2011 Lincoln Navigator Car Parts & Accessories

The original equipment window regulator fails when the plastic window slide block fatigues and cracks. This Dorman OE FIX replacement motor and regulator assembly incorporates a redesigned slide block for significantly greater durability.

Product Features:

• Improved replacement – this motor and regulator assembly features enhancements over the original design for greater reliability
• Failure-resistant design – incorporates redesigned window slide block for significantly greater durability than the original equipment design
• Simple replacement – no special tools are required to install this regulator assembly
• Quality engineering – this part was redesigned for greater durability using finite element analysis, in-door cycle testing and proprietary slide block compression testing

The original equipment window regulator fails when the plastic window slide block fatigues and cracks. This Dorman OE FIX replacement motor and regulator assembly incorporates a redesigned slide block for significantly greater durability.

Product Features:

• Improved replacement – this motor and regulator assembly features enhancements over the original design for greater reliability
• Failure-resistant design – incorporates redesigned window slide block for significantly greater durability than the original equipment design
• Simple replacement – no special tools are required to install this regulator assembly
• Quality engineering – this part was redesigned for greater durability using finite element analysis, in-door cycle testing and proprietary slide block compression testing

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

Need a new third brake light assembly that looks, fits and performs like the original, without the hassle of going back to the dealership? This replacement was reverse-engineered to match the stock center high mount stop light on specific vehicles.

Product Features:

• Ideal replacement – this third brake light assembly was specifically designed to look and function like the original light on specific vehicles
• Quality construction – made from quality materials for excellent visibility and illumination
• Trustworthy design – backed by team of engineers and specialists in the United States
• Thoroughly tested – this part has undergone extensive testing to help ensure a secure fit and long service life

This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.

Product Features:

• Direct replacement – this body mount fits and functions like the original equipment mount
• Quality construction – manufactured from premium materials for a long service life
• Excellent value – original equipment quality at a lower price
• Quality tested – has undergone testing to ensure proper fit and performance

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
• Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

This body mount nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this body mount nut matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This trunk lid release switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this trunk lid release switch is made to match the fit and performance of the original switch on specific vehicle applications
• Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

This replacement liftgate glass hinge matches the fit, function and appearance of the original equipment hinge on specific vehicle applications. Made of quality materials, this hinge is designed for a reliable service life.

Product Features:

• Ideal replacement – this liftgate glass hinge directly replaces the original equipment hinge on specific vehicles
• Durable construction – this hinge is made of quality materials to match the original equipment finish
• Cost-effective solution – offers original equipment quality at competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

• The Motorcraft Interior Lamp Switch Assembly is the spring-loaded plunger design electrical switch that is mounted in the vehicle door frame and operates the on/off function of the interior -courtesy light- when the door is opened or closed.
• Motorcraft Interior Lamp Switch Assembly is engineered and manufactured to exact Ford OE specifications to ensure O.E. quality and performance.
• As with all Motorcraft after market parts, any engineering innovations or product improvements that have been developed since the vehicle’s assembly are added to the Interior Lamp Switch Assembly, ensuring the most current technology.

The original equipment window regulator fails when the plastic window slide block fatigues and cracks. This Dorman OE FIX replacement motor and regulator assembly incorporates a redesigned slide block for significantly greater durability.

Product Features:

• Improved replacement – this motor and regulator assembly features enhancements over the original design for greater reliability
• Failure-resistant design – incorporates redesigned window slide block for significantly greater durability than the original equipment design
• Simple replacement – no special tools are required to install this regulator assembly
• Quality engineering – this part was redesigned for greater durability using finite element analysis, in-door cycle testing and proprietary slide block compression testing

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Convenient pack – this value pack includes the left and right door lock actuator motors for certain popular vehicle applications
• Perfect fit – engineered to provide the same fit and function of the original equipment actuator motors
• Safety compliant – parts have undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

New Standard Replacement Driver Side Front Interior Door Handle, Chrome

Product Features:

• Chrome, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The original equipment window regulator fails when the plastic window slide block fatigues and cracks. This Dorman OE FIX replacement motor and regulator assembly incorporates a redesigned slide block for significantly greater durability.

Product Features:

• Improved replacement – this motor and regulator assembly features enhancements over the original design for greater reliability
• Failure-resistant design – incorporates redesigned window slide block for significantly greater durability than the original equipment design
• Simple replacement – no special tools are required to install this regulator assembly
• Quality engineering – this part was redesigned for greater durability using finite element analysis, in-door cycle testing and proprietary slide block compression testing

Motorcraft window regulators and regulator assemblies are designed to provide perfect fit and easier, faster installation. They also include the latest innovations and engineering upgrades.

