2014 Ford Fiesta Cooling and Climate Controls

Name: Engine Water Pump: New, Gasket/Seals Included
Brand: Carquest Premium
SKU: T2332
Price: 87.99 USD
Rating: 1.0 (1 reviews)

Below you will find various in-demand Ford Cooling and Climate Controls, components and accessories for your 2014 Fiesta. Advance Auto Parts has popular Fiesta parts like Blend Doors, Blower Motor and Related Products, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Fiesta model years including 1980, 2011, 2012, 2013, 2015, 2016, 2017, 2018, 2019 and more. Select a category of 2014 Ford Fiesta Cooling and Climate Controls below and start saving instantly.

Popular 2014 Ford Fiesta Cooling and Climate Controls Categories

Engine Coolant Bypass Valves

Water Pump Housing Gaskets

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

AC Compressor Without Clutch

Thermostats

Radiator Fan Motors

Thermostat and Water Outlet Assemblies

Air Blend Door Actuators

Coolant Reservoirs

Coolant Temperature Sensors

AC Condenser and Receiver Drier Assemblies

Heater Cores

Cabin Air Temperature Sensors

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Water Outlets

Blower Motor Resistors

Radiator Supports

AC Condensers

Thermostat Housing Gaskets

Accumulator and Receiver Driers

Thermostat and Water Outlet Gaskets

AC O-Ring and Gasket Kits

Blower Motor Resistor Connectors

Engine Coolant Shut-Off Valves

Water Pump Gaskets

AC Clutch Cycle Switches

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Radiator Shutter Assemblies

Coolant Outlet Flanges

AC Compressor Cut-Off Switches

HVAC Blower Motor Connectors

AC Pressure Transducer Connectors

AC Compressor Clutch Connectors

AC Refrigerant Pressure Sensors

Heater Core Temperature Sensors

Coolant Bypass Seals

Essential Cooling and Climate Controls for 2014 Ford Fiestas

from

$87.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$494.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Endurance tested the equivalent of 50k miles
Includes specific electrical connector to eliminate splicing
Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, O-rings, or seals needed to repair your car

from

$39.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$100.15

The Motorcraft Thermostat is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.

Product Features:

Heavy-duty quality for long life
Stainless steel or brass bridge and spring frame, channel-constructed for strength and rigidity
Stainless steel, tapered-end pistons with flexible elastomeric boots
Streamlined venturi nozzle for maximum coolant flow
Brass cover and guide for heat motor piston
Mounting flange designed to properly fit and seat the thermostat in the housing
Stainless steel spring offers precise operating compression
Heat motor in high-strength brass housing
Rulon seal for heat motor piston
Specially formulated expansive wax compound

from

$109.77

When servicing air conditioning systems, choose Motorcraft climate-control components. They offer quality at a great value and are the only climate-control components recommended by Ford Motor Company.

Product Features:

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

from

$67.99

from

$87.99

New Platinum Pro A/C Condenser, 1.6 Liter L4 Engines Without Turbo, From Production Date 9/11/13

Product Features:

1.6 Liter L4 Engines Without Turbo, From Production Date 9/11/13, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$27.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$39.99

REGULATOR AND MTR

from

$99.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$20.99

from

$174.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$133.99

This aftermarket-exclusive valve maintains a continuous flow of coolant through the engine block. Symptoms of a failed coolant bypass valve include small leaks and internal electronic failure, resulting in illumination of the check engine light. This part restores optimal vehicle performance.

Product Features:

Direct replacement for original equipment.
Ideal replacement part for protecting your vehicle from costly engine damage.
The valve prevents slow engine warm-up, keeping the vehicle in proper working order
This part has undergone extensive vehicle try-on and durability testing to ensure strength, fitment and longevity

from

$21.99

Edelbrock thermostats are designed to ensure consistent cooling in high-performance applications. Feature a brass and copper valve assembly with a stainless steel body for durability. This 160 Deg F thermostat is a bolt-on OEM style replacement that measu

Product Features:

54mm Diameter
Rated For 160 Degrees
High Flow Type
OE Style
Made in The USA

from

$14.29

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$38.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$40.39

Thermostat Housing

from

$271.99

Carquest Standard Remanufactured Compressors are manufactured to meet original equipment specifications. All components are either remanufactured to strict standards or are replaced with new components to ensure performance and durability. All compressors are 100% end of line tested.

