2012 Ford F-250 Super Duty Drivetrains

Essential 2012 Ford F-250 Super Duty Drivetrains

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1410 U/Joint Size (Part No.41030)

Replacement Yoke For Dana 60 And 70 With A 1410 U/Joint Size

from

$278.99
Yukon replacement yoke for Dana 60 and 70 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 1410 u-joint size
  • 4.188″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Motorcraft – 4WD Indicator Lamp S (Part No.J7609673890MTR)

4WD Indicator Lamp S

from

$37.78
4WD Indicator Lamp S

Yukon Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.32042)

Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down

from

$414.99
Yukon Performance steel spool for Dana 60 with 35 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler Dana Spicer 60 with 35 spline axles
  • 4.10 and down ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Felpro – Differential Cover Gasket (Part No.RDS 55394)

Differential Cover Gasket

from

$9.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – 1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet) (Part No.41199)

1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet)

from

$15.99
1330 U/joint U-bolts, 5/16″ X 1-9/16″, (7260 & 7290 BILLET).

Product Features:
  • u-joint u-bolt kit
  • Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
  • 1330 u-joint size
  • Includes two u-bolts and four nuts
See More

Yukon Gear – Grizzly Locker For Dana 60, 4.56 & Up, 35 Spline (Part No.28005)

Grizzly Locker For Dana 60, 4.56 & Up, 35 Spline

from

$1050.00
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 35 spline axles
  • 4.56 and up ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

National – Multi Purpose Seal (Part No.710653)

Multi Purpose Seal

from

$20.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Timken – Axle Shaft Seal (Part No.K4021473864TIM)

Axle Shaft Seal

from

$45.90
Timken understands how important seals are in the automotive industry. Leveraging our knowledge and experience with bearings, we offer a broad line of light-duty oil seals made exclusively for Timken in some of the world’s most advanced manufacturing plants.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

1310 U/Joint With Zerk Fitting On Cross

from

$44.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More

Motorcraft – 4WD Actuator Valve (Part No.J7603674059MTR)

4WD Actuator Valve

from

$69.89
4WD Actuator Valve

Yukon Gear – Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles (Part No.16088)

Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles

from

$659.99
Yukon replacement positraction internals for Dana 60 (full- and semi-floating) with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Dana Spicer 60 with Trac Loc positraction with 35 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Drive Flange Cap For Dana 60 (Part No.32132)

Drive Flange Cap For Dana 60

from

$129.99
Product Features:
  • Drive flange cap
  • Fits Dana 60
See More

Dorman – 4WD Differential Switch (Part No.600-402)

4WD Differential Switch

from

$73.99
This 4WD hub locking solenoid directly replaces the original equipment solenoid on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this 4WD hub locking solenoid matches the fit and function of the stock solenoid on certain vehicle applications
  • Effective fix – restores control of 4WD system impacted by failed original solenoid
  • Thoroughly tested – on-vehicle and laboratory testing ensures trouble-free operation
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-88542)

Tapered Roller Bearing

from

$16.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – AxleHubBolt (Part No.33587)

AxleHubBolt

from

$7.99
AxleHubBolt

Pro-King – Differential Pinion Nut (Part No.764A961)

Differential Pinion Nut

from

$5.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)

Differential Pinion Solid Spacer Kit w/Shims

from

$22.79


Product Features:
  • FORD 9″ SOLID SPACER KIT
See More

Yukon Gear – Super Carrier Shim Kit For Ford 10.25" (Part No.55004)

Super Carrier Shim Kit For Ford 10.25"

from

$48.99
10.25″ Ford carrier Supershims.

Product Features:
  • Super carrier shim kit for Ford 10.25″ and 10.5″
  • Interlocking design makes installation much easier
See More

Driveworks – Needle Bearing (Part No.S-B-2110)

Needle Bearing

from

$7.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – 10.6" Ford Outer Slinger (Part No.33199)

10.6" Ford Outer Slinger

from

$10.99
Yukon 1541H alloy rear axle for ’88-’97 GM 7.5″ S10 2WD (non-ABS) with a length of 26-7/8 inches and 28 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year war

Product Features:
  • Outer slinger
  • Fits 2011 and up Ford 10.5″
See More

USA Standard Gear – Master Overhaul Kit for 2011 & Up Ford 10.5" Differentials Using OEM Ring & Pinion. (Part No.37100)

Master Overhaul Kit for 2011 & Up Ford 10.5" Differentials Using OEM Ring & Pinion.

from

$639.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket. .

Product Features:
  • Fits 2011 and up Ford 10.5″ housing with OEM ring and pinion set
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Zip Locker Soleniod Valve (Part No.34014)

Zip Locker Soleniod Valve

from

$99.99
Zip Locker soleniod valve.

Product Features:
  • Solenoid valve
See More

Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)

Dana 60, Dana 70, And Dana 80 Strap Kit

from

$31.99
Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.

Product Features:
  • u-joint strap kit
  • Fits Dana Spicer 60, 70, 70U, 70HD and 80
  • 1480 u-joint size
  • Includes two straps and four bolts
See More

Motive Gear – Differential Pinion Seal (Part No.6808N)

Differential Pinion Seal

from

$24.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Yukon Gear – Set Up Bearing (Part No.56038)

Set Up Bearing

from

$276.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 50. JLM104948. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 50
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

Spartan – Drive Axle Assembly; Ford F-250/350 05-07 Axle (Part No.RAX2246A)

Drive Axle Assembly; Ford F-250/350 05-07 Axle

from

$2294.99
Remanufactured Rear Axle assemblies are completely disassembled and thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed and include backing plates, axle shafts and fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Spicer – Universal Joint (Part No.SPL55-3X)

Universal Joint

from

$81.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Popular 2012 Ford F-250 Super Duty Drivetrains Categories

2012 Ford F-250 Super Duty Drivetrains

You count on your 2012 Ford F-250 Super Duty to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 335 Drivetrains ranging in price from $2.99 to $2,864.99, you’re sure to find everything you need for your 2012 Ford F-250 Super Duty.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 23 different brands like Valvoline, Moog, and Spicer. 2012 Ford F-250 Super Duty Drivetrains start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 7,116 extensive product reviews on 2012 Ford F-250 Super Duty Drivetrains. Some of the top-rated Drivetrains products we carry are Solenoid, 4WD Engage And Emissions Purge with 4.1 stars and Greaseable Premium Universal Joint with 4.0 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2012 Ford F-250 Super Duty below to get started!

Top-Rated Drivetrains Brands For Your 2012 Ford F-250 Super Duty

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2012 Ford F-250 Super Duty running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Spicer, and even more.

Popular Felpro Drivetrains

You’ll find popular Felpro brand products across Differentials. All are waiting to get your 2012 Ford F-250 Super Duty back on the road. Some of the top-rated Felpro products in these categories are:
Differential Cover Gasket
from $9.49
(26)
Differential Cover Gasket
Rear Housing Cover Gaskets

FAQs for 2012 Ford F-250 Super Duty Drivetrains

What are the most purchased Drivetrains for the 2012 Ford F-250 Super Duty?

Out of 335 Drivetrains for the 2012 Ford F-250 Super Duty, the most popular in our inventory are:
Greaseable Super Strength Universal Joint
from $55.99
(39)
Greaseable Super Strength Universal Joint
U-Joints
Greaseable Super Strength Universal Joint
from $36.99
(41)
Greaseable Super Strength Universal Joint
U-Joints
Greaseable Premium Universal Joint
from $59.99
(25)
Greaseable Premium Universal Joint
U-Joints

What are the top-rated 2012 Ford F-250 Super Duty Drivetrains?

Top-rated Drivetrains for your 2012 Ford F-250 Super Duty based on customer reviews/ratings are:
Solenoid, 4WD Engage And Emissions Purge
from $45.49
(40)
Solenoid, 4WD Engage And Emissions Purge
“Replaced and solenoid with this item exact fit with rain hat works great!!”
Greaseable Premium Universal Joint
from $19.99
(31)
Greaseable Premium Universal Joint
“Greaseable with life time warranty”
Greaseable Premium Universal Joint
from $28.99
(20)
Greaseable Premium Universal Joint
“Fit perfect no issues”