2015 Ford Expedition Ignition Coils and Boots
More 2015 Ford Expedition Ignition Coils and Boots
Find your specific 2015 Ford Expedition original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2015 Ford Expedition Ignition Coils and Boots
DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8095)
from
$101.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
DENSO – Coil On Plug Boots-8 (Part No.671-8164)
from
$63.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
DENSO – Coil On Plug Boots-6 (Part No.671-6291)
from
$191.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
DENSO – Coil On Plug Boots-8 (Part No.671-8110)
from
$62.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1011)
from
$76.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
PerTronix – Flame Thrower Coil On Plug: 1998-2009, Ford 2 Valve, 15% More Spark Energy, 1 ea, OE Replacement (Part No.30721)
from
$35.99
Flame-Thrower COP for 2 valve Ford engines feature an optimized coil design which increases the spark energy by 15% over the OEM coils. Molded epoxy prevents premature failure from moisture or winding fatigue. OEM replacement.
Product Features:
See More
Product Features:
- 30,000 Volts. Direct OEM replacement.
- Optimized coil design yields at least 15% more energy available for the spark than the most common OEM coils.
- Provides the spark energy throughout the RPM range and with no energy degradation up to 11,000 engine RPMs. Plated Copper terminals for added current conduction.
- Moisture resistant construction ensures long life in harsh environments. High-temp boot sustains seal and form. Epoxy molded for shock and vibration resistance.
DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-6300)
from
$98.99
As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
Accel – Pc Cop Coil 97-08 Ford 8/10-Cy (Part No.420001)
from
$35.49
Pc Cop Coil 97-08 Ford 8/10-Cy
Accel – Coil:Ford Ecoboost 3.5L V6: Single Yellow (Part No.140646)
from
$59.99
ACCEL has been offering high quality high output COP coils for Ford’s 2-valve, 3-valve and 5.0L Coyote applications for years, now EcoBoost owners can enjoy the benefits of ACCEL Supercoils as well! ACCEL SuperCoils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils. ACCEL late model Ford EcoBoost SuperCoils are not only available in traditional ACCEL yellow, but in blue and black as well!
Product Features:
See More
Product Features:
- High temperature vacuum applied epoxy resists shock and vibration
- Installation usually takes less than an hour
- Direct OEM replacement
- ODB II compatible ¿ will not trip an engine code
- ODB II compatible ┐ will not trip an engine code
- Choice of three different colors ¿ yellow, blue & black (application dependent)
- Choice of three different colors ┐ yellow, blue & black (application dependent)
- Offered in singles and multipacks
Edelbrock – COIL ON PLUG (Part No.22781)
from
$229.99
COIL ON PLUG
MSD Ignition – Coil; Ford 4.6/5.4L 3-Valve 04-08 Single (Part No.8243)
from
$70.99
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.
Product Features:
See More
Product Features:
- Fits 2005-2009 4.6L And 5.4L 3V
- Improved Spark Energy And Voltage Output
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-508)
from
$80.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Product Features:
See More
Product Features:
- These coils provide the exact spark timing that helps maximize the engine and emissions performance
- RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
- Engineered to help withstand temperature extremes
- Internal insulation displacement connection is helps make high-reliability internal connections
- Interior insulation helps ensure no internal arcing
- Right fit for each application; helps provide ease of installation and removal
- High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
- Housings engineered to help resist cracking in the most extreme conditions
- Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output
DENSO – Direct Ignition Coil (Part No.F3005748959ND)
from
$118.04
The Denso Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Meets or exceeds the OE specifications for durability and performance
- High profile insulation to prevent arching.
- Radio-Frequency Interference (RFI) Suppression
- Engineered to withstand extremes in temperatures
Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-521)
from
$73.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Product Features:
See More
Product Features:
- These coils provide the exact spark timing that helps maximize the engine and emissions performance
- RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
- Engineered to help withstand temperature extremes
- Internal insulation displacement connection is helps make high-reliability internal connections
- Interior insulation helps ensure no internal arcing
- Right fit for each application; helps provide ease of installation and removal
- High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
- Housings engineered to help resist cracking in the most extreme conditions
- Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output
WSO – Direct Ignition Coil – (Coil on Plug) (Part No.F3005387615WSO)
from
$26.67
Every WSO ignition coil is developed and designed for its specific application, and engineered for maximum performance. WORLD SOURCEONE ignition coils are designed to operate reliably and dependably under all operating conditions and engine rpm ranges, providing the highest engine performance, low exhaust emissions, and fuel economy objectives. WSO Direct Ignition Coils are designed to adapt the required energy output to match engine-operating conditions and deliver the optimum energy level needed to ignite a diluted stratified charge.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Superior, reliable performance compared to competitive products
- Lower cost alternative to original equipment
- No additional time consuming steps needed for installation
- Factory original equipment connectors
- Improved coil efficiency reduces the need to generate excessive high voltage
- Designed to provide durability and performance
- Noise abatement technology to eliminate audible coil noise
- Lower primary inductance provides high-speed performance
- Maximum available voltage under all operating conditions
- TS 16949 Certification
Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-511)
from
$76.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Product Features:
See More
Product Features:
- These coils provide the exact spark timing that helps maximize the engine and emissions performance
- RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
- Engineered to help withstand temperature extremes
- Internal insulation displacement connection is helps make high-reliability internal connections
- Interior insulation helps ensure no internal arcing
- Right fit for each application; helps provide ease of installation and removal
- High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
- Housings engineered to help resist cracking in the most extreme conditions
- Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output
Dorman – Help – Spark Plug Boot (Part No.49818)
from
$24.49
Spark plug coil boot deteriorated or damaged? This replacement boot matches the fit and function of the original part on specified years, make and models. This boot is made from quality materials to resist damage from heat and oil saturation.
