Name: Strut Assembly
Brand: Motorcraft
SKU: L30001348485MTR
Price: 218.58 USD

from

$218.58

Strut Assembly

from

$36.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$131.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$39.99

Shock Kit

from

$13.99

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$11.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$207.99

Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:

Direct replacement – this suspension trailing arm fits and functions like the original equipment part
Quality construction – manufactured from same materials as original equipment for safety and reliability
Durable – protective finish for long-lasting corrosion resistance
Quality tested – has undergone testing to ensure proper fit and performance

from

$23.49

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$162.99

The S197 Mustang chassis features a rear chassis Brace to assist in absorbing the load that would otherwise be stressed onto the panhard rod. The stock Brace is merely stamped lightweight steel, but Whiteline’s rear chassis Brace is a heavy duty boxed steel and reduces the force on the panhard.

Product Features:

Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.

from

$29.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$195.99

The S197 requires geometry correction once the rear of the car has been lowered to correct the rear lower control arm angles. Whiteline’s rear control arm brackets relocate the control arms to correct the modified geometry and improve anti-squat, reducing rear-dive under acceleration.

Product Features:

Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Precisely placed dampening voids further reduces harshness from sudden road inputs.

from

$298.99

aFe Control lowering springs increase cornering and performance handling, giving you the confidence to take that turn without adversely affecting ride quality. The lowered stance will transform the appearance as well as offer improve aerodynamics. Designed as a direct fit application these springs require no modifications to the vehicle. Made in the USA and are engineered to optimize the factory shock absorber damping and offer a 1.5″ (38mm) front and 1.25″ (31.75mm) rear drop for the perfect blend of performance and style

Product Features:

Engineered To Optimize The Factory Shock Absorber Damping
1 To 1.25 in. Of Drop
Optimized Design For Both V6 and V8 Applications
Powder coat Gloss Silver For Unbeatable Looks And Durability

from

$1150.99

The ultimate entry level suspension upgrade! Performance, handling and comfort make up the Grip Series Stage 1 kit featuring Whiteline signature front and rear adjustable (where applicable) sway bars, drop links and performance lowering springs.

Product Features:

Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

from

$948.99

The ultimate entry level suspension upgrade! Performance, handling and comfort make up the Grip Series Stage 1 kit featuring Whiteline signature front and rear adjustable (where applicable) sway bars, drop links and performance lowering springs.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.

from

$176.99

Whiteline’s upper control arms are built with tubular DOM steel tubing, forged end rings, and formed clevises for optimal strength. Equipped with grease free GIIRO bushings engineered specifically for this application, these arms work to improve handling, without added maintenance or NVH.

Product Features:

Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$214.99

The S197 chassis’ stock lower control arms leave much to be desired and contribute to the inherent traction and wheel hop problems from the factory. Whiteline’s lower control arms are made from tubular DOM steel tube with Forged Ends for optimal strength and feature our Giiro bushings, engineered specific for this application. Our Grease Free, non-bonded bushing design allows the crush tubes to free float, eliminating bushing wind and snap back, increasing handling predictability, and eliminating maintenance and NVH.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$226.99

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$155.99

Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs

from

$364.53

The Motorcraft control arm is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.

Product Features:

Include new bushings and hardware
Ball joint-only cartridges to eliminate the unnecessary replacement of entire control arm assemblies, where applicable
Engineered for easy installation

from

$185.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$37.49

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$23.75

Strut Bellow

from

$47.99

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$75.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

High polish chrome steel bearing races
Replacement helps restore vehicle handling
Superior rubber to steel bonding for durability
Engineered to meet or exceed OE requirements
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features

from

$105.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

High polish chrome steel bearing races
Replacement helps restore vehicle handling
Superior rubber to steel bonding for durability
Engineered to meet or exceed OE requirements
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features

from

$102.55

By helping to reduce wheel bounce and providing consistent control, the wide range of Motorcraft shock absorbers and strut assemblies helps ensure a smooth ride for your customers under ever-changing loads, road conditions and driving situations.

Product Features: