2013 Audi A4 Performance Air Intake Kits

This Momentum GT intake system outflows the factory intake by 48%. The one-piece sealed housing includes auxiliary air inlet to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. A urethane plug is also included if you wish to block off the auxiliary air inlet. This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. A custom high temperature reinforced silicone elbow coupling with aluminum fitting is included for easy install to the factory breather line.

Product Features:

• Producing Astonishing 15 hp/13 lbs. x ft. Torque
• Increase Air Flow By 20%
• Unique Air Filter To Housing Interface
• Patented Housing To Filter Interface For Maximum Filtration

Large Five Layer Performance Air Filter: Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 6 IN tall 360-degree radial flow air filter features a 4-1/2″ flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals._x000d_Unique One-Piece Housing: The sealed heat-resistant housing, constructed of XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface and a clear sight window that allows for hassle-free filter inspection. An aluminum heat shield panel on the side of the housing deflects hot air emitted from the turbocharger, ensuring the system’s two air inlets bring in the coolest air possible. In addition to the massive auxiliary air inlet, this intake utilizes the vehicle’s OE air inlet with no additional hardware._x000d_Reinforced Silicone Intake Tube: This intake system utilizes a flexible silicone intake tube that is reinforced with four layers of nylon material, making it virtually resistant to wear and deterioration. It includes a vacuum hose fitting, along with an aluminum insert that easily mates the intake tube to the air filter._x000d_Hassle-Free Installation: Stainless-steel clamps and a silicone inlet trim are included for strength and durability. Momentum GT’s innovative filter-to-housing design minimizes the total number of parts, making for a fast and easy installation._x000d_Fitment Note: This item will only fit models equipped with 45TFSI engine.

Product Features:

• +7 lbs. x ft. TQ & +6 HP
• Outflows Factory Intake by 11%
• Measured Flow: 305 CFM @ 7 IN H2O
• Housing Features Heat-Blocking Aluminum Panel and Two Air Inlets to Draw in Cool Air

K&N 57i Series induction kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adapters are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life. 57i Intakes are not legal for use in California and other US States adopting California emission standards.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

This Momentum GT intake system outflows the factory intake by 48%. The one-piece sealed housing includes auxiliary air inlet to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. A urethane plug is also included if you wish to block off the auxiliary air inlet. This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. A custom high temperature reinforced silicone elbow coupling with aluminum fitting is included for easy install to the factory breather line.

Product Features:

• Producing Astonishing 15 HP/13 ft./lbs. Torque
• Increased Air Flow By 48%
• Unique Air Filter To Housing Interface
• Patented Housing To Filter Interface For Maximum Filtration

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

Large Three Layer Performance Air Filter: Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 6 IN tall 360-degree radial flow air filter features a 4-1/2″ flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals._x000d_Unique One-Piece Housing: The sealed heat-resistant housing, constructed of XPLE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface and a clear sight window that allows for hassle-free filter inspection. An aluminum heat shield panel on the side of the housing deflects hot air emitted from the turbocharger, ensuring the system’s two air inlets bring in the coolest air possible. In addition to the massive auxiliary air inlet, this intake utilizes the vehicle’s OE air inlet with no additional hardware._x000d_Reinforced Silicone Intake Tube: This intake system utilizes a flexible silicone intake tube that is reinforced with four layers of nylon material, making it virtually resistant to wear and deterioration. It includes a vacuum hose fitting, along with an aluminum insert that easily mates the intake tube to the air filter._x000d_Hassle-Free Installation: Stainless-steel clamps and a silicone inlet trim are included for strength and durability. Momentum GT’s innovative filter-to-housing design minimizes the total number of parts, making for a fast and easy installation._x000d_Fitment Note: This item will only fit models equipped with 45TFSI engine.

Product Features:

• +6 lbs. x ft. TQ & +5 HP
• Outflows Factory Intake by 7%
• Measured Flow: 295 CFM @ 7 IN H2O
• Housing Features Heat-Blocking Aluminum Panel and Two Air Inlets to Draw in Cool Air