Product Features:

O-Rings and gaskets necessary for installation are included.
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$112.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$60.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compresso

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$20.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$165.99

New CAPA Certified Premium Replacement Radiator Support, Bolt-In, Fits Hatchback And Sedan, Matte-Black, 1.6 Liter Engine, Made Of Glass Fiber Reinforced Pp Plastic

Product Features:

Bolt-In, Fits Hatchback And Sedan, Matte-Black, 1.6 Liter Engine, Made Of Glass Fiber Reinforced Pp Plastic, Made Of Polypropelene & Glass fiber
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$28.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$94.94

Heater Valve

from

$55.99

This replacement engine coolant water outlet is engineered to match the fit and durability of the stock engine coolant water outlet on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant water outlet directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement water outlets

Upgrade your 2014 Ford Fiesta with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2014 Ford Fiesta, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Fiesta functioning at its best. At Advance Auto Parts, we offer a wide selection of 97 Cooling and Climate Controls for the 2014 Ford Fiesta, designed to meet your needs without breaking the bank. From Blend Door replacements to Blower Motor and Related Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2014 Ford Fiesta at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $6.99 to $790.37, with an average price of $77.86. Our 97 Cooling and Climate Controls in stock come from 16 trusted brands, so you’re sure to find the right part for your 2014 Ford Fiesta without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2014 Ford Fiesta, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Imperial, Dorman, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Imperial and Dorman also bring quality to the table, with Cooling and Climate Controls available starting at $14.29, and at an average 4 stars rating. With 2,362 customer reviews and counting, our 2014 Ford Fiesta Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2014 Ford Fiesta is always ready to roll. We’re committed to providing you with everything you need to keep your Fiesta in top shape, all in one place. Start shopping confidently below for your 2014 Ford Fiesta!

Best-Selling Blend Doors for 2014 Ford Fiestas

Enhance the driving experience in your Ford with 3 quality Blend Door components, starting at $29.99.

show more show less

from

$29.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$41.49

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$79.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

Most Popular 2014 Ford Fiesta Blower Motor and Related Products

Customize your Ford with 7 Blower Motor and Related Products products like Blower Motors, Blower Motor Resistors, and Blower Motor Resistor Connectors, all priced under $169.99.

show more show less

from

$66.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$163.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$40.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$100.87

Blower Motor

from

$39.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$169.99

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$67.99

Top Picks for 2014 Ford Fiesta Heating Parts

Upgrade Ford Fiestas with top-quality Heating Parts parts, including 2 OEM and aftermarket selections for your 2014 model.

show more show less

from

$94.94

Heater Valve

from

$99.99

Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Designed to keep your A/C system in top shape and built to provide long-lasting service
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

In-Demand Air Conditioning Parts for 2014 Ford Fiestas

Select from 24 premium Air Conditioning Parts parts for your 2014 Ford Fiesta, with prices ranging from $15.79 to $790.37.

show more show less

from

$15.79

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$20.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$109.77

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

from

$46.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications

from

$40.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$174.99

New Platinum Pro A/C Condenser, Turbocharged 1.6 Liter L4 Engine

Product Features:

Turbocharged 1.6 Liter L4 Engine, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$92.99

New Platinum Pro A/C Condenser, 1.6 Liter L4 Non-Turbo Engines

Product Features:

1.6 Liter L4 Non-Turbo Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$39.99

Carquest A/C Accessories provide a comprehensive offering of premium quality fittings and tools to service all aspects of an a/c service from the most simple fitting replacement to complex diagnostics required for late model applications.

from

$27.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$38.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$790.37

A/C Compressor

from

$494.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Endurance tested the equivalent of 50k miles
Includes specific electrical connector to eliminate splicing
Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, O-rings, or seals needed to repair your car

from

$263.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$232.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$149.99

New Platinum Pro A/C Condenser, 1.0 Liter I3 Engine

Product Features:

1.0 Liter I3 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$87.99

New Platinum Pro A/C Condenser, 1.6 Liter L4 Engines Without Turbo, From Production Date 9/11/13

Product Features:

1.6 Liter L4 Engines Without Turbo, From Production Date 9/11/13, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$69.99

Air conditioning stopped working? It could be as simple as the pressure switch. This replacement A/C transducer switch is the fix for corroded terminals or a broken connector on the original switch. A direct replacement to restore air conditioning.

