2011 Ford Mustang Engine Parts

Below you will find various in-demand Ford Engine Parts, components and accessories for your 2011 Mustang. Advance Auto Parts has popular Mustang parts like Engine Gaskets and Seals, Camshafts, Engine Mounts and more. You’ll also find aftermarket and OEM Engine Parts for other Mustang model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2011 Ford Mustang Engine Parts below and start saving instantly.

Popular 2011 Ford Mustang Engine Parts Categories

Engine Valve Lifters

Engine Variable Timing Solenoids

Engine Oil Temperature Sensors

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Plenum Gasket Sets

Crankshaft Position Sensors

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Cylinder Head Temperature Sensors

Oil Pans

Engine Revolution Limiters

Engine Oil Cooler Accessories

Cylinder Head Gaskets

Engine Camshaft Bolts

Timing Chain Tensioners

Engine Oil Pump Pickup Tube and Screens

Timing Cover Repair Sleeves

Main Bearing Repair Sleeves

Timing Cover Seals

Engine Valve Stem Seals

Oversized Main Bearings

Standard Rod Bearing Sets

Standard Piston Rings

Camshaft Position Solenoid Connectors

Timing Chain Guides

Standard Individual Rod Bearings

Engine Covers

Timing Crank Gears

Engine Variable Timing Solenoid Connectors

Timing Chain Tensioner Gasket Sets

Remanufactured Engines

Cylinder Heads

Engine Timing Chain Kit with Water Pump

Piston Pin Bushing Sets

Engine Assembly Lube

Engine Crossmembers

Engine Oil Pump Primers

Supercharger Systems

Valve Train Set Up Spring Set

Engine Oil Pressure Indicator Connector

Essential Engine Parts for 2011 Ford Mustangs

from

$34.99

Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:

Arp Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
M12 X 1.50 RH Thread Size
1.7″ Underhead Length

from

$11.49

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$1059.99

The Edelbrock #60225 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60225 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-th

Product Features:

Complete Single For Hydraulic Roller
60cc Combustion Chamber Volume
170cc Intake/60cc Exhaust Runner Volume
1.9 in. Intake/1.6 in. Exhaust Valve Diameter
0.625 in. Deck Thickness

from

$14.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$53.99

Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$32.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$10.99

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$9.79

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$7.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$12.99

Dorman’s Engine Oil Pan Bolts are manufactured with a high corrosion resistance to combat rust in any environment. We also engineer Engine Oil Pans, sold separately.

Product Features:

Direct replacement for a proper fit every time
Available in a variety of sizes and quantities
Over-sized bolts available
High quality steel construction

from

$59.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$42.99

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$48.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$25.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$191.99

Made in USA. Melling high volume oil pumps increase the amount of oil flow by an average of 20% through the engine improving oil pressure at idle providing dependable performance every time in every application. Every Melling high volume oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling high volume oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. High volume gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
High volume oil pump supplies additional oil to engines when necessary for high performance applications or low oil pressure issues

from

$71.99

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength – provides conformability required for older applications
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$72.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES: Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES: Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE: Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED: Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR: Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$2369.99

Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. All gauging of all cylinder bores for diameter and roundness after final honing operation. Quality audits are performed to ensure that the cylinder meets specifications. All new pistons, rings and bearings are installed in every engine. One block per engine family is laid out and checked for all critical and high impact characteristics as defined in our control plans. These measurements include surface finishes, surface flatness and cylindricity in the cylinder bores. Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Valve seats are machined, inspected and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. All new valves, seals and lifters are used in every head. All plugs and fittings are replaced with new. All head and valve assemblies are quantified for leakage. Each connecting rod is measured against OEM specifications. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed. Crankshafts are machined on a fully automated Ju crank CNC crank grinder. All oil galley holes are chamfered and brushed after machining. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals. Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure and any unusual noises. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways

Product Features:

Product Features:

REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color.
CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs.
CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions.
CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal.
DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly.
Product might not be available in all states due to local laws.

