Essential 2012 Ford Fiesta Engine Cooling Parts

from

$14.99

Cracked or lost the original engine coolant reservoir cap- Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$64.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part
Ideal solution – engineered for a seamless installation
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$32.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to ensure proper air/fuel ratio along with proper operation of the cooling fans and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$70.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$94.99

Carquest Premium Thermostat Housings are manufactured with OEM quality materials and safety standards by an OE Supplier. This housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. The construction of this housing is improved over the OE design to fix and update any issues that the OE design may have had.

Product Features:

Easy, one step fit and installation
No special tools required
Meets or exceeds all OEM standards

from

$84.99

This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Additional Notes: Includes gasket

from

$8.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function

from

$8.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$141.99

New Economy Replacement Radiator Support, Bolt-In, Fits Hatchback And Sedan, Matte-Black, 1.6 Liter Engine, Made Of Glass Fiber Reinforced Pp Plastic

Product Features:

Bolt-In, Fits Hatchback And Sedan, Matte-Black, 1.6 Liter Engine, Made Of Glass Fiber Reinforced Pp Plastic, Made Of Polypropelene & Glass fiber
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$165.99

New CAPA Certified Premium Replacement Radiator Support, Bolt-In, Fits Hatchback And Sedan, Matte-Black, 1.6 Liter Engine, Made Of Glass Fiber Reinforced Pp Plastic

Product Features:

Bolt-In, Fits Hatchback And Sedan, Matte-Black, 1.6 Liter Engine, Made Of Glass Fiber Reinforced Pp Plastic, Made Of Polypropelene & Glass fiber
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$108.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Rapid-Cool Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan
Motors built and tested to quality specifications
12 in. universal fit reversible fan
800 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$72.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Rapid-Cool Thin-Line electric fans
10″ Diameter
650 CFM
Use as a pusher or puller fan
Motors built and tested to quality specifications
10 in. universal fit reversible fan
650 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$57.99

This replacement engine coolant water outlet is engineered to match the fit and durability of the stock engine coolant water outlet on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant water outlet directly replaces the original water outlet on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement water outlets

from

$52.99

Ideal replacement – this engine coolant water outlet directly replaces the original water outlet on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement water outlets

from

$74.99

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$14.99

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$8.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$129.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
Complete package – assembly is designed with the same materials and components as the original part
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$26.99

Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function

from

$96.99

New Platinum Pro Radiator, 1.6 Liter L4 Engine Without Turbo

Product Features:

1.6 Liter L4 Engine Without Turbo, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: 5 Year, Limited
Radiator Cap Not Included
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$219.99

Carquest Premium Radiators offer one of the largest product ranges in the aftermarket, covering more than 95% of the popular automotive and light truck applications. Carquest Premium Radiators meet or exceed original equipment specifications, ensuring that products fit and perform just as well or better than the original parts, providing you peace of mind.

Product Features:

Our B-type tubes feature central reinforcement to provide greater tolerance to pressure. Stronger tube design means drastically reduced probability of tube failure.
Our deep extrusion header provides a stronger tube to header joint which is more resistant to the effects of vibration and thermal tube expansion, virtually eliminating tube to header leaks.
Our fin edges are folded for increased stability and heat disbursement properties.
Our included “multi-fit” attachments allow one radiator to cover multiple vehicle applications without sacrificing OE fit. This results in wider vehicle coverage with substantially less inventory.
Thermal expansion cuts allow for longer life and reduce failure rates by allowing improved core expansion and contraction during normal heat cycles.
We design and manufacture all our radiators to meet or even exceed Original Equipment specifications. We take pride in producing the most reliable replacement parts in the market.
We use longer header tabs for increased pressure resistance. This reduces the potential for tank to header leaks.

from

$205.99

Our B-type tubes feature central reinforcement to provide greater tolerance to pressure. Stronger tube design means drastically reduced probability of tube failure.
Our deep extrusion header provides a stronger tube to header joint which is more resistant to the effects of vibration and thermal tube expansion, virtually eliminating tube to header leaks.
Our fin edges are folded for increased stability and heat disbursement properties.
Our included “multi-fit” attachments allow one radiator to cover multiple vehicle applications without sacrificing OE fit. This results in wider vehicle coverage with substantially less inventory.
Thermal expansion cuts allow for longer life and reduce failure rates by allowing improved core expansion and contraction during normal heat cycles.
We design and manufacture all our radiators to meet or even exceed Original Equipment specifications. We take pride in producing the most reliable replacement parts in the market.
We use longer header tabs for increased pressure resistance. This reduces the potential for tank to header leaks.

from

$25.49

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

FAQs for 2012 Ford Fiesta Engine Cooling Parts

What are the best-selling Engine Cooling Parts for 2012 Ford Fiestas?