Product Features:

• Pre-lubricated for quiet operation
• Attachment points line up with the vehicle door and glass holes, providing a quality installation
• To help ensure smooth travel and optimal window speeds, regulator and glass paths are matched
• Durability tested

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 10″ x 15-7/8″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
• Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
• A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
• Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

• Imperial Maxi-Cool® plate and fin transmission cooler
• Size: 3/4″ x 11″ x 7-1/2″
• Mid-size and full-size cars, pickups
• GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

• Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
• Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
• Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
• Versatile component – this connector can be used in a variety of repairs and custom installations

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Product Features:

• Class “A” motor homes, large travel trailers, 5th-wheel trailers
• GVWR up to 30,000 lbs.; towing up to 10,000 lbs.

Product Features:

• Imperial Econo-Kool« tube and fin transmission cooler
• Size: 3/4″ x 10″ x 15-7/8″
• Class “A” motor homes, large travel trailers, 5th-wheel trailers
• GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Product Features:

• Imperial Rapid-Cool« plate and fin transmission cooler
• Size: 3/4″ x 11″ x 9-1/2″
• Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
• GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
• 33% more efficient than a comparable tube and fin design

Product Features:

• Mid-size and full-size cars, pickups
• GVWR up to 18,000 lbs.; towing up to 3,500 lbs
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 15-7/8″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Crowned raceways and rollers to ensure even load distribution for maximum life
• Industry leading coverage
• Professional technicians know they can depend on National

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Crowned raceways and rollers to ensure even load distribution for maximum life
• Industry leading coverage
• Professional technicians know they can depend on National

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Controlled heat treating process for lasting performance and extended bearing life
• Industry leading coverage
• Professional technicians know they can depend on National

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

• Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
• Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on testing to ensure a quality fit

Product Features:

• Transmission line fitting kit
• Ford; 5/8″-18 inverted flare, deep thread
• Helps simplify transmission cooler installation
• Allows for auxiliary transmission cooler installation without cutting OE lines
• Crafted from high-quality material that makes it durable and longer-lasting
• A high quality, direct fit OE replacement
• Easily connects the transmission cooler line to the cooler hose
• Hose clamps required

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

When the transmission linkage clips break on many Ford, Lincoln and Mercury vehicles, you usually have to replace the entire shifter cable assembly. This Dorman OE FIX clip allows direct replacement of only the failed original clip, saving money.

Product Features:

• Smart fix – this direct replacement shift linkage clip saves time and money by directly replacing the failure-prone clip on many Ford, Lincoln and Mercury vehicles
• Effective alternative – allows you to restore shifter mechanism operation without replacing the entire shifter cable assembly
• Application specific – made for certain Ford, Lincoln and Mercury vehicles
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 90 minutes

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 12-1/2″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

This automatic transmission valve body sealing sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this automatic transmission valve body sealing sleeve is designed to match the fit and function of the original sleeve on specified vehicles
• Restores functionality – reliable replacement for a missing part that has failed due to plastic cracks and O-ring leaks
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Product Features:

• Brand may vary by location

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:

• Balanced to factory specs
• Fit and function like the original parts
• Restores normal operation

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

• For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
• The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
• Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
• Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
• Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. that is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating.

Product Features:

• Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
• Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter For Increased Strength And Improved Flywheel Register
• High Performance Series Is Rated
• Increased Strength
• 1-PC Rear Main Seal
• M10 X 1.0 Thread Size

Lower Radiator Hose Heater

The Rightline Gear Sport 3 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 3 is one of the largest car top bags on the market.

Product Features:

• Capacity: 18 cu ft
• Dimensions: 48″ L x 36″ W x 18″ H
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Enclosed front end helps fit your gear to the size of the carrier and prevents overfilling.
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

AVS In-Channel Ventvisor® offers a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle. AVS; the creator of the side window deflector category, lets fresh air in while keeping rain out. The best exterior window protection with a large selection of window deflectors and for cars, trucks, SUV’s and CUV’s.

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved low-profile design
• Installs in the window channel for a sleek, aerodynamic appearance
• Made from durable, impact-resistant acrylic
• Available in dark smoke finish

The Rightline Gear Sport 2 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 2 is a popular size for many travelers.

Product Features:

• Capacity: 15 cu ft
• Dimensions: 42″ L x 34″ W x 18″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

Autocraft Easy Fit SUV cover offers superior protection for your vehicles. The fabric which is soft, breathable and with water repellent coating does not only prevent your vehicles from scratching but also protect against mold and mildew. It designed with full elastic, double stitched hem, reinforced grommets and rope to ensure a better and secure fit. Bag included for convenient storage.

