2014 Ford F-150 Air Suspension and Kits

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Shock Kit

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. Also included are rear coil springs that provide 1″-2″ of lift. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

Air springs can offer improved load handling when working in combination with an original equipment suspension. This suspension air helper spring kit includes the equipment needed to add air springs on specified vehicles.

Product Features:

• Ideal solution – this air suspension upfit kit can compensate for rear suspension sagging or squatting under load or when towing by providing added support to maintain vehicle height and handling
• Effective retrofit – designed for cost-effective installation, easy air spring inflation, and durability that can help protect the vehicle from damage to the vehicle frame and suspension components
• Complete kit – includes 2 air springs, 2 braided stainless steel air lines, valves, mounting brackets, and all hardware needed for installation, with no drilling, welding, or special tools required
• Exclusive design – the air springs in this kit feature a patent-pending fail-safe design that includes a stout internal coil spring

SuspAirBag/Bellows

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Give your Ford® F-150 an aggressive stance with the Rancho® 3-in. suspension system. This premium suspension system features upper control arms with preinstalled ball joints and Rancho RS9000®XL shocks and struts that allow customized damping control.

Product Features:

• ORDERING INFO — Box 3 of 3 for master kit RS66507R9, must order RS66507R9-1, RS66507R9-2 and RS66507R9-3 for a complete kit
• COMPATIBILITY — Designed for Ford F-150 trucks
• LIFTS AND LEVELS VEHICLE — Fits up to 35-in. tires, system lifts front by 3-in. while rear blocks raise the back an additional 1.5-in. to level the truck (trimming required for 35-in. tires, bumpers, winches, etc. affect height)
• COMPLETE SOLUTION — Includes Rancho RS9000®XL struts and rear shocks, upper control arms with ball joints, rear block kit, sway bar spacers and mounting hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks and struts feature nine-position knob for customized damping control and firmness for on-road and off-road flexibility
• BUILT TO PERFORM — Control arms keep the preinstalled ball joints in their normal operating range, provide additional caster to aid in alignment and add wheel travel
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life while control arms feature OE-style rubber bushings and ball joints for easy maintenance and quiet operation
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Maintains OE alignment specs and won’t affect electronic stability system, allows the use of OE wheels/tires, must use OE springs and top mounting components (tire size varies between manufacturers)

aFe Control introduces these Sway-A-Way High Performance replacement Coilovers for the 2010-2014 Ford F-150 SVT Raptor. These giant 3″ diameter Coilovers feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers remote reservoirs and better off road damping curves without sacrificing any on road comfort or handling. These front Coilovers are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. The kit comes pre-set for 2″-2.5″ of lift. Also included is a spanner wrench for you to adjust your ride height to find your perfect blend of performance and style. This aFe Control Suspension product is designed and engineered in our Corona, California facility.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

Firestone heavy duty Ride Rite air helper springs are the workhorse of our air helper spring line. The double convoluted air springs offer maximum load support as well as years of worry free service. Ride Rite air helper springs can be installed on most light trucks, motor homes, RVs, SUVs and vans. Ride Rite air helper springs are installed between the frame of the vehicle and the suspension, providing load support through the use of air pressure. Firestone is committed to providing the customer with premium air helper spring kits. Ride Rite air helper springs have become synonymous with quality, durability, and customer support. Each application is specifically designed to maximize the safe load carrying capacity, stability, and ride quality of the vehicle. Ride Rite air helper springs utilize a pair of convoluted air springs which can be adjusted for changing loads. These air springs are capable of 3200 to 5000 Pounds of load leveling capacity. Ride Rite air helper springs enhance the ride by reducing inter leaf friction. Please remember that air springs do not increase the Load Carrying capacity of your vehicle. Ride Rite kits are application specific and are designed for hassle free fitment to the OEM suspension.

