2014 Ford Explorer Drivetrains

Name: No-Slip Traction System
Brand: Powertrax
SKU: 9206883108
Price: 544.99 USD

Below you will find various in-demand Ford Drivetrains, components and accessories for your 2014 Explorer. Advance Auto Parts has popular Explorer parts like 4WD Components, Spindles, Transfer Cases and more. You’ll also find aftermarket and OEM Drivetrains for other Explorer model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2014 Ford Explorer Drivetrains below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2014 Ford Explorer Drivetrains Categories

Differential Oil

Drive Shaft and Axles

Rear Differential Cover Gaskets

Differential Covers

Drive and Prop Shaft Assemblies

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

4WD Switches

Transfer Case Output Shaft Seals

Differential Carriers

Differential Bearing Kits

Differential Rebuild Kits

Differential Pinion Seals

Differential Disc Kits

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Spindle Lock Nuts

Drive Shaft Repair Kits

Differential Lock Assemblies

Differential Carrier Bearings

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Differential Carrier Bearing Shims

Input Shaft Seals

Differential Crush Sleeves

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Oil Pump Housing Seals

Limited Slip Differential Assemblies

Power Take Off Assemblies

Power Take Off Unit (PTU) Assemblies

Essential Drivetrains for 2014 Ford Explorers

from

$544.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$52.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$369.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits standard rotation Ford 8.8″
8.80″ ring gear diameter
30 spline pinion
10 ring gear bolts
4.11 ratio

from

$20.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$13.29

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$404.99

Product Features:

Clutch kit
Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
14 piece kit
Carbon fiber clutches

from

$294.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$299.99

B&M Cast Aluminum Differential Covers are designed to strengthen the differential by preventing case distortion and ring gear & bearing cap deflection. Constructed of A356.0-T6 aluminum, these rugged covers significantly increase the fluid capacity and dissipate heat much faster than the stock factory unit to prolong the life of your ring and pinion gears. Additional features include an engraved B&M logo, drain and fill port locations, a magnetic drain plug for catching ferrous metal particles, and complete hardware and installation instructions.

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Cast Aluminum

from

$11.99

Pinion gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:

Pinion gear thrust washer for Ford 8.8″
0.875″ diameter cross pin shaft applications only

from

$262.99

This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:

Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles
Quality materials – all components are built for reliable longevity and performance
Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
Trustworthy quality – backed by team of designers and engineers in the United States

from

$7.99

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$108.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

DANA 35 JEEP 1980-06 MASTER BRG KIT ’97 UP DANA 35 DODGE DAKOTA FRONT

from

$24.99

Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:

Maximizes horsepower
Extends gear and bearing life
Reduces operating temperature
Lower coefficient of friction
Superior corrosion protection
Separates rapidly from water
For use with open, limited-slip and locking differential
Contains limited-slip friction modifier
Made in USA

from

$10.99

Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

Product Features:

Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
7/8″ x 20 thread
1 1/8″ socket

from

$3.99

Replacement ring gear bolt for Model 20, Grand Cherokee 35, “Super” Dana 30 & Dana 50. 7/16″ x 20.

Product Features:

Ring gear bolt for AMC Model 20, “Super” 35, Dana Spicer “Super” 30 and Dana Spicer 50
7/16″ 20 thread

from

$42.99

Cross pin shaft (0.875″) for ’86 and newer 8.8″ Ford.

Product Features:

Cross pin shaft for Ford 8.8″
0.875″ diameter

from

$4.79

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1499.99

The factory power take off unit (PTU) on certain Ford, Lincoln and Mercury vehicles often fails when extreme temperatures overheat the internal lubricant. The heat can cause catastrophic damage so severe that it becomes nearly impossible to salvage and rebuild the PTU assembly. In extreme cold conditions, the factory seals can fail and cause oil to leak from the unit. Common symptoms of these problems can include a metallic rattling sound and/or an unusual, natural gas-like scent from beneath the vehicle. This patented, 100-percent newly manufactured Dorman OE FIX PTU has been redesigned for greater resilience during thermal extremes, and features an added heatshield to reduce internal temperatures as well as a drain plug to allow easy replacement of the gearbox lubricant. Upgraded seals also help prevent premature degradation in extreme cold temperatures, providing an all-around more reliable replacement. For vehicle owners, that means a more permanent replacement. For fleet managers, it can help decrease maintenance costs and vehicle downtime.

