2013 Ford F-450 Super Duty Alternators and Starters
More 2013 Ford F-450 Super Duty Alternators and Starters Categories
If you’re looking for an original Alternators and Starters replacement for a 2013 Ford F-450 Super Duty, you can search through our selection below. You’ll also find aftermarket and OEM Alternators and Starters to meet your needs.
Essential 2013 Ford F-450 Super Duty Alternators and Starters
OE+ – Remanufactured Alternator (Part No.F40002247285IAP)
from
$281.03
Are you looking for a quality replacement part for your vehicle’s electrical system? Today’s remanufactured alternator is a complex combination of inner workings, and we completely remanufacture them to our own premium standard. All terminals are cleaned and replated. The slip rings are polished or replaced to maintain proper contact. The rectifier, diodes, rotor and bearings are performance tested or replaced for maximum output. All housings are cleaned and refinished and all stators are tested for integrity and recoated for corrosion prevention.
Product Features:
See More
Product Features:
- OE-Equivalent Direct Fit Application.
- Fully tested to meet OE specifications.
- Provides exceptional reliability.
Carquest Premium – Alternator: Remanufactured, 130 Amps (Part No.8522A)
from
$180.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Bosch – Alternator: New, 95 Amps (Part No.AL7546N)
from
$275.99
Bosch has been a major supplier of new alternators to Original Equipment vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators. Bosch Premium Alternators are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions.
Product Features:
See More
Product Features:
- 100% new components withstand the harshest environments for the best performance and longest life
- Built specifically to withstand excessive heat and high electrical demands.
- All mounting points 100% gauged and resized or rethreaded for proper fit
- Free 24-hour Roadside Assistance Protection with purchase of any Bosch Alternator
Carquest Professional – Alternator: New, 105 Amps (Part No.7798AN)
from
$258.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- All new components are utilized to ensure long service life
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
- Rotors and stators are load tested and double insulated for maximum charging performance
- All units are 100% triple tested to ensure quality and performance
Carquest Professional – Alternator: New, 135 Amps (Part No.8307AN)
from
$349.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- All new components are utilized to ensure long service life
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
- Rotors and stators are load tested and double insulated for maximum charging performance
- All units are 100% triple tested to ensure quality and performance
Bosch – Alternator: Remanufactured, 175 Amps (Part No.AL7681X)
from
$412.99
Bosch has been a major supplier of new alternators to Original Equipment vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators. Bosch Premium Alternators are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions.
Product Features:
See More
Product Features:
- Full-load tested to guarantee compliance with Bosch’s strict performance specifications
- 100% factory tested, units are remanufactured (not rebuilt)
- Built to last – uses high quality materials and the most technologically advanced developments.
Carquest Premium – Alternator: Remanufactured, 120 Amps (Part No.8477A)
from
$225.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Motorcraft – MOTOR – WINDOW (Part No.WPT-119)
from
$19.99
MOTOR – WINDOW
Carquest Premium – Connector (Part No.PTA1011)
from
$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Output Shaft Speed Sensor Connector (Part No.PTA1023)
from
$49.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Motorcraft – Starter (Part No.F5000350723MTR)
from
$272.00
Starter
Carquest Premium – Starter Remanufactured Premium (Part No.6646S)
from
$143.99
Carquest Premium Starters and all components are thoroughly inspected and tested to meet or exceed O.E.M. specifications. Every remanufactured unit is 100% performance tested from component through final assembly, to ensure dependable service and reliable performance. Remanufactured (not rebuilt) to meet or exceed OE quality in fit, form, and function.
Product Features:
See More
Product Features:
- Each unit is triple-tested to ensure quality and performance
- All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
- Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
Carquest Premium – Starter Remanufactured Premium (Part No.19247S)
from
$231.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Professional – Starter-New (Part No.6696SN)
from
$269.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- All new components are utilized to ensure long service life
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Armatures and commutators are 100% load tested
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-10553
Carquest Premium – Starter Remanufactured (Part No.17578S)
from
$213.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- 100% remanufactured drive clutch assembly ensures lasting performance
- Armatures and commutators are 100% load tested
- New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Premium – Starter Remanufactured Premium (Part No.6696S)
from
$222.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- 100% remanufactured drive clutch assembly ensures lasting performance
- Armatures and commutators are 100% load tested
- New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Standard – Starter Remanufactured Standard (Part No.17578SV)
from
$159.99
Carquest Standard starters are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard starters are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Motorcraft – Starter, Remanufactured (Part No.F5000672936MTR)
from
$333.14
Motorcraft® starter motor assemblies are built to fit Ford and Lincoln vehicles and are available in new or remanufactured versions to help meet your customers’ needs.
Product Features:
See More
Product Features:
- Recommended for two- to eight-year-old vehicles
- Meets Ford Motor Company engineering specifications for durability and reliability
- Withstands 20,000 cranks or better than 18 years of 3-times-a-day starting
Carquest Standard – Starter 6646SV: Remanufactured (Part No.6646SV)
from
$116.99
Carquest Standard starters are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard starters are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Built to meet OE quality in fit, form, and function.
- Units are rebuilt with critical parts and components that are 100% new.
- Designed to meet OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Designed to meet OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Locksmart – Ignition Lock Cylinder (Part No.LC63180)
from
$75.99
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
- Constructed from high-grade materials to ensure durability and longevity
- Undergoes 100% testing for proper fit, form, and function
- As a global manufacturer, we maintain complete quality control throughout the manufacturing process
Carquest Premium – Ignition Lock Cylinder CSC1201 (Part No.CSC1201)
from
$75.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Dorman – Ignition Lock Cylinder: Two Keys Included (Part No.924-724)
from
$52.99
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.
Product Features:
See More
Product Features:
- Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
- Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Motorcraft – Motorcraft Ignition Lock Cylinder (Part No.M5040294358MTR)
from
$97.14
If you’re looking to replace a Ford Ignition lock cylinder, Motorcraft is your best bet for fit and function.
Product Features:
See More
Product Features:
- Performance-tested
- Help provide your customers with reliable performance and long-term durability
- Never reverse-engineered, which helps ensure proper fit and easier installation
Motorcraft – Original Equipment (O.E.) Cylinder Ignition (Part No.SW-6991)
from
$127.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Product Features:
See More
Product Features:
- Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
- Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
- As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Motorcraft – Ignition Lock Cylinder: No Keys Included, Codeable (Part No.SW-6383)
from
$93.99
Motorcraft Original Equipment Products are manufactured of premium-quality materials to strict Ford Engineering standards. Motorcraft Parts are designed and engineered for each application. The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
See More
Carquest Premium – Ignition Lock Cylinder CSA4243 (Part No.CSA4243)
from
$67.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Dorman – Ignition Lock Cylinder: Three Keys Included, OE Fix; With Programming Tool (Part No.989-712)
from
$127.99
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.
Product Features:
See More
Product Features:
- Cost-effective solution – this replacement ignition lock cylinder kit comes with a programmer to save you time and money
- DIY-friendly repair – included programmer easily plugs into the OBD2 port to program the ignition lock to the vehicle
- Complete kit – includes 1 lock, 1 standard key, 2 programmable keys and 1 programming tool
- This part has undergone vehicle try-on testing to ensure conformance to product standards and quality
Popular 2013 Ford F-450 Super Duty Alternators and Starters Categories
2013 Ford F-450 Super Duty Alternators and Starters
You count on your 2013 Ford F-450 Super Duty to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Alternators and Starters. With 26 Alternators and Starters ranging in price from $49.49 to $491.61, you’re sure to find everything you need for your 2013 Ford F-450 Super Duty.
Brands matter. If you want to shop a specific Alternators and Starters brand, we stock 6 different brands like Carquest Premium, Carquest, and Carquest Professional. 2013 Ford F-450 Super Duty Alternators and Starters start as low as $49.49!
One of the best ways to find top quality OEM or aftermarket Alternators and Starters is by asking professionals. Short of that, you can shop with confidence thanks to our 922 extensive product reviews on 2013 Ford F-450 Super Duty Alternators and Starters. Some of the top-rated Alternators and Starters products we carry are Alternator: Remanufactured, 175 Amps with 2.0 stars and Alternator: Remanufactured, 157 Amps with 5.0 stars.
Did we mention you can order your Alternators and Starters from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Alternators and Starters inventory for your 2013 Ford F-450 Super Duty below to get started!
Top-Rated Alternators and Starters Brands For Your 2013 Ford F-450 Super Duty
Trusted Alternators and Starters OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 Ford F-450 Super Duty running right for years to come. In our inventory you’ll find brands like Carquest Premium, Carquest, Carquest Professional, and even more.
Popular Carquest Standard Alternators and Starters
You’ll find popular Carquest Standard brand products across Starter Parts. All are waiting to get your 2013 Ford F-450 Super Duty back on the road. Some of the top-rated Carquest Standard products in these categories are:
Top-Rated Carquest Premium Alternators and Starters
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Alternators and Starters for your 2013 Ford F-450 Super Duty, and some of our most reviewed Carquest Premium parts include:
FAQs for 2013 Ford F-450 Super Duty Alternators and Starters
What are the most purchased Alternators and Starters for the 2013 Ford F-450 Super Duty?
Out of 26 Alternators and Starters for the 2013 Ford F-450 Super Duty, the most popular in our inventory are:
What are the top-rated 2013 Ford F-450 Super Duty Alternators and Starters?
Top-rated Alternators and Starters for your 2013 Ford F-450 Super Duty based on customer reviews/ratings are:
from
$351.99
(2)
Alternator: Remanufactured, 175 Amps
“It is impossible to get through to the 1-877 number. I’ve tried for 3 days and never even received a call back. Advance needs to step it up.”