from

$315.99

The MSD module selectors allow you to choose two or three different rpm limits that can be activated at different times. With this ability, the possibilities are endless. As an example, we’ll use a drag car with a three step module selector plugged into the rpm socket of a 7AL-2 ignition. The different rpm modules are activated when 12 volts are applied to a corresponding wire. By connecting one wire to the line-lock circuit, one module will be activated during the burnout. This helps keep tire temperatures consistent. When the line-lock button is released, the limit turns off. When you’re on the starting line, you can activate the second limit through the clutch or trans switch. This provides a steady and consistent rpm for firm hole shots every time. When no modules are selected, the remaining high limit is active to protect the engine in the event of driveline failure. The two step works the same, but only with two different limits. The module selectors can also be used with an MSD timing control. By plugging the selector into a retard module socket, you can activate different retard amounts at select times. This is a great feature for engines being upgraded to a multi-stage nitrous system.

Product Features:

Easily set a launch rpm for consistent holeshots
Connects to the factory coils for easy installation
The Best Way To Launch Hard

from

$12.49

PROBLEM-SOLVING SOLUTION — Innovative solution to install and re-seal the original tensioner which utilizes a sealing bead molded to tensioner housing
EASIER TO INSTALL — Features every part for the repair including two gaskets and two tensioner clips for aid in installation
PREMIUM MATERIALS — Proprietary rubber formulation resist high engine temperatures and is compatible with today’s engine oils
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$63.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$13.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$27.99

This engine cylinder head temperature sensor is designed to match the fit, function and appearance of the original sensor on specified vehicles. It is engineered to help restore cylinder head temperature measurement function when an original sensor fails due to an internal short circuit, mechanical shock, or other damage.

Product Features:

Direct replacement – this engine cylinder head temperature sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help restore temperature sensor function when an original sensor fails as a result of electrical faults, shock, or other damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quaility – backed by team of product experts in the United States and more than a century of automotive experience

from

$37.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$40.99

New Standard Replacement Undercar Shield, GT And GT500 Models

Product Features:

GT And GT500 Models, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.79

This engine harmonic balancer bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine harmonic balancer bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$43.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Meet or exceed OEM performance requirements. Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience.

Product Features:

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

Upgrade your 2011 Ford Mustang with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2011 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Engine Parts are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 207 Engine Parts for the 2011 Ford Mustang, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2011 Ford Mustang at great prices. Our Engine Parts inventory for this model ranges from just $3.99 to $6,038.99, with an average price of $177.51. Our 207 Engine Parts in stock come from 28 trusted brands, so you’re sure to find the right part for your 2011 Ford Mustang without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Ford Mustang, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Sealed Power, National, and more. FELPRO Engine Parts start at just $11.99 and boast an impressive 4.6 stars average rating from customers. Sealed Power and National also bring quality to the table, with Engine Parts available starting at $8.49, and at an average 4.3 stars rating. With 200 customer reviews and counting, our 2011 Ford Mustang Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 2011 Ford Mustang!

Best-Selling Engine Gaskets and Seals for 2011 Ford Mustangs

Enhance the driving experience in your Ford with 19 quality Engine Gaskets and Seal components, starting at $12.49.

show more show less

from

$37.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$67.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$20.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES: Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES: Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE: Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED: Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR: Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$35.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$83.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$19.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$119.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$26.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$61.99

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$52.99

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$70.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$62.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$12.49

PROBLEM-SOLVING SOLUTION — Innovative solution to install and re-seal the original tensioner which utilizes a sealing bead molded to tensioner housing
EASIER TO INSTALL — Features every part for the repair including two gaskets and two tensioner clips for aid in installation
PREMIUM MATERIALS — Proprietary rubber formulation resist high engine temperatures and is compatible with today’s engine oils
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$48.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$752.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$155.99

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$101.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$94.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$89.99

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

Most Popular 2011 Ford Mustang Camshafts

Customize your Ford with 17 Camshafts products like Camshaft Position Sensors, Camshaft Seals, and Engine Camshaft Bolts, all priced under $67.99.

