from

$21.99

Shock Absorber

from

$39.99

Shock Absorber

from

$72.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$409.99

MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.

Product Features:

Increased Spark Energy Over The Entire RPM Range Of The Engine
Coils Bolt In Place Of The Factory Units
Accepts OEM Connections For A Simpler Installation

from

$991.99

MSD ignition’s Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connectors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance. There are two types of housings for the MSD coils. Check your application for the visual match.

Product Features:

Multiple Sparks At Idle RPM
Direct Bolt-In to Factory Connectors
Improved Spark Energy And Voltage Output
Patented Winding Design and Materials

from

$73.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$145.99

ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Durable to help transfer high voltage pulses without damage
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$63.99

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$117.99

MSD ignition’s Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connectors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance. There are two types of housings for the MSD coils. Check your application for the visual match.

Product Features:

Improved Spark Energy And Voltage Output
Patented Winding Design and Materials
Direct Bolt-In to Factory Connectors

from

$71.99

Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:

Delphi knock sensors help maximize engine performance with all fuels
Delphi knock sensors prevent against engine damage from pre-ignition knocking
Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
Self-generating piezoelectric design requires no power to the sensor

from

$67.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.

from

$34.49

This replacement ignition switch is a direct replacement for a damaged or worn-out original equipment switch Made of quality materials for durability, this part has been tested to ensure a proper fit.

Product Features:

Ideal replacement – this ignition switch matches the fit and function of the original equipment switch to restore proper operation to the ignition circuit
Durable construction – this ignition switch is made of quality materials to ensure reliable performance and a long service life
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$155.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Copper alloy conductors ensure superior electrical conductivity with low resistive losses
Our parts are 100% tested to verify both mechanical and electrical switching performance
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$66.99

This cabin air filter retrofit kit is designed to match the original filter that is required to restore proper cabin airflow on specified vehicles. Made of quality materials, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this cabin air filter retrofit kit is designed to match the original filter required to restore proper cabin airflow on specified vehicles
Ideal solution – this kit is a reliable replacement for the original filter that is clogged or has failed
Durable construction – this kit is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$68.99

This cabin air filter retrofit kit is designed to match the original filter that is required to restore proper cabin airflow on specified vehicles. Made of quality materials, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this cabin air filter retrofit kit is designed to match the original filter required to restore proper cabin airflow on specified vehicles
Ideal solution – this kit is a reliable replacement for the original filter that is clogged or has failed
Durable construction – this kit is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.99

GM Genuine Parts Studs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$67.99

NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$109.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Bolt-on Performance
Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications

from

$69.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$10.99

Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:

Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
Platinum ground electrode for extended life
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Sustained spark performance over 100,000 miles
Lasts up to three times as long as conventional plugs
Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
Iridium Long Life
Enhanced Engine Performance: Enjoy more horsepower, faster and easier starts, and fewer misfires under heavy loads, thanks to the advanced properties of DENSO’s Iridium alloy.
Fuel Efficiency: Experience better conservation of fuel at all times, contributing to overall improved engine efficiency.

from

$2.99

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:

Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
Multi-rib insulator reduces danger of “flash-over”
One-piece terminal post adds strength
Resistor reduces radio frequency interference (RFI) and electrode erosion

from

$3.99

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spark plugs are available for a broad range of applications, including domestic and import cars and trucks of all makes and sizes.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$132.99

ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Durable to help transfer high voltage pulses without damage
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$97.75

Ignition Wire Set

from

$83.99

CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$31.99

ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Durable to help transfer high voltage pulses without damage
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$22.14

Built to match the original equipment in length and fit, ACDelco OES Ignition Wires offer a performance advantage over many aftermarket products.

Product Features:

ACDelco ignition wires are designed to be like Original in critical areas such as cable length and diameter, terminal design and insulator position
Have broad coverage available for most vehicles on the road today from 1980 to present
Provide a high degree of Radio Frequency Interference (RFI) suppression
Are designed to offer fit, form and function for optimum performance
Kevlar reinforced fiberglass core in select sets for increased strength
Core sheathed in radio-static absorbent material for increased RFI suppression
Wire-wound, stainless steel alloy conductor for maximum spark delivery and RFI suppression on most applications
A layer of conductive heat-resistant latex for added durability
Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability
Thick silicone outer jacket for excellent heat resistance
Limited lifetime warranty*

from

$19.99

ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Durable to help transfer high voltage pulses without damage
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function