Product Features:

• Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Level Off Center Loads, Individual Inflation Valves Allow For Adjustment Side To Side
• Reduce Suspension Fatigue Keeps Leaf Springs From Permanent Sagging Under Repeated Or Constant Load
• Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
• Increase Vehicle Stability, Absorbs Road Shock, Providing Ideal Ride Conditions For Passengers And Load
• Limited Lifetime Warranty

Firestone heavy duty Ride Rite air helper springs are the workhorse of our air helper spring line. The double convoluted air springs offer maximum load support as well as years of worry free service. Ride Rite air helper springs can be installed on most light trucks, motor homes, RVs, SUVs and vans. Ride Rite air helper springs are installed between the frame of the vehicle and the suspension, providing load support through the use of air pressure. Firestone is committed to providing the customer with premium air helper spring kits. Ride Rite air helper springs have become synonymous with quality, durability, and customer support. Each application is specifically designed to maximize the safe load carrying capacity, stability, and ride quality of the vehicle. Ride Rite air helper springs utilize a pair of convoluted air springs which can be adjusted for changing loads. These air springs are capable of 3200 to 5000 Pounds of load leveling capacity. Ride Rite air helper springs enhance the ride by reducing inter leaf friction. Please remember that air springs do not increase the Load Carrying capacity of your vehicle. Ride Rite kits are application specific and are designed for hassle free fitment to the OEM suspension.

Product Features:

• Keep The Vehicle Level: Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Level Off Center Loads, Individual Inflation Valves Allow For Adjustment Side To Side
• Reduce Suspension Fatigue, Keeps Leaf Springs From Permanent Sagging Under Repeated Or Constant Load
• Reduce Bottoming Out, Protective Air Cushion Softens Contact Between The Axle And Frame
• Increase Vehicle Stability, Absorbs Road Shock, Providing Ideal Ride Conditions For Passengers And Load

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Max Performance Synthetic Power Steering Fluid

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions

Designed to level out your Ford® F-150, the Rancho® rear lift block kit raises the rear an additional 1.5-in. to accommodate larger wheel/tire combinations.

Product Features:

• COMPATIBILITY — Designed for Ford F-150 trucks
• LIFTS AND LEVELS — Raises the rear of the truck an additional 1.5-in. to level out the entire vehicle (aftermarket bumpers, winches, etc. affect lift height)
• FITS LARGER TIRES — Allows the use of larger wheel/tires without body or fender modifications (tire size varies by manufacturer)
• EASY TO INSTALL — Kit includes two rear blocks, four coated U-bolts and eight nuts that install easily
• RESISTS CORROSION — Zinc-coated hardware resists rust and corrosion
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with a Rancho LEVEL IT system, Rancho quickLIFT®, performance upper control arms, Rancho RS9000®XL or RS5000®X rear shocks, sold separately, see Rancho catalog for details

Skyjacker(R) suspension leveling kits are just what you need to get your truck or suv riding level again. They feature specially designed spacers to give you the additional lift necessary to make your vehicle stance level. Available for either the front or rear, these skyjacker suspension leveling kits are an excellent choice to lift your truck or suv.

Product Features:

• 6 Leveling Kit Merchandiser Packages To Choose From, With The Hottest Moving Applications
• Levels Out Factory Rake Not Affecting Your Ride Quality
• Allows For The Use Of Larger Wheel And Tire Combinations
• Easy To Install, Spacers Mount On Top Of The Strut, No Strut Compressor Required

Ride Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3200 to 5000 Pounds per set.

Product Features:

• Level The Vehicle Front To Rear And Side To Side
• Adjustability 5 To 100 PSI
• Stabilize The Vehicle While Loaded
• Maximize Vehicles Load Carrying Capacity
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Quick Strut Kit

Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:

• MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
• EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
• EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
• BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
• CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Air Fitting: Resists air leakage.

Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:

• MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
• EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
• EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
• BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
• CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Air Fitting: Resists air leakage.

Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:

• MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
• EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
• EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
• BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
• CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Air Fitting: Resists air leakage.

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)