Ford Fiesta Parts

Ford Fiesta Body Parts

from

$59.99

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$42.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$459.99

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new CAPA certified premium replacement grille, excludes st models, with chrome frame, for sedan and hatchback models. It is designed to replace your existing front grille. Check to be sure it fits your vehicle.

Product Features:

Excludes ST Models, With Chrome Frame, For Sedan And Hatchback Models, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: Limited
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$82.99

This door mirror drive motor is designed to match the fit and function of the original motor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door mirror drive motor is designed to match the fit and function of the original motor on specified applications
Ideal solution – this motor is a reliable replacement for an original part that has failed due to fatigue, water infiltration or collision damage
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$645.99

New Standard Replacement Hood Panel, Sedan And Hatchback Models

Product Features:

Sedan And Hatchback Models, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$65.99

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

Protects vehicle’s hood from bugs or rock chips
Low profile, aerodynamic design
Installs in less than 5 minutes, no tools required
Custom fit exactly to your vehicle
Leather grain vinyl

from

$59.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$44.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$12.49

Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:

Ideal replacement – this window crank handle matches the fit and function of the original equipment component
Durable construction – this window crank handle is made of durable material to withstand extended use
Easy to install – this window crank requires no special tools to install
Versatile design – this window crank handle is suitable for use in various locations in the vehicle

from

$8.99

This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$45.99

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$17.99

New Standard Replacement Passenger Side Front Bumper Cover Retainer, For Sedan And Hatchback

Product Features:

For Sedan And Hatchback, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$74.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$51.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Trunk Lid Release Switch provides convenient access to the trunk area with a simple push of a button, enhancing ease of loading and unloading cargo while improving user convenience. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$23.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$745.99

New CAPA Certified Premium Replacement Front Bumper Cover, For Hatchback And Sedan Models, Paint To Match

Product Features:

For Hatchback And Sedan Models, Paint To Match, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$40.99

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$37.49

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$19.99

New Standard Replacement Passenger Side Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$20.99

New Standard Replacement Passenger Side Hood Hinge

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$1.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$52.99

This trunk lid release switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this trunk lid release switch is made to match the fit and performance of the original switch on specific vehicle applications
Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$155.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Door Switch is a versatile component that can control various functions such as door locks, windows, or side mirrors. Whether used for a single function or multiple operations, it offers reliable control and enhances the driver’s convenience. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Ford Fiesta Transmission Parts

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$77.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 11-19;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2011-2019
Weight approx: 3 Lbs

from

$54.99

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
O-rings or seals are included (where applicable)
Magnet size and strength optimized for precise signal output.
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$22.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$50.99

No matter what the application, there is a unique Motorcraft and Ford Part designed, manufactured and comprehensively tested to perform to exacting Ford specifications and quality standards, including Key Life testing to the equivalent of 10-years / 150,000 miles for passenger cars and light trucks.

Product Features:

Backed by the Motorcraft Service Parts, unlimited mileage, limited labor cost and no commercial exceptions. Warranty is supported nationwide by Ford/Lincoln dealers and Ford Authorized Distributors.
The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.
Motorcraft kits are the only pigtails recommended by Ford Motor Company.
Each pigtail kit includes everything needed to make a complete repair; including: Wiring pigtail; Heat shrink tubing; Butt splices.
All Pigtail kits include OE connectors.
Motorcraft offers nearly 900 pigtail kits which meet strict Ford engineering specifications and are designed to repair factory harnesses with factory componentry.

from

$8.79

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$67.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 14-19;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2014-2019
Weight approx: 3 Lbs

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$53.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 11-19;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2011-2019
Weight approx: 2 Lbs

from

$41.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2011-2019
Weight approx: 1 Lbs

from

$40.99

Designed to meet or exceed OE specifications for fit, form and function
O-rings or seals are included (where applicable)
Magnet size and strength optimized for precise signal output.
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$18.99

Designed to meet or exceed OE specifications for fit, form and function
O-rings or seals are included (where applicable)
Magnet size and strength optimized for precise signal output.
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$236.99

The transmission gear position sensor reports the location of the gear selector to the transmission or powertrain control module. The sensor input is used for back-up light illumination, transmission function as well as engine operating characteristics based on the position chosen.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$809.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$51.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$13.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Ford Fiesta Clutch Systems

from

$321.99

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$174.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$64.99

Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$25.99

FLYWHEEL SHIM

from

$26.99

FLYWHEEL SHIM

from

$151.99

Flywheels Are Engineered & Manufactured To OE Specifications.

Product Features:

Manufactured From Premium Grade Materials For Superior-Quality Friction Surface & Excellent Heat-Absorption Capacity.

from

$157.99

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear.

