2014 Ford Police Interceptor Utility Cooling and Climate Controls

Essential 2014 Ford Police Interceptor Utility Cooling and Climate Controls

Motorcraft – A/C Compressor w/ Clutch, New (Part No.R1000679907MTR)

A/C Compressor w/ Clutch, New

from

$685.86
Motorcraft manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:
  • New compressors are the same components that were installed in the vehicle when it rolled off the assembly line
  • Loaded compressors include:
  • Clutch pulley and coil for easy ordering (most assemblies are pre-charged with PAG refrigerant oil)
  • Pre-shimmed clutch/pulley assemblies to provide direct bolt-in installation
  • Forged-Aluminum Pistons – For maximum life in low-lubrication, high-temperature conditions
  • Tin-Coated Swashplates – For added strength and durability
  • Rubber-Dampened Clutch – To minimize clutch noise during engagement
  • Pre-shimmed Clutch Assembly – To help make installations easier on loaded compressors
  • Dual Center-Seam Seals – For additional leak protection
See More

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTC1119)

HVAC Blower Motor Resistor Connector

from

$66.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1032)

HVAC Blower Motor Resistor

from

$79.99
Blower motor resistor fail? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment.

Product Features:
  • Restores Functionality – Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Motorcraft – Thermostat O-Ring (Part No.G4030195862MTR)

Thermostat O-Ring

from

$3.89
Thermostat O-Ring

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56936)

A/C Suction Line Hose Assembly

from

$59.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Motorcraft – HVAC DFRST MD DR ACT (Part No.YH-1769)

HVAC DFRST MD DR ACT

from

$52.99
HVAC DFRST MD DR ACT

KAI – Coolant Reservoir (Part No.FO3014136)

Coolant Reservoir

from

$84.99
New Platinum Pro Coolant Recovery Tank, With Cap

Product Features:
  • With Cap, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Motorcraft – Air Flap Actuator (Part No.R2046680733MTR)

Air Flap Actuator

from

$46.46
Air Flap Actuator

Carquest Premium – AC Pressure Sensor (Part No.ACA2003)

AC Pressure Sensor

from

$39.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Carquest Premium – Radiator (Part No.813559)

Radiator

from

$248.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

KAI – A/C Condenser (Part No.CND4298)

A/C Condenser

from

$169.99
New Platinum Pro A/C Condenser, With Transmission Cooler, 3.5 Liter Turbo V6, Includes Police Models

Product Features:
  • With Transmission Cooler, 3.5 Liter Turbo V6, Includes Police Models, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Thermostat Assembly: Includes Housing and Thermostat Assembly, 180 Degrees (Part No.902-683)

Thermostat Assembly: Includes Housing and Thermostat Assembly, 180 Degrees

from

$147.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

Dorman – Coolant Housing/Water Outlet: With Housing (Part No.902-1078)

Coolant Housing/Water Outlet: With Housing

from

$42.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Dorman – Help – Air Conditioning Service Port Caps (Part No.54374)

Air Conditioning Service Port Caps

from

$7.99
This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54208)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$14.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Motorcraft – Water Outlet Gasket (Part No.G3045348798MTR)

Water Outlet Gasket

from

$17.60
Water Outlet Gasket

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Thermostatic Fan Control - Preset

from

$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Preset thermostatic fan control
  • 185°F preset
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35934)

Engine Coolant Thermostat Housing Gasket

from

$9.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA1532)

ABS Wheel Speed Sensor

from

$38.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Carquest Premium – Heater Core: Without Tubes (Part No.910558)

Heater Core: Without Tubes

from

$148.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Motorcraft – A/C Hose (Part No.R10201351318MTR)

A/C Hose

from

$122.11
A/C Hose

Carquest Premium – A/C Filter Drier w/ Hose (Part No.T83272)

A/C Filter Drier w/ Hose

from

$64.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Dorman – Active Grille Shutter With Motor (Part No.601-322)

Active Grille Shutter With Motor

from

$548.99
This radiator shutter assembly matches the fit and function of the original equipment shutter to restore function to the vehicle’s active grille shutter system. This assembly features a factory-style connector for a plug-and-play installation.

Product Features:
  • Ideal replacement – this active grille shutter and motor assembly precisely matches the original equipment assembly on specific makes and models
  • Plug & play installation – this grille shutter assembly is made with a factory-style electrical connector for a trouble-free installation
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Felpro – THERMOSTAT GASKET (Part No.36111)

THERMOSTAT GASKET

from

$5.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714741)

A/C Condenser and Receiver Drier Assembly

from

$185.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • This Carquest condenser has an integrated oil cooler. This combines the cooling features of two separate systems (oil and refrigerant) into one heat exchanger by brazing tubes of different sizes into one part. This matches the OEM part for this applicat
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

2014 Ford Police Interceptor Utility Cooling and Climate Controls

You count on your 2014 Ford Police Interceptor Utility to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 80 Cooling and Climate Controls ranging in price from $3.89 to $685.86, you’re sure to find everything you need for your 2014 Ford Police Interceptor Utility.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 10 different brands like Permatex, Felpro, and Carquest Premium. 2014 Ford Police Interceptor Utility Cooling and Climate Controls start as low as $3.89!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 1,449 extensive product reviews on 2014 Ford Police Interceptor Utility Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Electric Fan – 12" Diameter with 3.5 stars and Adjustable Thermostatic Fan Control with 4.8 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2014 Ford Police Interceptor Utility below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2014 Ford Police Interceptor Utility

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2014 Ford Police Interceptor Utility running right for years to come. In our inventory you’ll find brands like Permatex, Felpro, Carquest Premium, and even more.

Popular Permatex Cooling and Climate Controls

You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 2014 Ford Police Interceptor Utility back on the road. Some of the top-rated Permatex products in these categories are:
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets

Top-Rated Cooling and Climate Controls


If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 2014 Ford Police Interceptor Utility, and some of our most reviewed parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2014 Ford Police Interceptor Utility Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2014 Ford Police Interceptor Utility?

Out of 80 Cooling and Climate Controls for the 2014 Ford Police Interceptor Utility, the most popular in our inventory are:
Multi-Purpose O-Ring
from $9.99
(110)
Multi-Purpose O-Ring
Engine Coolant Pipe O-Rings
Standard Thermostat: 180 Degrees
from $10.99
(31)
Standard Thermostat: 180 Degrees
Thermostats
HVAC Blend Door Actuator: 1 Piece
from $26.99
(14)
HVAC Blend Door Actuator: 1 Piece
Air Blend Door Actuators

What are the top-rated 2014 Ford Police Interceptor Utility Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 2014 Ford Police Interceptor Utility based on customer reviews/ratings are:
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
“good”
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
“Advance kicks butt”
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
“If you read the instructions it’s pretty self explanatory.”