2013 Ford F-250 Super Duty Air Suspension and Kits

POWER STEERING FLUID

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

• The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
• The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
• Easy Installation

While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

• Maintains Factory Ride
• Allows For Rear Rake For Towing Or Hauling
• Simple Installation
• Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials
• Actual Lift Varies Depending On Size Of Factory Block Being Removed

RANCHO® Suspension Systems deliver rugged performance for work or play in any on or off-road environment. Rancho® Suspension Systems are fully compatible with other Rancho technologies, including RS9000XL premium shocks, Rancho® RS5000X series shocks and

Product Features:

• Experience the Rancho® difference and uncompromising performance on- and off-road.
• Designed to maintain steering integrity and geometry.
• Check out our website for more information about this system.

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

• Very Best In Quality Performance At An Attractive Price Point
• Allows You To Level Your Vehicle Or Raise It For Extra Tire Clearance
• Maintains Your Vehicles Factory Ride
• Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials
• The Front Axle May Shift 1/2 Inch On Straight Axle Trucks.

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

• Maintains Factory Ride
• Allows For Rear Rake For Towing Or Hauling
• Simple Installation
• Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials
• Actual Lift Varies Depending On Size Of Factory Block Being Removed

Looking to add larger tires or add that go anywhere capability and feel? Then look no further than a TrailFX mid lift suspension kit. Increased ground clearance, visibility, and a smoother ride are all benefits of a mid lift suspension kit. Kits contain all required, ready to install components in one box under one part number.

Product Features:

• Designed For Additional Clearance For Larger Wheel And Tire Combinations
• All Necessary Components Included In One Box
• Maintains Factory Ride
• Shock Replacement Not Required
• X Guard Plus Powertrain Warranty
• Limited Lifetime Warranty and Limited 1 Year Warranty On Wearable Components

Ride Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3200 to 5000 Pounds per set.

Product Features:

• Level The Vehicle Front-To-Rear And Side-To-Side
• Adjustability 5 To 100 PSI
• Stabilize The Vehicle While Loaded
• Maximize Vehicles Load Carrying Capacity
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Daystar Leveling Kits work within the factory suspension design, meaning that we work within the factory design parameters to achieve an increase in ride height that levels the stance of the vehicle. Because we work within the factory design, there are not a bunch additional modifications involved. Everything needed is included in the kit, there is everything you need and nothing you do not. If there are extra items required, such as longer shocks, it is clearly stated in the application description. Torsion bar applications require their own unique approach to leveling the stance of the vehicle. With torsion bar applications, we supply new forged torsion keys that meet or exceed factory specifications. These torsion keys have been re-indexed to increase ride height up to 2 in. and level the stance of the vehicle. In select applications, extended shock brackets are also included. Daystar Leveling Kits include only front lift components to level the stance of the vehicle. We also offer Budget Boost kits, which provide a mild increase in ride height and are more economically priced than our Leveling Kits. Since our start with Leveling Kits in 1995 we have used our expertise to develop over 300 applications that span all of the popular trucks and SUVs…do your homework and you’ll see that we have done ours

Product Features:

• No Metal-On-Metal Contact, Daystar Uses Polyurethane Material In Its Leveling Kits For A Reason, It is An Insulator, Absorbs The Noise, Vibration And Harmonics (NVH) That Come From The Suspension
• Maintains Factory Ride Quality, Daystar Products Work With The Factory Springs With No Preloading Involved, So Vehicle Will Ride Just Like It Did Off The Showroom Floor
• Long Lasting Finish, Polyurethane Is Resistant To The Elements, Road Grime And All Automotive Chemicals, So Comfort Ride Kits Will Look Just Like They Came Out Of The Box For Years To Come
• Top Mount Easy Install Design

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

• Maintains Factory Ride
• Allows For Rear Rake For Towing Or Hauling
• Simple Installation
• Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials
• Actual Lift Varies Depending On Size Of Factory Block Being Removed

The Firestone RED Label(TM) Air Springs are built to extreme specifications found in the most demanding applications. We pioneered the Air Spring industry, and continue to develop the highest quality products that outperform anything else on the market.