Product Features:

Direct replacement – this A/C transducer switch is an exact replacement for the original switch
Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
Easy installation – no special tools required
Quality tested – switch has been tested to ensure proper fit and function

from

$62.99

from

$46.99

A/C SYSTEM SEAL

from

$39.99

REGULATOR AND MTR

from

$39.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$37.99

New Standard Replacement A/C Receiver Drier, L4 Engine

Product Features:

L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$30.96

A/C Receiver Drier

from

$24.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

Most Sold 2014 Ford Fiesta Engine Cooling Parts

Explore our best-selling Ford parts for the 2014 Fiesta among 59 OEM and aftermarket options starting from $6.99.

show more show less

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$134.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$64.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$79.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$67.99

Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
10″ Diameter
650 CFM
Use as a pusher or puller fan

from

$19.79

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$87.99

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$47.99

Direct replacement for original equipment.
Ideal replacement part for protecting your vehicle from costly engine damage.
The valve prevents slow engine warm-up, keeping the vehicle in proper working order
This part has undergone extensive vehicle try-on and durability testing to ensure strength, fitment and longevity

from

$28.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$28.99

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$25.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$90.52

Premium-Quality Coolant Outlet Flange for Durable and Efficient Engine Operation

from

$55.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$174.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$55.99

Ideal replacement – this engine coolant water outlet directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement water outlets

from

$35.25

The Motorcraft Thermostat is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.

Product Features:

Heavy-duty quality for long life
Stainless steel or brass bridge and spring frame, channel-constructed for strength and rigidity
Stainless steel, tapered-end pistons with flexible elastomeric boots
Streamlined venturi nozzle for maximum coolant flow
Brass cover and guide for heat motor piston
Mounting flange designed to properly fit and seat the thermostat in the housing
Stainless steel spring offers precise operating compression
Heat motor in high-strength brass housing
Rulon seal for heat motor piston
Specially formulated expansive wax compound

from

$100.15

The Motorcraft Thermostat is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.

Product Features:

Heavy-duty quality for long life
Stainless steel or brass bridge and spring frame, channel-constructed for strength and rigidity
Stainless steel, tapered-end pistons with flexible elastomeric boots
Streamlined venturi nozzle for maximum coolant flow
Brass cover and guide for heat motor piston
Mounting flange designed to properly fit and seat the thermostat in the housing
Stainless steel spring offers precise operating compression
Heat motor in high-strength brass housing
Rulon seal for heat motor piston
Specially formulated expansive wax compound

from

$55.99

New Platinum Pro Coolant Recovery Tank, With Cap

Product Features:

With Cap, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$7.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function

from

$165.99

New CAPA Certified Premium Replacement Radiator Support, Bolt-In, Fits Hatchback And Sedan, Matte-Black, 1.6 Liter Engine, Made Of Glass Fiber Reinforced Pp Plastic

Product Features:

Bolt-In, Fits Hatchback And Sedan, Matte-Black, 1.6 Liter Engine, Made Of Glass Fiber Reinforced Pp Plastic, Made Of Polypropelene & Glass fiber
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$141.99

New Economy Replacement Radiator Support, Bolt-In, Fits Hatchback And Sedan, Matte-Black, 1.6 Liter Engine, Made Of Glass Fiber Reinforced Pp Plastic

Product Features:

Bolt-In, Fits Hatchback And Sedan, Matte-Black, 1.6 Liter Engine, Made Of Glass Fiber Reinforced Pp Plastic, Made Of Polypropelene & Glass fiber
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$133.99

Direct replacement for original equipment.
Ideal replacement part for protecting your vehicle from costly engine damage.
The valve prevents slow engine warm-up, keeping the vehicle in proper working order
This part has undergone extensive vehicle try-on and durability testing to ensure strength, fitment and longevity

from

$96.99

New Platinum Pro Radiator, 1.6 Liter L4 Engine Without Turbo

Product Features:

1.6 Liter L4 Engine Without Turbo, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$55.49

Dorman’s Engine Coolant Recovery Tank is designed for enduring use. It resists the expansion and cracking that extreme temperature fluctuations can cause. Plus, the durable plastic construction prevents coolant fluid loss.

Product Features:

Comes with reservoir cap
Level sensor included (where applicable)
Direct replacement for a proper fit every time
Quality tested to ensure trouble-free installation and performance

from

$14.29

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$7.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$126.73

Motorcraft gas and diesel engine water pumps contain a precision bearing to help deliver a long and efficient performance. Additionally, stamped or cast impellers meet OE pumping requirements.

