2012 Ford Mustang Exhaust Parts
More 2012 Ford Mustang Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 2012 Ford Mustang, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 2012 Ford Mustang Exhaust Parts
MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23012)
from
$853.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23012. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2010 Ford Mustang and interchanges with OE parts 8R3Z-5F250-E and 4R3Z-5F250-A, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.81127)
from
$465.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
Walker – Clamp Band, Butt Joint Bolt Dia Length Nut Type Hex Pipe Dia 2.25 (Part No.36529)
from
$41.49
Complete your exhaust repair with the Torca coupler band clamp. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- SUPERIOR SEAL — Provides superior 360° clamping and sealing on muffler inlets, outlets, elbow joints and pipe
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
- PREMIUM MATERIALS – Made from a variety of materials, including low-carbon steel or stainless steel for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing mufflers and exhaust systems for a complete exhaust system upgrade
Walker – Clamp Band, Butt Joint Bolt Dia Length Nut Type Hex Pipe Dia 2.75 (Part No.36531)
from
$44.99
Complete your exhaust repair with the Torca coupler band clamp. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- SUPERIOR SEAL — Provides superior 360° clamping and sealing on muffler inlets, outlets, elbow joints and pipe
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
- PREMIUM MATERIALS – Made from a variety of materials, including low-carbon steel or stainless steel for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing mufflers and exhaust systems for a complete exhaust system upgrade
Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 92424)
from
$9.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10206-01)
from
$12.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75114)
from
$30.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75122)
from
$19.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 10 Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842518)
from
$99.99
Super 10 Series 409S stainless steel – single chamber mufflers. Intended for customers who desire the loudest and most aggressive sound they can find. Because these mufflers are so aggressive, they are recommended only for off highway use and not for street driven vehicles. These mufflers utilize the same patented Delta Flow technology that is found in Flowmaster’s other Super series mufflers to deliver maximum performance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
JBA Performance – 2015 Mustang 5.0 Sil (Part No.1689SJS)
from
$842.99
2015 Mustang 5.0 Sil
JBA Performance – 1650S-2 1 5/8" Header Shorty Stainless Steel 65-73 Mustang 289/302 with GT40 P Cylinder Head (Part No.1650S-2)
from
$632.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1650S-2 1 5/8″ Header Shorty Stainless Steel 65-73 Mustang 289/302 with GT40 P Cylinder Head
- Mandrel bent stainless steel tube
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03414B)
from
$25.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Mount Hardware – M8-1.25mm (Part No.03430)
from
$25.99
Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- Repair kit helps to secure exhaust manifold to the vehicle engine head
- Manufactured to strict engineering quality standards
Dorman – Help – Exhaust Flange Stud Kit – M10-1.5 x 62mm Stainless Steel (Part No.03133HP)
from
$26.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of six M10-1.5 exhaust manifold mounting studs and nuts are 100 percent stainless steel for superior heat and corrosion resistance
- Convenient solution – kit contains all the application-specific hardware necessary to join one exhaust manifold to one manifold flange
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Hanger Length 5.5 (Part No.35755)
from
$17.79
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15630)
from
$771.99
The MagnaFlow 1986-1993 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.0L 1986-1993 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15630 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15630 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
Borla Performance Exhaust – T-304 Ss, 2.5"Pipe Dia, Dual Exhaust With Dual Exit, 4"Dia X 12" L Round (Part No.140067)
from
$1071.99
BORLA(R) experience and advance engineering have produced a S- Type exhaust with outstanding flow numbers that generate great power enhancements. These attributes, coupled with an aggressive sound of power and awesome big tip, proclaim this Stang is all business.