Product Features:

• Commercial Grade Bellows
• Designed To Work In Parallel With In-Bed Hitches
• Designed For Performance And Durability
• Easy Installation

Ride Rite All In One Kits, which bundle a Ride Rite air spring kit with a wireless or analog air compressor system for maximum performance and convenience. By combining the Ride Rite air springs with a compressor system you receive all materials needed to complete your air spring system.

Product Features:

• Level The Vehicle Front To Rear And Side To Side
• Adjustability 5 To 100 PSI
• Stabilizes The Vehicle While Loaded
• Maximize Vehicles Load Carrying Capacity

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

• Maintains Factory Ride
• Allows For Rear Rake For Towing Or Hauling
• Simple Installation
• Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials
• Carrier Bearing Spacer included
• Actual Lift Varies Depending On Size Of Factory Block Being Removed

Ride-Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200 to 5,000 Pounds per set.

Product Features:

• Level The Vehicle Front-To-Rear And Side-To-Side
• Adjustability 5 To 100 PSI
• Stabilize The Vehicle While Loaded
• Maximize Vehicles Load Carrying Capacity
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Daystar Leveling Kits work within the factory suspension design, meaning that we work within the factory design parameters to achieve an increase in ride height that levels the stance of the vehicle. Because we work within the factory design, there are not a bunch additional modifications involved. Everything needed is included in the kit, there is everything you need and nothing you do not. If there are extra items required, such as longer shocks, it is clearly stated in the application description. Torsion bar applications require their own unique approach to leveling the stance of the vehicle. With torsion bar applications, we supply new forged torsion keys that meet or exceed factory specifications. These torsion keys have been re-indexed to increase ride height up to 2in. and level the stance of the vehicle. In select applications, extended shock brackets are also included. Daystar Leveling Kits include only front lift components to level the stance of the vehicle. We also offer Budget Boost kits, which provide a mild increase in ride height and are more economically priced than our Leveling Kits. Since our start with Leveling Kits in 1995 we have used our expertise to develop over 300 applications that span all of the popular trucks and SUVs…do your homework and you’ll see that we have done ours

Product Features:

• No Metal-On-Metal Contact, Daystar Uses Polyurethane Material In Its Leveling Kits For A Reason, It is An Insulator, Absorbs The Noise, Vibration And Harmonics (NVH) That Come From The Suspension
• Maintains Factory Ride Quality, Daystar Products Work With The Factory Springs With No Preloading Involved, So Vehicle Will Ride Just Like It Did Off The Showroom Floor
• Long Lasting Finish, Polyurethane Is Resistant To The Elements, Road Grime And All Automotive Chemicals, So Comfort Ride Kits Will Look Just Like They Came Out Of The Box For Years To Come
• Top Mount Easy Install Design

RANCHO® Suspension Systems deliver rugged performance for work or play in any on or off-road environment. Rancho® Suspension Systems are fully compatible with other Rancho technologies, including RS9000XL premium shocks, Rancho® RS5000X series shocks and

Product Features:

• Experience the Rancho® difference and uncompromising performance on- and off-road.
• Designed to maintain steering integrity and geometry.
• Check out our website for more information about this system.

Sport-Rite(TM) airide springs are the answer to all your ride performance needs. These air springs mount between the frame and the suspension, utilizing a state of the Art, OEM, tapered air spring. Sport-Rite kits enhance the ride while empty or loaded. The tapered style air spring will support up to 3,000 Pounds per set.

Product Features:

• Level The Vehicle Front To Rear And Side To Side
• Adjustability 7 To 100 PSI
• Improve The Ride While Loaded
• Stabilize Heavy Loads
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

• Maintains Factory Ride
• Allows For Rear Rake For Towing Or Hauling
• Simple Installation
• Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials
• Actual Lift Varies Depending On Size Of Factory Block Being Removed