Ford Fiesta Automotive Accessories

from

$109.99

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

Capacity: 10 cu ft
Dimensions: 36″ L x 30″ W x 16″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$129.99

Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$84.99

Circulation Tank Heater is Available in 850W, 1000W, 1500W, and 2000W, 120V and 240V. This heater is thermostatically controlled 135 degrees-175 degrees. Moderate mechanical ability is required for installation. Uses versatile strap type mounting.

Product Features:

Available for all size engines
Equipped with check valve
Fits most liquid cooled engines
Installations easier and simpler
New lower radiator hose connectors

from

$23.99

Kats Heater believes that quality is a basic requirement in the design, manufacture, and delivery of our products and services. Our quality policy is Total Customer Satisfaction in the delivery of products and services to consistently meet evolving customer expectations. We shall continuously pursue quality improvement programs that enable each employee to do his or her job right the first time and each time.

Product Features:

Engine heater replacement cord

from

$159.99

Lightweight & thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 200″ L x 60″ W x 51″ H.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H.
This indoor vehicle cover is made from a stretchable material conforms to you car
Extremely soft fleece lining to protect your car from scratches
This auto cover is suitable for indoor use or for garage kept vehicles
Available in black, silver & red colors

from

$159.99

Lightweight & thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust & air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 157″ L x 60″ W x 48″ H.

Product Features:

This car cover fits cars 157″ L x 60″ W x 48″ H.
This indoor vehicle cover is made from a stretchable material conforms to you car
Extremely soft fleece lining to protect your car from scratches
This auto cover is suitable for indoor use or for garage kept vehicles
Available in black, silver & red colors

from

$69.99

AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a Limited Lifetime Warranty.

Product Features:

Precision Engineered For A Custom Fit On Your Vehicle With Modern; Curved Design
Easy Installation With No-Drilling Or Special Hardware Required
Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
Made From Durable; Impact-Resistant Acrylic
Available In Dark Smoke And Chrome Finishes

from

$77.99

This Remote Key Combo is both a bladed key which starts your ignition and a clicker for your vehicle’s Keyless Entry System. The device is compatible with a variety of Ford models manufactured between 2012-2019 and features a clean three button layout: UNLOCK, LOCK, and PANIC. The blade itself is uncut and it will need to be cut by a locksmith or automotive professional.

Product Features:

Replacement Ford Remote Head Key Combo for FCC ID: X32-RHKFO
3 button functions: LOCK, UNLOCK, and PANIC
Freshly installed battery included

from

$14.99

Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
Reliable construction – keeps moisture and debris out of internal electronics for long service life
Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

from

$16.99

Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
Reliable construction – keeps moisture and debris out of internal electronics for long service life
Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

from

$119.99

The AVS Aeroskin Chrome Hood Protector provides a tough defense against road debris for your vehicle’s hood. Aeroskin’s flush mount design fits the hood contours perfectly providing the best leading edge hood protection today. Aeroskins come with a .

Product Features:

Custom-Molded With Precision Engineering To Ensure A Perfect Fit
Provides Sleek, Aerodynamic Hood Protection With Low-Profile, Flush-Mount Design
Cool, Contoured And Classy Styling Accent
Easy, No-Drill Installation — Installs Using 3M Automotive-Grade Adhesive
Car Wash Safe
Available In Dark Smoke, Chrome, Matte Black, OEM Paint Code Color-Match Finishes

from

$49.99

The AVS Aeroskin Hood Protector provides a tough defense against road debris for your vehicle’s hood. Aeroskin’s flush mount design fits the hood contours perfectly providing the best leading edge hood protection today. Aeroskins come with a Limited Lifetime Warranty.

Product Features:

Custom-Molded With Precision Engineering To Ensure A Perfect Fit
Provides Sleek; Aerodynamic Hood Protection With Low-Profile; Flush-Mount Design
Cool; Contoured And Classy Styling Accent
Easy; No-Drill Installation — Installs Using 3M Automotive-Grade Adhesive
Car Wash Safe
Available In Dark Smoke; Chrome; Matte Black; OEM Paint Code Color-Match Finishes

from

$14.99

New Standard Replacement Front License Plate Bracket, Except St Models

Product Features:

Excludes St Models, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$23.99

New Standard Replacement Front License Plate Bracket, Hatchback And Sedan Models

Product Features:

Hatchback And Sedan Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$143.99

KEYLESS ENTRY REMOTE

from

$19.99

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
Universal Fit
FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle. Proven to offer outstanding resistance to wear and tear
133dB @ 4″, 12V

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For A Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive
Backed By A Limited Lifetime Warranty

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For A Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Ford Fiesta Interior Products

from

$37.99

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations

from

$276.99

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
Semi-custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family
Machine Washable
Designed To Fit Bench Style Rear Seats

from

$276.99

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
Semi-custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family
Machine Washable
Designed To Fit Bench Style Rear Seats

from

$57.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$16.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$106.99