Out of 27 Engine Cooling Parts that fit 2012 Ford Fiestas, the following parts are the top sellers:

Electric Fan, 10" Diameter (6016898) – $72.99
Engine Coolant Reservoir Cap (10006766) – $22.99
Coolant Temperature Sensor 1TS1006 (12422758) – $31.99

What’s the price range for 2012 Ford Fiesta Engine Cooling Parts?

The prices of Engine Cooling Parts for the 2012 Ford Fiesta range from $4.99 up to $205.99 for the most premium parts.

What is the average price of an Engine Cooling Part for a 2012 Ford Fiesta?

The average price for Engine Cooling Parts for the 2012 Ford Fiesta is $68.64. Keep in mind the variety of part types within our Engine Cooling Part category, where you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Cooling Parts for other Ford Fiesta model years?

Yes, we carry Engine Cooling Parts for 10 model years of Ford Fiestas between 1978 and 2019. The following model years are the most popular for Engine Cooling Part purchases: 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2011, and 1980.

What are the cheapest Engine Cooling Parts for my 2012 Ford Fiesta?

The cheapest 2012 Ford Fiesta Engine Cooling Parts we carry are:

Expansion Tank Cap (50184730) – $4.99
Engine Water Pump Gasket (11469103) – $8.99
Engine Coolant Thermostat Gasket (11453799) – $8.99
Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (11161815) – $14.99
Engine Coolant Reservoir Cap (10006766) – $22.99

Does Advance Auto Parts sell Engine Cooling Parts for any other 2012 Ford models?

Yes. We stock Engine Cooling Parts for 22 other popular 2012 Ford models. Some of the most popular are 2012 F-150 Engine Cooling Parts, 2012 Mustang Engine Cooling Parts, 2012 Explorer Engine Cooling Parts, 2012 F-250 Super Duty Engine Cooling Parts, and 2012 F-350 Super Duty Engine Cooling Parts.

What are the top-rated Engine Cooling Parts that fit the 2012 Ford Fiesta?

Based on 612 reviews by customers, our 2012 Ford Fiesta Engine Cooling Parts have an average customer rating of 4 stars. These are the highest-rated categories of Engine Cooling Parts for the 2012 Ford Fiesta and their top-rated products:

Coolant Reservoirs
- Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (10858502) – $64.99
Engine Cooling Fans
- Radiator Fan Assembly: Single, Cost Effective and Reliable (10572904) – $129.99

What types of Engine Cooling Parts do you sell for my 2012 Ford Fiesta?

As of 3/1/26, these are some of the most in-demand types of Engine Cooling Parts for a 2012 Ford Fiesta:

Can I get help with 2012 Ford Fiesta Engine Cooling Part orders?

Contact our customer support team by chat or phone, through the help desk page, where you can find instant answers about Ford Engine Cooling Parts and more.

What is your return policy for Ford Fiesta Engine Cooling Parts?

Advance Auto Parts keeps returns simple. For new Ford Fiesta Engine Cooling Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Ford Fiesta Engine Cooling Parts

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54211)

Dorman – Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-381)

NTK – Engine Coolant Temperature Sensor (Part No.EF0106)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Carquest Premium – Coolant Housing/Water Outlet: With Seal (Part No.CH2172)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2332)

Felpro – Engine Coolant Outlet Gasket (Part No.36043)

Felpro – Engine Coolant Thermostat Gasket (Part No.36041)

KAI – Radiator Support (Part No.FO1225202V)

KAI – Radiator Support (Part No.FO1225202PP)

Imperial – Electric Fan, 12" Diameter (Part No.226112)

Imperial – Electric Fan, 10" Diameter (Part No.226110)

Dorman – Engine Coolant Water Outlet (Part No.902-230)

Dorman – Engine Coolant Water Outlet (Part No.902-1084)

Dorman – Thermostat Assembly: Includes Housing, Thermostat, and 2 Gaskets, 194 Degrees (Part No.902-1100)

Motorad UltraStats – UltraStat Thermostat: 180 Degrees (Part No.5200-180)

Felpro – Engine Water Pump Gasket (Part No.36037)

Dorman – Radiator Fan Assembly: Single, Cost Effective and Reliable (Part No.621-503)

Felpro – Engine Coolant Outlet Gasket (Part No.36039)

KAI – Radiator (Part No.RAD13201)

Carquest Premium – Radiator (Part No.813430)

Carquest Premium – Radiator (Part No.813201)

Carquest Premium – Multi-Use Connector (Part No.PTA2725)

Felpro – Engine Coolant Thermostat Gasket (Part No.36041)

Felpro – Engine Water Pump Gasket (Part No.36037)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2332)

Motorad – Standard Thermostat: With Seal, 180 Degrees (Part No.737-180)

Carquest Premium – Radiator (Part No.813201)

KAI – Radiator (Part No.RAD13201)