Product Features:

Seal designs use sintered metal or ceramic seats
Strong cast-iron or aluminum die-cast housings
Bearing housing meets OE load requirements
Precision-ground bearings
Hubs located for proper belt alignment
Includes installation gasket

from

$26.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function

from

$8.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$18.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$219.56

Without Controller Save time, money and labor with Dorman’s Engine Cooling Fan Assembly. It comes ready to install with the motor, shroud, and blade. Plus, the high fiberglass content offers extra strength and rigidity while improving thermal stability.

Product Features:

Optimal air flow prevents vehicle from overheating
Plug and Play jumper harnesses included (where applicable)
Direct replacement for a proper fit every time
All motors are tested prior to final production of radiator fan assembly

from

$656.99

This radiator shutter assembly matches the fit and function of the original equipment shutter to restore function to the vehicle’s active grille shutter system. This assembly features a factory-style connector for a plug-and-play installation..

Product Features:

Ideal replacement – this active grille shutter and motor assembly precisely matches the original equipment assembly on specific makes and models.
Plug & play installation – this grille shutter assembly is made with a factory-style electrical connector for a trouble-free installation
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$216.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$202.04

Radiator

from

$109.99

New Platinum Pro Radiator Fan Assembly, 1.6 Liter L4 Engine, Excludes Turbo, With Air Conditioning

Product Features:

1.6 Liter L4 Engine, Excludes Turbo, With Air Conditioning
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$94.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$90.49

Water Pump

from

$74.99

This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$73.35

Coolant Outlet Flang

from

$71.93

Thermostat Assembly

from

$46.51

Expansion Tank

from

$41.16

Motorcraft Water temperature sensors are designed for durability and electrical performance. Motorcraft digital Water temperature sensors are designed to work with Ford and Lincoln transmissions and engine control computers.

Product Features:

Sensors are tested according to Ford Motor Company noise, vibration and harshness (NVH) engineering standards
Recommended by Ford Motor Company

Top-Rated Cooling and Climate Controls Brands For Your 2014 Ford Fiesta

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2014 Ford Fiestas. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Imperial, and Dorman, and more. Cooling and Climate Controls from these brands that fit a 2014 Fiesta start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2014 Ford Fiesta Cooling and Climate Controls

When it comes to maintaining or upgrading your 2014 Ford Fiesta, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2014 Ford Fiesta. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Popular Imperial 2014 Ford Fiesta Cooling and Climate Controls

Imperial auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2014 Ford Fiesta owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 2014 Fiesta, Advance Auto Parts carries a full inventory of 6 Imperial Cooling and Climate Controls. Plus you will be keeping your Ford in peak condition while saving money because prices on these Imperial Cooling and Climate Controls range from $22.99 to $94.99, plus, with more than 130 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$55.99

(33)

Adjustable Thermostatic Fan Control

“I used this fan control on my 2006 pt cruiser. It’s simple to install and works great. I’m going to get another one for my 1999 jeep Cherokee.”

from
$22.99

(35)

Adjustable Thermostatic Fan Control

“Advance kicks butt”

from
$94.99

(38)

Electric Fan – 12" Diameter

“good”

FAQs for 2014 Ford Fiesta Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2014 Ford Fiestas?

Out of 97 Cooling and Climate Controls that fit 2014 Ford Fiestas, the following parts are the top sellers:

Adjustable Thermostatic Fan Control (6016936) – $22.99
Electric Fan – 12" Diameter (6016901) – $94.99
Water Control Valve (11971204) – $47.99

What’s the price range for 2014 Ford Fiesta Cooling and Climate Controls?

Cooling and Climate Control prices for the 2014 Ford Fiesta start at $6.99 and go up to $790.37 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2014 Ford Fiesta?

The average price for Cooling and Climate Controls for the 2014 Ford Fiesta is $77.86. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Ford Fiesta model years?

Yes, we currently carry Cooling and Climate Controls for 11 model years of Ford Fiestas between 1978 and 2019. Cooling and Climate Controls are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, 2013, 2012, 2011, and 1980.

What are the cheapest Cooling and Climate Controls for my 2014 Ford Fiesta?

The cheapest 2014 Ford Fiesta Cooling and Climate Controls we carry in stock are:

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
Engine Water Pump Gasket (11469103) – $7.79
Engine Coolant Outlet Gasket (11646354) – $7.99
THERMOSTAT GASKET (11453799) – $8.99
Engine Coolant Outlet Gasket (12005670) – $10.29

What are the top-rated Cooling and Climate Controls that fit the 2014 Ford Fiesta?

Out of 2,362 reviews by customers, our 2014 Ford Fiesta Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2014 Ford Fiesta and their top-rated products:

Engine Cooling Parts
- Integrated Thermostat Housing: With Seal, 194 Degrees (11357669) – $79.99
- Adjustable Thermostatic Fan Control (6016936) – $22.99
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99

What types of Cooling and Climate Controls do you sell for my 2014 Ford Fiesta?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2014 Ford Fiesta:

Can I get help with 2014 Ford Fiesta Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Cooling and Climate Controls and more.

What is your return policy for Ford Fiesta Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Ford Fiesta Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2014 Ford Fiesta Cooling and Climate Controls

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2332)

Carquest Premium – New Compressor with Clutch, Halla HCC-VS16 (Part No.T178398)

Carquest Premium – Brake Light Switch Connector (Part No.PTC1134)

Motorcraft – Thermostat Assembly (Part No.G4002551689MTR)

Motorcraft – A/C Pressure Switch (Part No.R10541362210MTR)

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTA1336)

KAI – A/C Condenser (Part No.CND4919)

Carquest Premium – A/C Block Expansion Valve (Part No.T39444)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Motorcraft – REGULATOR AND MTR (Part No.WPT-439)

Carquest Premium – AC Pressure Sensor (Part No.ABA1012)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1438)

Carquest Premium – Radiator (Part No.813201)

Dorman – Water Control Valve (Part No.902-054)

Edelbrock – High Performance Thermostat (53mm) – 160 Deg (Part No.8603)

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54211)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83137)

Motorcraft – Thermostat Housing (Part No.G4010480247MTR)

Carquest Standard – A/C Remanufactured; w/ Clutch; w/ HS15 Compressor (Part No.DW97319)

Carquest – A/C Compressor Cut-Out Switch (Part No.CCS420)

Carquest Premium – AC Pressure Switch (Part No.ACA1349)

Carquest Premium – A/C Clutch Cycle Switch Connector (Part No.PTA1128)

KAI – Radiator Support (Part No.FO1225202PP)

NTK – Engine Coolant Temperature Sensor (Part No.EF0106)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Metrix – Heater Valve (Part No.R3020650497MTX)

Dorman – Engine Coolant Water Outlet (Part No.902-230)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-251)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-400)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-322)

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTC1119)

Carquest Premium – Blower Motor: With Wheel (Part No.76962)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1238)

TYC – Blower Motor (Part No.R2031680627TYC)

Carquest Premium – Brake Light Switch Connector (Part No.PTC1134)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1525)

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTA1336)

Metrix – Heater Valve (Part No.R3020650497MTX)

Carquest Premium – Heater Core (Part No.910497)

Carquest Premium – A/C Standard Temp Automatic Adjusting Orifice Tube (Part No.T38902)

Carquest Premium – A/C Clutch Cycle Switch Connector (Part No.PTA1128)

Motorcraft – A/C Pressure Switch (Part No.R10541362210MTR)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26822)

Carquest Premium – A/C Compressor Clutch Connector (Part No.PTA1369)

KAI – A/C Condenser (Part No.CND4437)

KAI – A/C Condenser (Part No.CND4321)

Carquest Premium – A/C System Mounted Pressure Transducer (Part No.T37340)

Carquest Premium – A/C Block Expansion Valve (Part No.T39444)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83137)

Motorcraft – A/C Compressor (Part No.R1000847011MTR)

Carquest Premium – New Compressor with Clutch, Halla HCC-VS16 (Part No.T178398)

Carquest Premium – A/C Condenser (Part No.714437)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714321)

KAI – A/C Condenser (Part No.CND4958)

KAI – A/C Condenser (Part No.CND4919)

Dorman – Air Conditioning Pressure Sensor (Part No.904-612)

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.CCA1041)

Carquest Premium – A/C SYSTEM SEAL (Part No.T26822)

Motorcraft – REGULATOR AND MTR (Part No.WPT-439)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2003)

KAI – A/C Receiver Drier (Part No.ARD010273)

Autopart International Inc – A/C Receiver Drier (Part No.R10403311346API)

Carquest Premium – A/C Block Expansion Valve (Part No.T39538)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.621-503)

Dorman – Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-381)

Motorad – Integrated Thermostat Housing: With Seal, 194 Degrees (Part No.736-194)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan – 10" Diameter (Part No.226110)

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10262)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2332)

Dorman – Water Control Valve (Part No.902-055)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1011)

NTK – Engine Coolant Temperature Sensor (Part No.EF0106)