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$106.99

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$47.99

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$226.99

The Accelerator Pedal Position (APP) sensor provides a signal identifying the location of the accelerator pedal to the engine control module. As the vehicle operator requests various degrees of torque from the engine the signal from the sensor provides the engine computer the necessary information to implement the request. The sensor provides two positive slope signals that have an offset voltage range and increase at different rates, the two signals from the sensor provide the engine computer with two unique signal inputs ensuring safety should one signal fail.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$22.49

The Steering Wheel Radio Controls are a safety feature which allow duplicate radio operational control from the convenience of the steering wheel permitting the vehicle operator to keep their hands on the steering wheel and eyes in the vehicle operating direction.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$33.99

These universal horn accessories are ideal for applications requiring a horn where a horn was not originally provided or to replace a horn where the application no longer is available.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$92.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Combination Switch provides centralized control of multiple vehicle functions such as headlights, turn signals, and wipers, enhancing driver convenience and safety by allowing seamless operation from a single control point. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$16.99

Carquest Vehicle Solutions provides high-quality solutions for a wide range of applications. The Dimmer Switch enhances driver comfort and visibility by allowing easy customization of dashboard and interior light levels. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$19.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Dimmer Switch enhances driver comfort and visibility by allowing easy customization of dashboard and interior light levels. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$25.49

GM Genuine Parts Headlight Dimmer Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$11.99

ATP Speedometer Cable Core Kit provides a lower cost alternative to cable repair when the cable core has broken or kinked. Each kit includes 0.130″ diameter S.A.E./O.E.M. standard multi-coiled wire cable with squared end, universal metal tip and spacer washer. Cut cable end to desired length and attach tip using staking tool (included). The overall length of the cable core is 83″.

Product Features:

Easy to install
Will fit many custom applications
Low cost alternative

from

$4.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$9.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$3.99

This window crank handle knob is designed to match the fit of an original equipment knob on specified vehicles. It is engineered to help ensure proper window opening and closing functionality and replace a knob that is unsightly, missing, or damaged.

Product Features:

Direct replacement – this window crank handle knob is designed to match the fit, function and performance of an original equipment knob on specified vehicles
Ideal solution – engineered to help ensure proper window opening and closing functionality, seamlessly replace a knob that is missing or damaged, and restore the appearance of the vehicle interior
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Looking for the best Ford Fiesta aftermarket replacement parts? Replacing worn and broken parts on your Ford Fiesta? Check out our online catalog to find the best selection of aftermarket Ford Fiesta parts as well as real user reviews on Ford Fiesta replacement parts. Make an informed decision about every component you add to your Fiesta.

At Advance Auto, we’ve got you covered when it comes to getting your Ford Fiesta in tip top condition. We’ve got over 1,491 Ford Fiesta parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our Ford Fiesta parts catalog to compare OEM and aftermarket parts for your Ford Fiesta.

Whether you need Ford Fiesta body parts, interior components, or custom Ford Fiesta parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your Ford Interior Products same day? No problem, you can pick up Fiesta parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Ford Fiesta parts has never been easier.

Advance Auto customers frequently search for the following types of Ford Fiesta auto parts. Check out customer reviews and ratings, and compare prices on the following Ford Fiesta parts:

People also search Advance Auto for these popular years of the Ford Fiesta:

Ford Fiesta Parts

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)

Carquest Premium – Multi-Use Connector (Part No.PTC1134)

KAI – New CAPA Certified Premium Replacement Grille (Part No.FO1200552PP)

Dorman – Side Mirror Control Motor (Part No.924-400)

KAI – Hood Panel (Part No.FO1230285)

Covercraft – Custom Hood Protector, Vinyl, Black (Part No.45277-01)

Burco – Side View Replacement Mirror (Part No.3929)

Dorman – Help – Exterior Door Handle Front/Rear Right Rear Left Black, Cap, wo/Keyhole (Part No.81961)

Dorman – Help – Window Crank Handle Left/Right (Part No.83276)

Dorman – Help – Door Hinge Bushing Assortment – 4 Sizes (Part No.38374)

Burco – Side View Replacement Mirror (Part No.5428)

StrongArm – Liftgate Lift Support: 21.46" Ext Length, 8.25" Travel, 79 Lbs of Force, 1 Pk (Part No.C6791)

KAI – Bumper Cover Retainer (Part No.FO1043128)

Dorman – Window Regulator: Manual, 1 Pack (Part No.752-650)

Carquest Premium – Trunk Lid Release Switch (Part No.SBA2256)

Carquest Premium – Multi-Use Connector (Part No.PTA1829)

Dorman – GM Cowl Retainer (Part No.961-362D)

KAI – Bumper Cover (Part No.FO1000662PP)