Product Features:
See More
Product Features:
- BORLA(R) Cat-Back(TM) Exhausts Feature, Straight Through And Multi-Core Technology To Unleash Hidden Horsepower
- Each System Is Built From Aircraft Grade High Quality T-304 Stainless Steel
- Ultra Smooth Mandrel Bends Ensure Maximum Flow And Power
- Precision Computer Controlled CNC Manufacturing Ensures An Accurate Fit
- Free-Flow Exhaust Utilizes Patented Award And Race Winning Technology To Deliver Quality, Sound, Performance Gains And Enhanced Fuel Economy
- Easy Bolt-On Installation
- Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds
Walker – Extension Pipe Aluminized 18" (Part No.42835)
from
$31.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
JBA Performance – 1653SH 2.5" Stainless Steel Mid-Pipe H-Pipe for 1653, 351W (Part No.1653SH)
from
$339.99
JBA 409 series stainless steel mid-pipes are the perfect compliment to your JBA Headers or JBA Exhaust system. These systems open up the flow on exhaust systems for a dramatic increase in performance and improved sound. They are available for many popular
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1653SH 2.5″ Stainless Steel Mid-Pipe H-Pipe for 1653, 351W
- O2 sensor provisions where required
Dorman – Exhaust Flange Stud (Part No.H10141184759DOR)
from
$14.44
Exhaust Flange Stud
Walker – 2 Bolt Exhaust Pipe Flange Gasket: Steel, Heat Resistant, Premium Materials (Part No.31741)
from
$15.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Pipe Flange Gasket (Part No.60309)
from
$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Flange (Part No.61792)
from
$35.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dynomax – 55423 Exhaust Intermediate Pipe (Part No.55423)
from
$127.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from stainless steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – 55422 Exhaust Intermediate Pipe (Part No.55422)
from
$127.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from stainless steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Walker – Intermediate Pipe Aluminized 59" (Part No.55552)
from
$80.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
JBA Performance – 6655SH 2.5" Stainless Steel Mid-Pipe H-Pipe for 6655 and 6656, 390/427 (Part No.6655SH)
from
$339.99
JBA 409 series stainless steel mid-pipes are the perfect compliment to your JBA Headers or JBA Exhaust system. These systems open up the flow on exhaust systems for a dramatic increase in performance and improved sound. They are available for many popular
Product Features:
See More
Product Features:
- JBA Performance Exhaust 6655SH 2.5″ Stainless Steel Mid-Pipe H-Pipe for 6655 and 6656, 390/427
- O2 sensor provisions where required
Popular 2012 Ford Mustang Exhaust Parts Categories
2012 Ford Mustang Exhaust Parts
You count on your 2012 Ford Mustang to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 55 Exhaust Parts ranging in price from $8.79 to $3,245.99, you’re sure to find everything you need for your 2012 Ford Mustang.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 12 different brands like Dorman, Walker, and Felpro. 2012 Ford Mustang Exhaust Parts start as low as $8.79!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 76 extensive product reviews on 2012 Ford Mustang Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Competition Series Axle-Back Performance Exhaust System with 4.5 stars and Exhaust Manifold Hardware Kit with 2.5 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2012 Ford Mustang below to get started!
Top-Rated Exhaust Parts Brands For Your 2012 Ford Mustang
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2012 Ford Mustang running right for years to come. In our inventory you’ll find brands like Dorman, Walker, Felpro, and even more.
Popular Walker Exhaust Parts
You’ll find popular Walker brand products across Exhaust Fittings. All are waiting to get your 2012 Ford Mustang back on the road. Some of the top-rated Walker products in these categories are:
Top-Rated Dorman – Help Exhaust Parts
If Dorman – Help are what you’re looking for, our inventory holds plenty. We stock Dorman – Help brand Exhaust Parts for your 2012 Ford Mustang, and some of our most reviewed Dorman – Help parts include:
from
$16.29
(33)
Cap Screw-Hex Head-Grade 8- 1/2-13 x 2-1/2 In.
Exhaust Manifold and Header Hardware
FAQs for 2012 Ford Mustang Exhaust Parts
What are the most purchased Exhaust Parts for the 2012 Ford Mustang?
Out of 55 Exhaust Parts for the 2012 Ford Mustang, the most popular in our inventory are:
from
$99.99
(3)
40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
Mufflers
from
$25.49
This product is not rated
Clamp Band Bolt Dia Length Nut Type Lock Pipe Dia 2.375
Exhaust Clamps
What are the top-rated 2012 Ford Mustang Exhaust Parts?
Top-rated Exhaust Parts for your 2012 Ford Mustang based on customer reviews/ratings are:
from
$25.99
(2)
Exhaust Manifold Hardware Kit
“first time changing radiator.. was not that hard 👍
radiator fit perfectly”
from
$99.99
(1)
Super 10 Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
“The product was perfect and was in excellent condition I love everything about the flowmaster super 10 series ,they sound great and give me the sound ”