Product Features:

• Fit SUVs 15′-19′ (4.5m-5.8m)
• Lightweight, breathable, non-abrasive fabric
• Water repellent coating, protects against mold and mildew
• Full elastic and double stitched hem to ensure a better fit
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to provide additional protection from water or dust soak into the hole that you cut for antenna to pass through
• Bag included for easy storage

Need a new key fob? This DIY keyless remote is designed to match the appearance and function of the original on specific vehicle years, makes, models and configurations. With easy-to-follow instructions, you can program it yourself in minutes, and rely on it for years.

Product Features:

• Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
• Do-it-yourself solution – follow the simple onboard programming procedure in the included instructions to set up your new fob in minutes
• Durable construction – made from quality, drop-resistant components to ensure reliable performance and long service life
• Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

• Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
• Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
• Reliable construction – keeps moisture and debris out of internal electronics for long service life
• Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

The name says it all – the Universal Car Remote works like a universal TV remote, but it’s made for cars. It’s designed to work with factory-installed keyless entry systems. It works exactly like a vehicle’s original factory remote, unlocking and locking doors, popping open the trunk – everything an original remote does. The Universal Car Remote has the capabilities of 216 remotes packed into a single device. It replaces factory original remotes for vehicles made by 21 car manufacturers – from Buick to Volkswagen. For the first time ever, you can replace remotes using a single device.

Product Features:

• Introducing world’s first and only universal car remote.
• The Universal Car Remote has the capabilities of 216 remotes packed into a single device
• It replaces factory original remotes for vehicles made by 21 car manufacturers – from Buick to Volkswagen
• Freshly installed battery included

Autocraft Easy Fit SUV cover offers excellent protection for your vehicles. 3 layers construction includes reflective UV resistant layer, water resistant layer and non-abrasive soft inside layer. The construction does not only prevent your vehicles from scratching but also protects against mold and mildew. Suitable for indoor and outdoor use. It designed with a full elastic, ultrasonic sewn hem and reinforced grommets to ensure a better fit and extreme durability. Bag included for convient storage.

Product Features:

• Fit SUVs 15′-19′ (4.5m-5.8m)
• Medium weight, breathable, non-abrasive fabric for indoor and outdoor use
• Water resistant layer, protects against mold and mildew
• UV treatment protects vehicle from sun damage
• Full elastic and ultrasonic sewn hem to ensure a better fit and extreme durability
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to provide additional protection from water or dust soaking into the hole that you cut for antenna
• Bag included for easy storage

The Rightline Gear Car Back Carrier is a patented cargo bag that attaches to the rear of your vehicle, WITH or WITHOUT a roof rack. The perfect solution for those who engage in paddle sports, snow sports, or cycling. Keep your gear on the roof and your cargo on the back! The location of the Carrier allows for easy access and also shields it from the wind, saving you $$$ at the gas pump. The Carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The bottom pole frame provides structural support for the cargo in the bag. The Rear Car Clips attach the Car Back Carrier to the rear hatch door on vehicles without a roof rack.

Product Features:

• Capacity: 13 cu ft
• Dimensions: 40″ L x 20″ W x 28″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% Waterproof with welded seams and a urethane coated zipper
• Includes: carrier, bottom pole frame, (2) Rear Car Clips, (1) 2″ W belt strap, (2) 1″ W bottom straps, and stuff sack with sewn-in set up guide
• PVC Mesh (polyester re-enforced PVC) and Hydrotuff Material (PVC-backed polyester), UV resistant
• Attaches to SUVs, minivans, and crossovers WITH a roof rack (either side rails or cross bars)
• Attaches to SUVs, minivans, and crossovers WITH a roof rack (either side rails or cross bars)
• Install on vehicles WITHOUT a roof rack with Cargo Saddlebag Car Clips (purchased separately)
• Bottom pole frame provides structure and rigidity for the bag
• Includes: Cargo Saddlebag, bottom pole frame, (1) 2″ W belt strap, (2) 1″ W bottom straps, stuff sack, and sewn-in set up guide

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

• Capacity: 10 cu ft
• Dimensions: 36″ L x 30″ W x 16″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

The Range 3 Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

• Capacity: 18 cu ft
• Dimensions: 48″ L x 36″ W x 18″ H
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

• Saves wear and tear on your engine
• Simple installation directly into engine block

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

• Securely mounts above the window on the door
• Precision engineered for a perfect fit to your vehicle
• Available in impact-resistant acrylic with a smoke finish
• Made in USA
• Car-wash safe

Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

• Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
• Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
• Reliable construction – keeps moisture and debris out of internal electronics for long service life
• Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