Product Features:
See More
Product Features:
- Ideal replacement – this spark plug coil boot directly replaces the boot on specified vehicle years, makes and models.
- Durable construction – this spark plug coil boot is made from a tough rubber material that is resistant to damage from exposure to heat and oil saturation
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-002FMP)
from
$48.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Dorman – Help – Spark Plug Boot With Coil Wire Kit (Part No.49812)
from
$6.99
Spark plug coil boot deteriorated or damaged? This replacement boot matches the fit and function of the original part on specified years, make and models. This boot is made from quality materials to resist damage from heat and oil saturation.
Product Features:
See More
Product Features:
- Ideal replacement – this spark plug coil boot directly replaces the boot on specified vehicle years, makes and models.
- Durable construction – this spark plug coil boot is made from a tough rubber material that is resistant to damage from exposure to heat and oil saturation
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
ACDelco – Professional Direct Ignition Coil Boot (Part No.F3006612478ACD)
from
$10.02
Designed to be an ideal replacement for your vehicle’s worn equipment, ACDelco Professional, premium aftermarket Auto Wire and Auto Cable products are built to meet nearly every application and budget. ACDelco meet or exceed most original manufacturers’ specifications. Built to exacting specifications, and extensively tested, ACDelco Auto Wires and Auto Cables includes our Original Equipment line for GM vehicles and a select offering of premium aftermarket Professional products for GM and non-GM vehicles. ACDelco Professional, premium aftermarket Direct Ignition Coil-on-Plug Boots seal snugly against the spark plug’s insulator, keeping moisture and contaminates out and promoting longer spark plug life. They are thoroughly engineered to meet or exceed your expectations for fit, form, and function. ACDelco Professional Direct Ignition Coil-on-Plug Boots provide the performance and dependability you expect from ACDelco.
Product Features:
See More
Product Features:
- Weather tight boot seal for protection against moisture intrusion
- High temperature resistant silicone for protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the spark plug
- Premium, high-quality aftermarket spark plug boot Signs that you might need to replace your direct ignition coil-on-plug boot are:
- Engine will not start or run
- Reduced Power
- Excessive tailpipe emissions
- Check Engine Light is on
- Engine misfire
- Reduced fuel economy
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7006)
from
$8.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
NGK – Coil on Plug Boot (Part No.58901)
from
$6.79
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
Autopart International Inc – Direct Ign. Coil Boo (Part No.F30061967136API)
from
$10.84
Direct Ign. Coil Boo
JBA Performance – W06779 Ignition Wires 97-01 F-150 4.6L Blue (Part No.W06779)
from
$144.99
JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.
Product Features:
See More
Product Features:
- JBA Performance Exhaust W06779 Ignition Wires 97-01 F-150 4.6L Blue
- Extra thick diameters for improved under hood appearance
Motorcraft – Direct Ignition Coil Boot (Part No.F3006412382MTR)
from
$11.56
The Motorcraft Direct Ignition Coil Boot is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- OES replacement part for your vehicle’s original factory component
- Offering the quality, reliability, and durability of OES
- Manufactured to OES specification for fit, form, and function
Dorman – Help – Spark Plug Boot Replacement (Part No.49814)
from
$11.29
Spark plug coil boot deteriorated or damaged? This replacement boot matches the fit and function of the original part on specified years, make and models. This boot is made from quality materials to resist damage from heat and oil saturation.
Product Features:
See More
Product Features:
- Ideal replacement – this spark plug coil boot directly replaces the boot on specified vehicle years, makes and models.
- Durable construction – this spark plug coil boot is made from a tough rubber material that is resistant to damage from exposure to heat and oil saturation
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
DENSO – Coil On Plug Boots-8 (Part No.671-8172)
from
$97.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7087)
from
$11.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Popular 2015 Ford Expedition Ignition Coils and Boots Categories
2015 Ford Expedition Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 2015 Ford Expedition. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 11 different Ignition Coils and Boots in our inventory ranging from $24.49 to $336.99. That means you can find the exact parts or products you need to keep that 2015 Ford Expedition running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 2015 Ford Expedition. Motorcraft, Carquest Premium, and NGK are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 2015 Ford Expedition, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 2015 Ford Expedition rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 2015 Ford Expedition Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2015 Ford Expedition demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Expedition the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
Popular Motorcraft Ignition Coils and Boots
We carry Motorcraft parts in our stock across Ignition Coils categories, plus more. For a 2015 Ford Expedition, our most popular Motorcraft Ignition Coils and Boots include:
FAQs for 2015 Ford Expedition Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 2015 Ford Expedition?
Out of 11 Ignition Coils and Boots for the 2015 Ford Expedition, the most popular in our inventory are:
from
$102.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
from
$76.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
from
$98.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