Dorman – Interior Door Handle (Part No.97602)

Carquest Premium – Multi-Use Connector (Part No.PTA1527)

KAI – Fender Liner (Part No.FO1249153)

KAI – Hood Hinge (Part No.FO1236151)

Dorman – Hood Insulator Retainer -Ford (Part No.45503)

Dorman – Release Switch (Part No.901-209)

Carquest Premium – Door Window Switch (Part No.WSC2896)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Anchor – Transmission Mount: Left, 1 Piece (Part No.3259)

Carquest Premium – Automatic Transmission Speed Sensor (Part No.SNA1112)

Carquest Premium – Multi-Use Connector (Part No.PTA1471)

Motorcraft – Wiring Kit (Part No.WPT-1807)

National – Multi Purpose Seal (Part No.224020)

Anchor – Transmission Mount: Left, 1 Piece (Part No.3496)

National – Multi-Purpose Bearing (Part No.A-4)

FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.KT4)

Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.3193)

Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.3261)

Carquest Premium – Vehicle Speed Sensor (Part No.SBA3806)

Carquest Premium – Automatic Transmission Speed Sensor (Part No.SNA1077)

Carquest Premium – Automatic Transmission Gear Position Sensor (Part No.CSC1929)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

LuK – Original Equipment Quality Replacement Clutch Kit (Part No.07-233)

Carquest Premium – Multi-Use Connector (Part No.PTA1023)

National – Manual Transmission Shift Shaft Seal (Part No.710970)

LuK – Clutch Kit: 8 11/16" Disc Diameter, 13/16" Input Shaft Diameter, 17 Tooth Spline (Part No.07-232)

LuK – LuK Original Equipment Quality Replacement CLUTCH MASTER CYLINDER (Part No.LMC467)

LuK – Original Equipment Quality Replacement Clutch Slave Cylinder (Part No.LSC630)

ATP – FLYWHEEL SHIM (Part No.FS-5)

ATP – FLYWHEEL SHIM (Part No.FS-4)

LuK – OE Quality Flywheel (Part No.LFW494)

LuK – Original Equipment Quality Replacement Flywheel (Part No.LFW468)

Rightline Gear – Sport Jr. Car Top Carrier (Part No.100S50)

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Black (Part No.1014171)

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Black (Part No.1014111)

Kat’s – Circulation Tank Heater; Thermostatically Controlled (Part No.13080)

Kat’s – Engine Heater; Replacement Cord (Part No.28400)

Budge – Indoor Stretch Car Cover Black Size 3 Fits Cars up to 16 ft. 8 in. L Soft Inner Lining (Part No.BSC-3)

Budge – Indoor Stretch Car Cover Silver Size 1 Fits Cars up to 13 ft. 1 in. L Soft Inner Lining (Part No.GSC-1)

Auto Ventshade (AVS) – Ventvisor Window Visors: Outside Mount, Smoke, Front And Rear, 4 Pc (Part No.94547)

iKeyless – Ford Keyless Entry Remote and Key Combo – 3 Button (Part No.SKFORKEY031COMB)

Dorman – Help – Keyless Remote Case Repair (Part No.95634)

Dorman – Help – Keyless Remote Case Repair (Part No.92065)

Auto Ventshade (AVS) – Aeroskin, Hood Protector, Chrome, Low Profile, 1 Pc (Part No.620047)

Auto Ventshade (AVS) – Aeroskin½, Hood Protector, Smoke, Low Profile, 1 Pice (Part No.320042)

KAI – License Plate Bracket (Part No.FO1068152)

KAI – License Plate Bracket (Part No.FO1068132)

Dorman – KEYLESS ENTRY REMOTE (Part No.99293ST)

Fiamm – Freeway Blaster Low Note Horn: Universal Fit, Hardware Included (Part No.7211223)

Auto Ventshade (AVS) – Windflector – Pop-Out, Window, Fits Up To 32.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.78060)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 41.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77005)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 35.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77003)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 33.0" Wide Sunroofs, Smoke, Outside Mount, 1 Pice (Part No.77001)

Auto Ventshade (AVS) – Windflector – Pop-Out, Window, Fits Up To 36.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.78062)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 38.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77004)

Dorman – Fuel Ignition Harness (Part No.645-215)

WeatherTech – Highback Rear Bench Seat – 56"W X 19.5"D X 22.5"H, Black, Polycotton (Part No.DE2011CH)

WeatherTech – High Back Rear Bench Seat, Polycotton Twill, Tan, Single (Part No.DE2011TN)

Carquest Premium – Multi-Use Connector (Part No.PTC2977)

Carquest – Headlight Dimmer Switch Connector (Part No.PT767)

Dashmat – Velourmat Dashboard Cover Velour Material – Cocoa (Part No.70064-00-26)