2012 Ford Mustang Exhaust System Kits

Flowmaster introduces our Outlaw Axle-back exhaust system for the 2024-2026 Ford Mustang GT with the 5.0-liter engine or EcoBoost 2.3-liter engine and the factory performance exhaust option. This system uses the Outlaw style mufflers for an aggressive exhaust tone and increased performance. Maximum dyno gains of up to 17 hp and 17 lb-ft were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. Quad 4.00-inch polished stainless steel tips are used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Fits both coupes and convertibles. Backed by Flowmaster’s Limited Warranty.

The MagnaFlow Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.0L Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 3 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19370 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19370 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

The Flowmaster Outlaw Cat-back exhaust system for 2015-2017 Ford Mustang GT with 5.0L engine is perfect for the person looking for a deep and very aggressive sound level inside and outside the car. This bolt-on emissions-legal system features our exclusive dual 3.00-inch Scavenger Series X-pipe for maximum power and a deep unique sound. The stainless steel X-pipe flows into a pair of our race proven Outlaw Series mufflers and exits into dual mandrel-bent 3.00-inch stainless steel tailpipes which are finished off with large 4.00-inch polished stainless steel tips. The system is designed for an easy fit and includes all necessary parts and hardware for an easy installation you can do at home. Covered by our Limited Warranty. Note: Does Not fit convertibles.

With over 400 internal muffler designs based on the technologies shown here, BORLA(R) offers exhaust systems to suit every vehicle, driving style and sound preference. Muffler body shapes, internal core characteristics, flow dynamics and more are tuned and harmonized to maximize performance and pure driving excitement. BORLA(R) ATAK(R) (Acoustically-Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK(R)-equipped exhaust systems deliver the highest available Decibel levels in the BORLA(R) street-legal lineup. And unlike inferior brands that lose significant sound quality at higher volumes, ATAK(R) is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. ATAK(R) technology is based on specifically-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by vehicle basis to deliver the most desirable sound.

Flowmaster introduces our Outlaw Axle-back exhaust system for the 2024-2026 Ford Mustang GT with the 5.0-liter engine or the EcoBoost 2.3-liter engine and the non-valved factory exhaust. This system uses the Outlaw style mufflers for an aggressive exhaust tone and increased performance. Maximum dyno gains of up to 8 hp and 7 lb-ft were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. Dual 4.00-inch black ceramic coated tips are used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Fits both coupes and convertibles. Backed by Flowmaster’s Limited Warranty.

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

The MagnaFlow Ford Mustang Street Series Crossmember-Back Performance Exhaust System brings enhanced engine sound and dyno-proven performance to your 2.8L, 3.3L, 4.3L, 4.7L Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Ford Mustang’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15817 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Flowmaster introduces our Outlaw Axle-back exhaust system for the 2024-2026 Ford Mustang GT with the 5.0-liter engine or EcoBoost 2.3-liter engine and the factory performance exhaust option. This system uses the Outlaw style mufflers for an aggressive exhaust tone and increased performance. Maximum dyno gains of up to 17 hp and 17 lb-ft were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. Quad 4.00-inch black ceramic coated tips are used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Fits both coupes and convertibles. Backed by Flowmaster’s Limited Warranty.

The MagnaFlow Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.8L, 3.9L Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3in. Polished Clamp-On Single Wall Angle Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15717 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15717 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

This Outlaw axle-back exhaust system is specifically designed for 2011-2012 Ford Mustang GT with the 5.0L engine and replaces the original rear mounted mufflers with factory style connections. With easy fit in mind, these 3.00-inch mandrel-bent exhaust systems include a pair of our race-proven Outlaw mufflers for an aggressive exterior and interior sound, and with the maximum amount of power gain possible from an axle-back system. The hangers use the factory locations and the system is finished off with a pair of 4.00-inch polished stainless steel tips embossed with the Flowmaster name. Designed for an quick and easy installation, these systems include all necessary parts, hardware, detailed instructions and are covered by our Lifetime Limited Warranty. Notes: Also fits 2012 Ford Mustang Boss 302 models.

The MagnaFlow Ford Mustang EcoBoost Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This Ford Mustang cat-back exhaust kit is designed to enhance your 2.3L Ford Mustang EcoBoost with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. diameter piping that passes 2 all-new dyno-proven performance chambered mufflers ending in a quad split rear exit with 4in. welded-on double wall angle cut folded edge tips featuring a sporty black chrome finish. The direct-fit design allows for an easy, do-it-yourself installation process. Exhaust system 19640 is engineered to make your Ford Mustang’s engine produce moderate interior and aggressive exterior sound levels, befitting its competition-oriented design. 19640 is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s 1-year limited finish warranty and limited construction warranty. Please check to ensure compliance with local noise regulations.

The MagnaFlow Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.0L Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19100 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19100 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

aFe is proud to introduce our Mach Force-Xp cat-back exhaust systems. In recent testing, this system produced +16 horsepower and +17 lbs. x ft. of torque on our in house dyno. This cat-back exhaust system utilizes 3in into 2-1/2in tubing with a clamp-on reduction tube to fit the stock connections. Remove them and combine with the aFe Power Twisted Steel down-pipes (P/N: 48-33017-HC or 48-33017-HN) for added flow and performance. This system incorporates dual, high-flow mufflers to improve performance across the power band while maintaining an aggressive sound. To finish off the exhaust, dual 4 diameter gloss black 304 stainless steel tips are included. This system includes hardware for a hassle-free installation.

The MagnaFlow Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 5.4L Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15881 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15881 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.