2014 Ford Fiesta Body Parts

Essential 2014 Ford Fiesta Body Parts

Burco – Side View Replacement Mirror (Part No.4362)

Side View Replacement Mirror

from

$34.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Dorman – Help – Exterior Door Handle Front Right, Rear Left and Right (Part No.91113)

Exterior Door Handle Front Right, Rear Left and Right

from

$53.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Door Mirror Glass (Part No.56179)

Door Mirror Glass

from

$53.99
Cracked mirror glass? This door mirror glass is precision-engineered to match the original door mirror glass of specific vehicle years, makes and models for a simple and permanent replacement job.

Product Features:
  • Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles
  • Seamless design – precisely cut to match the shape and look of the factory glass
  • Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
  • Easy installation – follow simple step-by-step procedure to swap out existing glass
See More

Dorman – Integrated Door Latch Actuator (Part No.937-721)

Integrated Door Latch Actuator

from

$143.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Carquest Premium – Liftgate Release Switch (Part No.SBA2256)

Liftgate Release Switch

from

$51.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – New CAPA Certified Premium Replacement Rear Bumper Impact Bar (Part No.FO1106354DSC)

New CAPA Certified Premium Replacement Rear Bumper Impact Bar

from

$339.99
As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, We Are Supplying a New CAPA Certified Premium Replacement Rear Bumper Impact Bar, For Hatchback Models. It is Designed to Replace Your Existing Bumper Impact Bar. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • For Hatchback Models, Made Of Ultra High Stength Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Side Mirror Control Motor (Part No.924-400)

Side Mirror Control Motor

from

$73.99
This door mirror drive motor is designed to match the fit and function of the original motor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this door mirror drive motor is designed to match the fit and function of the original motor on specified applications
  • Ideal solution – this motor is a reliable replacement for an original part that has failed due to fatigue, water infiltration or collision damage
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
See More

Le Bra – Front End Cover, Vinyl, Black (Part No.551413-01)

Front End Cover, Vinyl, Black

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

Covercraft – Custom Hood Protector, Vinyl, Black (Part No.45277-01)

Custom Hood Protector, Vinyl, Black

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More

Carquest Premium – Liftgate Release Switch (Part No.SBA4564)

Liftgate Release Switch

from

$28.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Fender Liner (Part No.FO1248153)

Fender Liner

from

$19.99
New Standard Replacement Driver Side Fender Liner

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.FO1249153)

Fender Liner

from

$19.99
New Standard Replacement Passenger Side Fender Liner

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

StrongArm – Liftgate Lift Support: 21.46" Ext Length, 8.25" Travel, 79 Lbs of Force, 1 Pk (Part No.C6791)

Liftgate Lift Support: 21.46" Ext Length, 8.25" Travel, 79 Lbs of Force, 1 Pk

from

$43.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

Atlas Lift – Lift Support (Part No.LS10841)

Lift Support

from

$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

KAI – Bumper Cover Grille (Part No.FO1039144)

Bumper Cover Grille

from

$29.99
New Standard Replacement Front Passenger Side Bumper Cover Grille, For Use Without Lamp, For S Model And Se Without Appearance Package

Product Features:
  • For Use Without Lamp, For S Model And Se Without Appearance Package, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – New CAPA Certified Standard Replacement Front Bumper Cover Grille, Fits S/SE Models, Matte-Dark Gray (Part No.FO1036157C)

New CAPA Certified Standard Replacement Front Bumper Cover Grille, Fits S/SE Models, Matte-Dark Gray

from

$189.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Front Bumper Cover Grille, Fits S/SE Models, Matte-Dark Gray. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Fits S/SE Models, Matte-Dark Gray, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Valance Panel (Part No.FO1195138C)

Valance Panel

from

$184.99
New CAPA Certified Standard Replacement Rear Lower Valance Panel, For Hatchback Models, Except St Models, Matte Dark Gray

Product Features:
  • For Hatchback Models, Except ST Models, Matte Dark Gray, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Valance Panel (Part No.FO1195137C)

Valance Panel

from

$315.99
New CAPA Certified Standard Replacement Rear Lower Valance Panel, For Sedan Models, Matte Dark Gray Finish

Product Features:
  • For Sedan Models, Matte Dark Gray Finish, Made Of Thermoplastic Polyolefin
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bumper Cover (Part No.FO1000693)

Bumper Cover

from

$804.99
New Standard Replacement Front Bumper Cover, For Sedan And Hatchback Models, Except St, For Use With Chrome Trim, With Integral Spoiler, Prime

Product Features:
  • For Sedan And Hatchback Models, Except ST, For Chrome Trim, With Integral Spoiler, Paint To Match, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bumper Cover (Part No.FO1000692)

Bumper Cover

from

$849.99
New Standard Replacement Front Bumper Cover, For Sedan And Hatchback Models, Except St Model, For Use Without Chrome Trim, Without Integral Spoiler

Product Features:
  • For Sedan And Hatchback Models, Except ST Model, For Use Without Chrome Trim, Without Integral Spoiler, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bumper Cover (Part No.FO1000662PP)

Bumper Cover

from

$834.99
New CAPA Certified Premium Replacement Front Bumper Cover, For Hatchback And Sedan Models, Paint To Match

Product Features:
  • For Hatchback And Sedan Models, Paint To Match, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Power Window Motor Connector (Part No.PTA3002)

Power Window Motor Connector

from

$86.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Window Regulator: Power, 1 Pack (Part No.752-255)

Window Regulator: Power, 1 Pack

from

$66.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

2014 Ford Fiesta Body Parts

You count on your 2014 Ford Fiesta to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 33 Body Parts ranging in price from $19.99 to $849.99, you’re sure to find everything you need for your 2014 Ford Fiesta.

Brands matter. If you want to shop a specific Body Parts brand, we stock 8 different brands like Dorman, KAI, and Atlas Lift. 2014 Ford Fiesta Body Parts start as low as $19.99!

One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 5 extensive product reviews on 2014 Ford Fiesta Body Parts.

Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 2014 Ford Fiesta below to get started!

Top-Rated Body Parts Brands For Your 2014 Ford Fiesta

Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2014 Ford Fiesta running right for years to come. In our inventory you’ll find brands like Dorman, KAI, Atlas Lift, and even more.

Popular Dorman Body Parts

You’ll find popular Dorman brand products across Vehicle Mirrors. All are waiting to get your 2014 Ford Fiesta back on the road. Some of the top-rated Dorman products in these categories are:
Side Mirror Control Motor
from $73.99
(1)
Side Mirror Control Motor
Mirror Motor and Transmissions

FAQs for 2014 Ford Fiesta Body Parts

What are the most purchased Body Parts for the 2014 Ford Fiesta?

Out of 33 Body Parts for the 2014 Ford Fiesta, the most popular in our inventory are:
Rear Release Switch
from $52.99
This product is not rated
Rear Release Switch
Trunk Lock Switches
Lift Support
from $27.99
This product is not rated
Lift Support
Lift Supports
Integrated Door Latch Actuator
from $141.99
This product is not rated
Integrated Door Latch Actuator
Door Lock Motors