Product Features:

Upgraded design – this patented, 100-percent newly manufactured PTU is engineered and tested to increase durability compared to the factory part on certain Ford, Lincoln and Mercury vehicles
Better heat resistance – incorporates a heat shield not found on the factory PTU that helps reduce heat transfer to the gearbox lubrication by up to 30 degrees Fahrenheit to prevent thermal breakdown
Greater cold resistance – seals are made from an improved material that can withstand temperatures as low as -40 degrees Fahrenheit and help prevent future oil leaks
Added serviceability – unlike the original equipment PTU, this replacement includes a drain plug to allow for easier routine servicing of the gearbox lubrication to further help prevent future issues

from

$37.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$2.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

Meets or exceeds OE specifications

from

$49.99

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$59.99

Product Features:

Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
Interlocking design makes installation much easier

from

$98.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for AMC Model 35 differential. This kit contains carrier bearings, races and shims.

Product Features:

Fits AMC Model 35 with 27 spline axles
Includes carrier bearings and races and “super” carrier shim kit

from

$246.99

Yukon forged yoke for Ford 8.8″ with a 1350 U/joint size (stronger than billet). 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Ford 8.8″
30 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
U-bolt style

from

$15.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$6.99

Side gear thrust washer (0.750″ shaft) for 8.8″ Ford.

Product Features:

Side gear thrust washer for Ford 8.8″
0.750″ diameter cross pin shaft applications only

from

$774.99

Yukon Trac Loc positraction, Ford 8.8″, 31 spline, with Carbon Fiber clutches.

Product Features:

Trac Loc positraction carrier case
Includes spider gears
Fits Ford 8.8″ with 31 spline axles
Carbon fiber clutches

from

$194.99

Worn or damaged differential end yoke causing driveline Vibrations! This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:

Direct replacement – this differential end yoke matches the fit and construction of the original yoke
Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
Validated fit – this differential end yoke has been tested to confirm accurate fit

Upgrade your 2014 Ford Explorer with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2014 Ford Explorer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your Explorer functioning at its best. At Advance Auto Parts, we offer a wide selection of 90 Drivetrains for the 2014 Ford Explorer, designed to meet your needs without breaking the bank. From 4WD Component replacements to Spindles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2014 Ford Explorer at great prices. Our Drivetrains inventory for this model ranges from just $4.49 to $1,617.99, with an average price of $254.43. Our 90 Drivetrains in stock come from 15 trusted brands, so you’re sure to find the right part for your 2014 Ford Explorer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2014 Ford Explorer, we stock popular OEM and aftermarket Drivetrains from top names like Royal Purple, Valvoline, National, and more. Royal Purple Drivetrains start at just $24.99 and boast an impressive 4.8 stars average rating from customers. Valvoline and National also bring quality to the table, with Drivetrains available starting at $10.99, and at an average 4.8 stars rating. With 3,523 customer reviews and counting, our 2014 Ford Explorer Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2014 Ford Explorer is always ready to roll. We’re committed to providing you with everything you need to keep your Explorer in top shape, all in one place. Start shopping confidently below for your 2014 Ford Explorer!

Best-Selling 4WD Components for 2014 Ford Explorers

Enhance the driving experience in your Ford with 1 quality 4WD Component components, starting at $116.99.

show more show less

from

$116.99

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Most Popular 2014 Ford Explorer Spindles

Customize your Ford with 1 Spindles products like Spindle Lock Nuts, all priced under $4.49.

show more show less

from

$4.49

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Made with premium grade materials
Quality construction for durability
Designed for under vehicle environment
Application specific for this vehicle

Top Picks for 2014 Ford Explorer Transfer Cases

Upgrade Ford Explorers with top-quality Transfer Cases parts, including 3 OEM and aftermarket selections for your 2014 model.

show more show less

from

$52.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$17.99

Design type: spring loaded
Temperature: -40 Deg. F to 400 Deg. F /-40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$13.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

In-Demand Differentials for 2014 Ford Explorers

Select from 67 premium Differentials parts for your 2014 Ford Explorer, with prices ranging from $5.99 to $1,115.99.

show more show less

from

$35.99

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$24.99

Maximizes horsepower
Extends gear and bearing life
Reduces operating temperature
Lower coefficient of friction
Superior corrosion protection
Separates rapidly from water
For use with open, limited-slip and locking differential
Contains limited-slip friction modifier
Made in USA

from

$10.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$19.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

from

$9.99

Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

Product Features:

Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
0.480″ tall

from

$11.99

Pinion gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:

Pinion gear thrust washer for Ford 8.8″
0.875″ diameter cross pin shaft applications only

from

$5.99

Ford 7.5″ & 8.8″ ring gear bolt, standard Open & TracLoc. 7/16″ x 20.

Product Features:

Ring gear bolt for Ford 7.5″ and 8.8″
7/16″ x 20

from

$7.99

Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:

Pinion nut for Ford 7.5″, 8″ and 9″
3/4″ x 20 thread
1 1/6″ socket

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$99.99

Yukon outer stub axle for Chrysler 9.25″ front. This axle uses a 1485 u/joint and has 33 splines.

Product Features:

Fits Ford 8.8″
Steel

from

$239.99

Product Features:

FRD 10BL 8.8 R/P 4.10 MG

from

$134.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.

Product Features:

Fits Ford 8.8″
Includes carrier bearings and races and “super” carrier shim kit

from

$329.99

Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.

Product Features:

EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

from

$96.99

2 piece solid spacer for Ford 8.8 and 7.5.

Product Features:

Crush sleeve eliminator kit for Ford 7.5″ and 8.8″

from

$59.99

Product Features:

Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
Interlocking design makes installation much easier

from

$8.99

Pinion gear thrust washer (0.750″ shaft) for 8.8″ Ford.

Product Features:

Pinion gear thrust washer
Fits Ford 8.8″
0.750″ I.D.

from

$238.99

Product Features:

FRD 10BL 8.8 R/P 3.55 MG

from

$269.99

8.8″ 31 spline standard Open case (7/8 X-PIN HOLE).

Product Features:

Standard open carrier case
Fits Ford 8.8″ with 31 spline axles
Does not include spider gears
0.875″ cross pin shaft diameter

from

$167.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits 2009 and down Ford 8.8″
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$57.99

8.8″ Ford 7/8″ diameter Notched cross pin shaft (.875″ for ’86 and newer). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.

Product Features:

Notched cross pin shaft for Ford 8.8″
0.875″ diameter
Not compatible with Spartan Locker or Powertrax Lock Right

from

$42.99

Cross pin shaft (0.875″) for ’86 and newer 8.8″ Ford.

Product Features:

Cross pin shaft for Ford 8.8″
0.875″ diameter

from

$6.99

Side gear thrust washer (0.750″ shaft) for 8.8″ Ford.

Product Features:

Side gear thrust washer for Ford 8.8″
0.750″ diameter cross pin shaft applications only

from

$241.99

8.8″ Ford TracLoc (with short ears–for late models only) clutch set, both sides.

Product Features:

Clutch kit
Fit Ford 8.8″ Trac Loc positraction

from

$239.99

Product Features:

FRD 10BL 8.8 R/P 3.73 MG

Most Sold 2014 Ford Explorer Drive Shafts and Axles

Explore our best-selling Ford parts for the 2014 Explorer among 18 OEM and aftermarket options starting from $16.29.

show more show less

from

$21.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$16.29

Product Features:

Brand may vary by location

from

$193.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$119.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$89.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$61.99

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$152.99

Manufactured to be an OE replacement, CV axles use 100% new materials and are engineered for ease of installation and long service.

Product Features:

All New Materials
Engineered for OE Fitment
-40 Degree Rated CV Boots
Moly-Blend Grease in inner and outer joints
New nut and mounting hardware included if required

from

$102.99

Manufactured to be an OE replacement, CV axles use 100% new materials and are engineered for ease of installation and long service.

Product Features:

All New Materials
Engineered for OE Fitment
-40 Degree Rated CV Boots
Moly-Blend Grease in inner and outer joints
New nut and mounting hardware included if required

from

$98.99

N

Product Features:

High moly CV joint grease with stainless-steel boot bands

from

$654.99

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100 percent dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

Built to match O.E. form, fit and function.
100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$175.99

C/V Axle

from

$1617.99

This power take off assembly, or PTU, directly replaces the stock assembly on specific vehicle years, makes and models. Each PTU is newly manufactured and rigorously tested to restore original performance.

Product Features:

Product Features:

Direct replacement – this power take off assembly matches the function and performance of the original PTU on certain vehicle applications
Effective fix – restores drivability and all-wheel drive (AWD) functionality after original PTU fails
Durable construction – built for reliable longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$1499.99

Upgraded design – this patented, 100-percent newly manufactured PTU is engineered and tested to increase durability compared to the factory part on certain Ford, Lincoln and Mercury vehicles
Better heat resistance – incorporates a heat shield not found on the factory PTU that helps reduce heat transfer to the gearbox lubrication by up to 30 degrees Fahrenheit to prevent thermal breakdown
Greater cold resistance – seals are made from an improved material that can withstand temperatures as low as -40 degrees Fahrenheit and help prevent future oil leaks
Added serviceability – unlike the original equipment PTU, this replacement includes a drain plug to allow for easier routine servicing of the gearbox lubrication to further help prevent future issues

from

$1154.99

The factory power take off unit (PTU) on certain Ford and Lincoln vehicles often fails when extreme temperatures overheat the internal lubricant. The heat can cause catastrophic damage so severe that it becomes nearly impossible to salvage and rebuild the PTU assembly. In extreme cold conditions, the factory seals can fail and cause oil to leak from the unit. Common symptoms of these problems can include a metallic rattling sound and/or an unusual, natural gas-like scent from beneath the vehicle. This patented, 100-percent newly manufactured Dorman OE FIX PTU has been redesigned for greater resilience during thermal extremes, and features an added heatshield to reduce internal temperatures as well as a drain plug to allow easy replacement of the gearbox lubricant. Upgraded seals also help prevent premature degradation in extreme cold temperatures, providing an all-around more reliable replacement. For vehicle owners, that means a more permanent replacement. For fleet managers, it can help decrease maintenance costs and vehicle downtime.

Product Features:

Upgraded design – this patented, 100-percent newly manufactured PTU is engineered and tested to increase durability compared to the factory part on certain Ford and Lincoln vehicles
Better heat resistance – incorporates a heat shield not found on the factory PTU that helps reduce heat transfer to the gearbox lubrication by up to 30 degrees Fahrenheit to prevent thermal breakdown
Greater cold resistance – seals are made from an improved material that can withstand temperatures as low as -40 degrees Fahrenheit and help prevent future oil leaks
Added serviceability – unlike the original equipment PTU, this replacement includes a drain plug to allow for easier routine servicing of the gearbox lubrication to further help prevent future issues

from

$271.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$246.99

Fits Ford 8.8″
30 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
U-bolt style

from

$93.99

C/V Axle

from

$27.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Top-Rated Drivetrains Brands For Your 2014 Ford Explorer

Shop for the best-rated brands offering Drivetrains and other products for your 2014 Ford Explorers. Below you’ll find some of our best rated Drivetrains from Royal Purple, Valvoline, and National, and more. Drivetrains from these brands that fit a 2014 Explorer start at just $10.99 and are rated as high as 4.8 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Royal Purple 2014 Ford Explorer Drivetrains

When it comes to maintaining or upgrading your 2014 Ford Explorer, using quality Drivetrains is essential to ensure durability and a perfect fit. Royal Purple ticks all of those boxes. We offer a wide selection of Royal Purple Drivetrains, specifically designed for the 2014 Ford Explorer. With over 1 Royal Purple brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $24.99. Plus, with over 74 customer reviews and an average rating of 4.8 stars, you can trust that our Royal Purple Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $24.99

(74)

MaxGear SAE 75W90 High Performance Gear Oil w/Friction Modifier Additive, 1 QT

“It has the friction modifier in it for Ford.”

Popular Valvoline 2014 Ford Explorer Drivetrains

Valvoline auto parts is one of the highest quality Drivetrain brands in the market. Any 2014 Ford Explorer owner should feel confident when installing genuine Valvoline parts in their vehicle. To ensure the best fit and performance for your 2014 Explorer, Advance Auto Parts carries a full inventory of 1 Valvoline Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these Valvoline Drivetrains range up to $35.99, plus, with more than 446 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $35.99

(446)

MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon

“Good quality great price”

FAQs for 2014 Ford Explorer Drivetrains

Which Drivetrains are best-sellers for 2014 Ford Explorers?

Out of 90 Drivetrains that fit 2014 Ford Explorers, the following parts are the top sellers:

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart (12507272) – $19.99
Drive Axle Shaft Seal (18445461) – $21.99
Wheel Seal (11407775) – $16.29

What’s the price range for 2014 Ford Explorer Drivetrains?

Drivetrain prices for the 2014 Ford Explorer start at $4.49 and go up to $1,617.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2014 Ford Explorer?

The average price for Drivetrains for the 2014 Ford Explorer is $254.43. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Ford Explorer model years?

Yes, we currently carry Drivetrains for 33 model years of Ford Explorers between 1991 and 2025. Drivetrains are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Drivetrains for my 2014 Ford Explorer?

The cheapest 2014 Ford Explorer Drivetrains we carry in stock are:

Axle Nuts (20579490) – $4.49
Ford 7.5" & 8.8" Ring Gear Bolt, Standard Open & Tracloc (11642766) – $5.99
Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (11643440) – $6.99
Cross Pin Bolt (11643346) – $6.99
Pinion Nut (11643229) – $7.99

What are the top-rated Drivetrains that fit the 2014 Ford Explorer?

Out of 3,523 reviews by customers, our 2014 Ford Explorer Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2014 Ford Explorer and their top-rated products:

Differentials
- MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (8150020) – $35.99
- MaxGear SAE 75W90 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (7070082) – $24.99
- Differential Pinion Seal (20441829) – $10.99

What types of Drivetrains do you sell for my 2014 Ford Explorer?

As of 3/1/26, these are some of the most in-demand types of Drivetrains for a 2014 Ford Explorer:

Can I get help with 2014 Ford Explorer Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.

What is your return policy for Ford Explorer Drivetrains?

Advance Auto Parts keeps returns simple. For new Ford Explorer Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2014 Ford Explorer Drivetrains

Powertrax – No-Slip Traction System (Part No.9206883108)

Schaeffler – General Seal (Part No.SS2911)

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" In A 4.11 Ratio (Part No.24097)

National – Drive Axle Shaft Seal (Part No.100537)

Schaeffler – Shaft Seal (Part No.SS2480)

Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)

Dorman – Drive Shaft (Part No.938-800)

B & M – Rear End Cover 1 EA B&M (Part No.40297)

Yukon Gear – Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33299)

Dorman – Differential Clutch Kit (Part No.697-780)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Motive Gear – Differential Bearing Kit – Koyo (Part No.R35JR)

Royal Purple – MaxGear SAE 75W90 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01300)

Yukon Gear – Ppinion Nut 7/8-20 Thread, 1 1/8 Socket (Part No.33146)

Yukon Gear – Replacement Ring Gear Bolt For Model 20, Grand Cherokee 35, "Super" Dana 30 & Dana 50 – 7/16" X 20 (Part No.33040)

Yukon Gear – Cross Pin Shaft (0.875") For ’86 And Newer 8.8" Ford (Part No.33331)

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)

Dorman – Power Transfer Unit Assembly (OE Fix) (Part No.600-234XD)

National – Shaft Repair Sleeve (Part No.99157)

Pro-King – Differential Crush Sleeve (Part No.761A034)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-984)

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Yukon Gear – Carrier Installation Kit For Amc Model 35 Differential (Part No.57011)

Yukon Gear – Forged Yoke For Ford 8.8" With A 1350 U/Joint Size (Part No.41051)

Schaeffler – Shaft Seal (Part No.SS2865)

Yukon Gear – Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33298)

Yukon Gear – Trac Loc Positraction, Ford 8.8", 31 Spline, With Carbon Fiber Clutches (Part No.20130)

Dorman – Differential Pinion Yoke Assembly (Part No.697-532)

Carquest Premium – 4WD Switch (Part No.FWC1117)

Beck/Arnley – Axle Nuts (Part No.103-0533)

Schaeffler – General Seal (Part No.SS2911)

National – Transfer Case Output Shaft Seal (Part No.711139)

National – Transfer Case Input Shaft Seal (Part No.711140)

Valvoline – MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Royal Purple – MaxGear SAE 75W90 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01300)

National – Differential Pinion Seal (Part No.100552)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart (Part No.889787)

Yukon Gear – Crush Sleeve (Part No.33085)

Yukon Gear – Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33299)

Yukon Gear – Ford 7.5" & 8.8" Ring Gear Bolt, Standard Open & Tracloc (Part No.33053)

Yukon Gear – Pinion Nut (Part No.33154)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Yukon Gear – Steel Cover For Ford 8.8" (Part No.32328)

Motive Gear – Differential Ring and Pinion (Part No.F8.8-410)

Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 5 Gallon (Part No.VV981)

Yukon Gear – Crush Sleeve Eliminator Kit For Ford 8.8" & 7.5" (Part No.55040)

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Yukon Gear – Pinion Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33297)

Motive Gear – Differential Ring and Pinion (Part No.F8.8-355)

Yukon Gear – Standard Open Carrier Case, Ford 8.8", 31 Spline (Part No.20077)

Yukon Gear – Pinion Install Kit For Ford 8.8" Differential (Part No.13041)

Yukon Gear – 8.8" Ford 7/8" Diameter Notched Cross Pin Shaft (.875" For ’86 And Newer) (Part No.33434)

Yukon Gear – Cross Pin Shaft (0.875") For ’86 And Newer 8.8" Ford (Part No.33331)

Yukon Gear – Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33298)

Yukon Gear – 8.8" Ford Tracloc Clutch Set, Both Sides (Part No.16018)

Motive Gear – Differential Ring and Pinion (Part No.F8.8-373)

National – Drive Axle Shaft Seal (Part No.710429)

Driveworks – Wheel Seal (Part No.S-710429)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV713961)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV713951)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV556312)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-982)

Carquest Premium – New CV Axle Assembly (Part No.NCV718121)

Carquest Premium – New CV Axle Assembly (Part No.NCV718111)

Carquest Premium – New CV Axle (Part No.NCV512040)

Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-2003)

Carquest Premium – C/V Axle (Part No.NCV717171)

Dorman – Power Transfer Unit Assembly (Part No.600-247)

Dorman – Power Transfer Unit Assembly (OE Fix) (Part No.600-234XD)

Dorman – Power Transfer Unit Assembly (OE Fix) (Part No.600-239XD)

Carquest Premium – CV Axle Assembly (Part No.NCV11051)

Yukon Gear – Forged Yoke For Ford 8.8" With A 1350 U/Joint Size (Part No.41051)

Carquest Premium – C/V Axle (Part No.NCV717221)

Schaeffler – Shaft Seal (Part No.SS2422)