• Securely mounts above the window on the door
• Precision engineered for a perfect fit to your vehicle
• Available in impact-resistant acrylic with a smoke finish
• Made in USA
• Car-wash safe

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicle interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

• Interior Protection From All Types Of Wear And Tear
• Custom Molded Specifically For Your Vehicle
• High Outside Lip That Helps Contain Spills
• Quick And Easy Cleanup
• A Skid-Resistant Surface
• Protects And Preserves The Cargo Area And Trunk Carpet
• Toughness And Durability
• Easy Installation

WeatherTech Side Window Deflectors, offer fresh air enjoyment with an original equipment look, installing within the window channel.  They are crafted from the finest 3 Millimeter acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors are precision-machined to perfectly fit your vehicle window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. (U.S. Department of Transportation) approved glazing material. Available in light and dark tint for most vehicles.

Product Features:

• Offers Maximum Fresh Air Enjoyment
• Optically Transparent OEM Quality
• Sleek Aerodynamic Styling
• Reduced Wind Noise
• No Unsightly Exterior Tape
• Minimizes Interior Heat When Parked Helps Keep Side Windows Dry In The Rain
• Precision Machined To Perfectly Fit Your Vehicle
• Installed Inside The Window Channel

The Range Jr Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

• Dimensions: 36″ L x 32″ W x 15″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• Weatherproof + with welded seams and a urethane coated zipper
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

• Interior Protection From All Types Of Wear And Tear
• Custom Molded Specifically For Your Vehicle
• High Outside Lip That Helps Contain Spills
• Quick And Easy Cleanup
• A Skid-Resistant Surface
• Protects And Preserves The Cargo Area And Trunk Carpet
• Toughness And Durability
• Easy Installation

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

• Interior Protection From All Types Of Wear And Tear
• Custom Molded Specifically For Your Vehicle
• High Outside Lip That Helps Contain Spills
• Quick And Easy Cleanup
• A Skid-Resistant Surface
• Protects And Preserves The Cargo Area And Trunk Carpet
• Toughness And Durability
• Easy Installation

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

This air bag clockspring matches the fit of an original that is missing or damaged and is designed to restore current to the air bag, horn, and steering wheel-mounted controls on specified vehicles.

Product Features:

• Direct replacement – reverse-engineered to match the original clockspring on specific vehicles
• Ideal solution – engineered to ensure proper restoration of air bag system performance
• Durable construction – designed, manufactured and tested to strict specifications for reliable service
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Heated Seat Module C

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

Seat Switch

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family

Carhartt Mossy Oak Camo SeatSaver seat covers from Covercraft keep the seats in your truck or SUV clean and protected from daily use and weekend adventures while sporting the famous Mossy Oak Break-Up Country camouflage. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment, classic Carhartt styling and the most popular camouflage available, you get seat covers that look great and protect your seats from whatever abuse you can dish out.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Famous Mossy Oak Break up Country camouflage
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Carhartt SeatSaver seat covers from Covercraft are the solution to the problem of keeping the seats in your truck or SUV clean and protected from daily use and weekend adventures. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and classic Carhartt styling, you get seat covers that look great and protect your seats from whatever you throw at them.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Carhartt SeatSaver seat covers from Covercraft are the solution to the problem of keeping the seats in your truck or SUV clean and protected from daily use and weekend adventures. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and classic Carhartt styling, you get seat covers that look great and protect your seats from whatever you throw at them.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Heated seats not working properly? The seat heater control module on certain Ford and Lincoln vehicles can be damaged from moisture and burn out over time, preventing the heated seats from operating properly. When that happens, if you try get a replacement from the dealership, you often have to buy the module and required pigtail connector separately. This complete kit includes both the module and the connector for a convenient, money-saving, reliable repair solution.

Product Features:

• Convenient solution – this cost-effective seat heater control module with pigtail kit includes a replacement module and pigtail, saving hassle and expense of buying the two components separately from the dealer
• Restores functionality – when the original ground pin or pigtail connector fails, this direct replacement kit restores the comfort and convenience of heated seats to original standards
• Seamless replacement – module designed and tested to work exactly like the factory components for millions of select Ford and Lincoln vehicles
• Trustworthy quality – backed by a team of electrical engineers and product experts in the United States and more than a century of automotive experience

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

The Accelerator Pedal Position (APP) sensor provides a signal identifying the location of the accelerator pedal to the engine control module. As the vehicle operator requests various degrees of torque from the engine the signal from the sensor provides the engine computer the necessary information to implement the request. The sensor provides two positive slope signals that have an offset voltage range and increase at different rates, the two signals from the sensor provide the engine computer with two unique signal inputs ensuring safety should one signal fail.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Seat Switch

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners