use in all GM DEXRON® applications and in transmissions applications calling for Toyota WS, Nissan Matic J and Matic S, Ford part numbers XT-10-QLV and XT-6-QSP, Honda Z-1 and DW 1, and Hyundai SP-VI. Check owner’s manual for specific recommendations.
Product Features:
See More
Product Features:
- Outstanding resistance to oxidative and thermal breakdown.
- Exceptional low temperature fluidity.
- Excellent anti-wear properties.
- Excellent gear shift quality throughout service life.
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
- TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL
Permatex – Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker (Part No.3K200329086PMX)
from
$11.81
3.5 oz. tube, carded – OEM specified. Permatex® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive.
Product Features:
See More
Product Features:
- Outstanding oil resistance and joint movement tolerance
- Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
- Temperature range -65F to 500F (-54°C to 260°C) intermittent
- Resists auto and shop fluids and vibration Suggested Applications: Valve covers, oil pans, transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings. DIRECTIONS :
- For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake and Parts Cleaner.
- Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 to 1/4 (2 to 6 mm) bead.
- Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes.
- Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
- Allow to dry for one hour then re-tighten 1/4 to 1/2 turn.
- Silicone will skin over in one hour and fully cure in 24 hours under normal conditions.
- Allow more time for cold or very dry conditions.
- Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. TECHNICAL DATA SHEET
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)
from
$12.79
Product Features:
See More
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
- Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
- Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon (Part No.773732)
from
$32.99
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.
Product Features:
See More
Product Features:
- HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
- SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart (Part No.889787)
from
$19.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.
Product Features:
See More
Product Features:
- FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
- MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
Valvoline – VAL SYNCHRO MTF (Part No.811095)
from
$14.49
VAL SYNCHRO MTF
Mobil 1 – 75W-90 Gear Lubricant LS: Synthetic, Corrosion Protection, Extends Gear Life, Multi-Purpose, 1 Quart (Part No.26101)
from
$19.99
Mobil 1 Synthetic Gear Lubricant LS 75W-90 is a supreme, multi-purpose automotive gear lubricant that helps to provide exceptional thermal stability and resistance to high temperature oxidation, extending gear life due to minimal deposits. Helps to deliver outstanding protection against low speed/high torque wear with the capability to handle severe driving conditions while delivering smooth efficient performance. Mobil 1 Synthetic Gear Lubricant LS provides exceptional shear stability, corrosion protection, and enhanced frictional properties. Compared to conventional hypoid gear lubricants, Mobil 1 LS 75W-90 performs exceptionally over a wide range of temperatures to reduce wear at start up. Mobil 1 gear lube helps to minimize leakage and reduce contamination, while providing a good resistance to foaming to maintain film strength for reliable lubrication. Meets or exceeds the requirements of the following industry specifications: API GL-5.
Product Features:
See More
Product Features:
- Mobil 1 LS synthetic automotive gear lubricant exceeds the highest level of performance requirements of modern passenger vehicles
- Helps to provide exceptional thermal stability and resistance to high temperature oxidation and extend gear life due to minimal deposits
- Delivers outstanding protection against low speed/high torque wear, handling severe driving conditions with smooth, efficient performance
- Compared to conventional hypoid gear lubricants, performs exceptionally over a wide range of temperatures to reduce wear at start up
- Provides exceptional shear stability, corrosion protection, and enhanced frictional properties
Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 5 Gallon (Part No.VV981)
from
$330.99
Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.
Product Features:
See More
Product Features:
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
- MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart (Part No.VV982)
from
$18.99
Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.
Product Features:
See More
Product Features:
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-3
- MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-4
Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (Part No.887344)
from
$69.99
Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.
Product Features:
See More
Product Features:
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
- MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Quart (Part No.VV831)
from
$12.49
Valvoline High Performance Gear Oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that helps protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions.
Product Features:
See More
Product Features:
- Formulated for reliable gear protection
- Protects against severe temperatures to help extend service life
- Formulated with extreme-pressure additives to minimize gear wear from shock loads
- Helps protect against gear wear from scuffing, scouring, corrosion and pitting
- Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified
- PLEASE NOTE: Valvoline recommends SynPower Full Synthetic Gear Oil for limited slip differentials
Popular 2015 Mazda CX-5 Fluids and Chemicals Categories
2015 Mazda CX-5 Fluids and Chemicals
You count on your 2015 Mazda CX-5 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fluids and Chemicals. With 27 Fluids and Chemicals ranging in price from $5.29 to $36.49, you’re sure to find everything you need for your 2015 Mazda CX-5.
Brands matter. If you want to shop a specific Fluids and Chemicals brand, we stock 10 different brands like Prestone, Valvoline, and Mobil Oil. 2015 Mazda CX-5 Fluids and Chemicals start as low as $5.29!
One of the best ways to find top quality OEM or aftermarket Fluids and Chemicals is by asking professionals. Short of that, you can shop with confidence thanks to our 9,032 extensive product reviews on 2015 Mazda CX-5 Fluids and Chemicals. Some of the top-rated Fluids and Chemicals products we carry are High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon with 4.8 stars and DOT 3 Brake Fluid: Synthetic, Prevents Corrosion, Safe For ABS, Disc, Drum Brakes, 50k miles, 32 oz with 4.8 stars.
Did we mention you can order your Fluids and Chemicals from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fluids and Chemicals inventory for your 2015 Mazda CX-5 below to get started!
Top-Rated Fluids and Chemicals Brands For Your 2015 Mazda CX-5
Trusted Fluids and Chemicals OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2015 Mazda CX-5 running right for years to come. In our inventory you’ll find brands like Prestone, Valvoline, Mobil Oil, and even more.
Popular Castrol Fluids and Chemicals
You’ll find popular Castrol brand products across Transmission Fluids. All are waiting to get your 2015 Mazda CX-5 back on the road. Some of the top-rated Castrol products in these categories are:
from
$12.29
(103)
Transmax ATF Full Synthetic Multi-Vehicle Automatic Transmission Fluid (1 Quart)
Automatic Transmission Fluids
Top-Rated Valvoline Fluids and Chemicals
If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Fluids and Chemicals for your 2015 Mazda CX-5, and some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Dual Clutch Transmission Fluids
from
$36.49
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon
Manual Transmission Fluids
from
$12.49
(235)
High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Quart
Transfer Case Fluids
FAQs for 2015 Mazda CX-5 Fluids and Chemicals
What are the most purchased Fluids and Chemicals for the 2015 Mazda CX-5?
Out of 27 Fluids and Chemicals for the 2015 Mazda CX-5, the most popular in our inventory are:
from
$14.99
This product is not rated
Antifreeze and Coolant: 50/50 Ready To Use, Universal, Protects Against Corrosion, 1 Gallon
Engine Coolant and Antifreeze
from
$17.99
This product is not rated
Antifreeze and Coolant: Concentrate, Universal, Protects Against Buildup And Rust, 1 Gallon
Engine Coolant and Antifreeze
from
$19.99
(448)
75W-90 Gear Lubricant LS: Synthetic, Corrosion Protection, Extends Gear Life, Multi-Purpose, 1 Quart
Transfer Case Fluids
What are the top-rated 2015 Mazda CX-5 Fluids and Chemicals?
Top-rated Fluids and Chemicals for your 2015 Mazda CX-5 based on customer reviews/ratings are:
from
$32.99
(235)
High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon
“Good quality”
from
$11.49
(201)
DOT 3 Brake Fluid: Synthetic, Prevents Corrosion, Safe For ABS, Disc, Drum Brakes, 50k miles, 32 oz
“Dot 3 is perfect for my Dodge Magnum. I flushed my entire system with it”
from
$23.29
(92)
Pentofrost A3 HOAT Phosphated Asian 50/50 Prediluted Antifreeze / Coolant – 1 Gallon
“Perfect fit for my 2012 Acura TL.”
