2014 Audi A8 Quattro Belts and Hoses

Essential 2014 Audi A8 Quattro Belts and Hoses

Dayco – Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (Part No.5060930)

Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count

from

$53.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 43 Long, 4 Rib Count (Part No.5040430)

Poly Rib Belt Serpentine Belt; 43 Long, 4 Rib Count

from

$27.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K050385)

Micro-V« Serpentine Drive Belt

from

$33.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

INA – Accessory Belt Idler Pulley (Part No.G6020397097INA)

Accessory Belt Idler Pulley

from

$16.23
The INA Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 65mm Dia., 24.5mm Width, Smooth (Part No.89161)

Serpentine Idler/Tensioner Pulley; Polymer, 65mm Dia., 24.5mm Width, Smooth

from

$20.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today.
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Dayco, Acc. Belt Idler Pulley (Part No.G60201221093DAY)

Dayco, Acc. Belt Idler Pulley

from

$25.79
The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Elring – Water Pump O-Ring (Part No.G3059279771ELR)

Water Pump O-Ring

from

$3.97
Water Pump O-Ring

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000861629CON)

Multi Rib (Serpentine) Belt

from

$32.99
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W100028005BAN)

Multi Rib (Serpentine) Belt

from

$19.04
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100094011MBL)

Multi-Rib (Serpentine) Belt

from

$22.60
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000861555CON)

Multi Rib (Serpentine) Belt

from

$19.17
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.950488A)

Serpentine Belt Tensioner: 1 Piece

from

$184.99
Litens Automotive is the original equipment (O.E.) supplier for this application. This genuine Litens replacement tensioner is also manufactured by Litens, the world’s largest supplier of original equipment power transmission products. This part is specifically designed for Audi applications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Heavy duty thermoplastic pulley construction.
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • All hardware included for easy installation (Bolt), saving you time!
  • Install pin included for ease of installation
  • Installation instructions included
See More

Hutchinson – Hutchinson Accessory Belt Tensioner (Part No.G6000311189HUT)

Hutchinson Accessory Belt Tensioner

from

$274.63
The Hutchinson Accessory Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • High tension spring assembly
  • Precision bearing assembly
  • High quality cast components
  • Durable long life performance.
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999843A)

Serpentine Belt Tensioner: 1 Piece

from

$97.99
This Litens belt tensioner is supplied by the original equipment (O.E.) tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part. As with the original equipment part, this replacement tensioner is manufactured in Europe and produced for serpentine belt routing applications. This part corresponds to the 2013-2016 Audi and VW applications w/3.0L Diesel applications. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. This higher damping consequently reduces arm motion and wear as well as an optimized install feature for ease on tensioner replacement. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Designed and engineered by the Original Equipment supplier of this application
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Heavy duty thermoplastic pulley for long life. Pulley specs: 70mm (OD) x 17mm (ID) x 26mm (Width)
  • Install Pin Included for Ease of Installation.
  • Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt.
  • Belt removal is required to change the tensioner. Therefore, doing both together will extend accessory drive life and lower overall labor versus performing these services separately.
  • Installation instructions included.
See More

Hutchinson – Accessory Belt Tensioner (Part No.G6000412011HUT)

Accessory Belt Tensioner

from

$243.97
The Hutchinson Accessory Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • High tension spring assembly
  • Precision bearing assembly
  • High quality cast components
  • Durable long life performance.
See More

APA/URO Parts – C Clip Retainer (Part No.G2050240713APA)

C Clip Retainer

from

$1.30
C Clip Retainer

Litens – O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 85 mm Diameter (Part No.900142A)

O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 85 mm Diameter

from

$72.99
This Litens pulley is manufactured by the original equipment pulley supplier to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Germany to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. This is a 85mm O.D. grooved pulley (without flange) for Audi applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 76 mm Diameter (Part No.900170A)

O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 76 mm Diameter

from

$27.99
This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Germany using the O.E. specified split steel pulley design and meets all performance and durability requirements. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 78 mm Diameter (Part No.951495A)

O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 78 mm Diameter

from

$105.99
This pulley is manufactured by Litens Automotive – supplier of this part to the original equipment manufacturer. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Germany using the O.E. specified split-steel pulley design and meets all performance and durability requirements. Applications include Audi, and Volkswagen vehicles. Includes new integrated bolt/washer and spacer. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Litens – O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 65 mm Diameter (Part No.900677A)

O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 65 mm Diameter

from

$46.99
This Litens supplied pulley is manufactured by the original equipment (O.E.) manufacturer. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Heavy duty thermoplastic pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Installation instructions included
See More

Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 76 mm Diameter (Part No.419-628)

Idler/Tensioner Pulley: Specific Fit, Steel, 76 mm Diameter

from

$36.49
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:
  • Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
  • Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

Litens – O.E Quality Idler/Tensioner Pulley Direct Fit Thermoplastic 75.5 mm Diameter (Part No.900618A)

O.E Quality Idler/Tensioner Pulley Direct Fit Thermoplastic 75.5 mm Diameter

from

$55.99
This Litens supplied pulley is manufactured to original equipment specifications. This part is specifically designed for Audi applications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. Our line is made up of over 900 ADTs, Pulleys, and OADs. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
  • Heavy duty thermoplastic pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • All hardware included for easy installation (Bolt, Dust Shield, Spacer), saving you time!
  • Installation instructions included
See More

CRP – Hose Clamp (Part No.Y3063860142CRP)

Hose Clamp

from

$2.07
Hose Clamp

2014 Audi A8 Quattro Belts and Hoses

You count on your 2014 Audi A8 Quattro to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 30 Belts and Hoses ranging in price from $2.07 to $184.99, you’re sure to find everything you need for your 2014 Audi A8 Quattro.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 12 different brands like Dayco, Driveworks, and Litens. 2014 Audi A8 Quattro Belts and Hoses start as low as $2.07!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 653 extensive product reviews on 2014 Audi A8 Quattro Belts and Hoses.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2014 Audi A8 Quattro below to get started!

Top-Rated Belts and Hoses Brands For Your 2014 Audi A8 Quattro

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2014 Audi A8 Quattro running right for years to come. In our inventory you’ll find brands like Dayco, Driveworks, Litens, and even more.

Popular Dayco Belts and Hoses

You’ll find popular Dayco brand products across Serpentine and V Belts. All are waiting to get your 2014 Audi A8 Quattro back on the road. Some of the top-rated Dayco products in these categories are:
Poly Rib Belt Serpentine Belt; 100 Long, 6 Rib Count
from $56.99
(20)
Poly Rib Belt Serpentine Belt; 100 Long, 6 Rib Count
Serpentine Belts
Poly Rib Belt Serpentine Belt; 98.03 Long, 6 Rib Count
from $61.99
(268)
Poly Rib Belt Serpentine Belt; 98.03 Long, 6 Rib Count
Serpentine Belts