show more show less

from

$47.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Inputs from the camshaft, throttle position and crankshaft sensors provide the Powertrain Control Module (PCM) the information needed to make the vehicle perform efficiently.
The Throttle Position Sensor measures how much throttle is being applied; then the PCM tells the fuel injection system how much fuel is needed.
The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
Designed for long service life under harsh under-hood conditions.
Position sensors work in harmony with other emission sensors to help provide the best possible fuel economy and emissions.
Designed with OE electrical connectors ensuring proper fits.

from

$31.99

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$25.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
100% testing to meet OE performance
High temperature resistance for longer life

from

$32.99

The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$34.99

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$57.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our camshaft position sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application
O-rings and seals are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$30.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$34.99

Arp Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
M12 X 1.50 RH Thread Size
1.7″ Underhead Length

from

$31.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Delphi products are manufactured in a Delphi ISO certified facility
Designed digital output for maximum signal to noise ratio
All parts used in the manufacture process are Delphi validated
Not impacted by temperature changes and provide robust, long-lasting sensor protection

from

$25.99

DENSO’s camshaft position sensors are manufactured to the strictest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technology which helps control ignition timing more precisely.

Product Features:

OE technology adapted for the aftermarket
Reduces emissions, increased performance
Delivers the highest reliability and detection accuracy

from

$67.99

OE technology adapted for the aftermarket
Reduces emissions, increased performance
Delivers the highest reliability and detection accuracy

from

$43.49

Delphi products are manufactured in a Delphi ISO certified facility
Designed digital output for maximum signal to noise ratio
All parts used in the manufacture process are Delphi validated
Not impacted by temperature changes and provide robust, long-lasting sensor protection

from

$43.49

Product Features:

Brand may vary by location

from

$39.99

This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$37.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$36.99

OE technology adapted for the aftermarket
Reduces emissions, increased performance
Delivers the highest reliability and detection accuracy

from

$18.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Inputs from the camshaft, throttle position and crankshaft sensors provide the Powertrain Control Module (PCM) the information needed to make the vehicle perform efficiently.
The Throttle Position Sensor measures how much throttle is being applied; then the PCM tells the fuel injection system how much fuel is needed.
The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
Designed for long service life under harsh under-hood conditions.
Position sensors work in harmony with other emission sensors to help provide the best possible fuel economy and emissions.
Designed with OE electrical connectors ensuring proper fits.

Top Picks for 2011 Ford Mustang Engine Mounts

Upgrade Ford Mustangs with top-quality Engine Mounts parts, including 2 OEM and aftermarket selections for your 2011 model.

show more show less

from

$175.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to FORD 05-22;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2005-2022
Weight approx: 4 Lbs
HYDRAULIC
PART GROUP: 3250, 3250

from

$93.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to FORD 07-14;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2007-2014
Weight approx: 4 Lbs
HYDRAULIC
PART GROUP: 3324, 3324

In-Demand Engine Timing Parts for 2011 Ford Mustangs

Select from 64 premium Engine Timing Parts parts for your 2011 Ford Mustang, with prices ranging from $3.99 to $1,659.99.

show more show less

from

$12.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$286.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S995 Engine Timing Crankshaft Sprocket (1 EA), C738F Engine Timing Chain (1 EA), 9-4228 Engine Timing Chain (2 EA), 9-5687 Engine Timing Chain Guide (1 EA), 9-5691 Engine Timing Chain Guide (1 EA), 9-5690 Engine Timing Chain Guide (2 EA), 9-5689 Engine Timing Chain Tensioner (1 EA), 9-5686 Engine Timing Chain Tensioner (2 EA), 9-5697 Engine Timing Chain Tensioner Guide (1 EA), 9-5688 Engine Timing Chain Guide (1 EA).

Product Features:

Timing Chain Kits includes all components for a quick and efficient replacement
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information

from

$40.99

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$35.99

This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:

Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications
Durable construction – this part is made from quality materials to ensure a long service life
Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$75.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$74.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$71.99

Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications
Durable construction – this part is made from quality materials to ensure a long service life
Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$239.99

The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.

Product Features:

Direct replacement – this VVT sprocket fits and performs like the original sprocket
Durable construction – made from durable steel and precision machined for reliable performance
100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
Quality assured – vehicle-specific application has been validation tested to ensure quality

from

$44.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$27.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Designed to meet or exceed OEM performance requirements. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

from

$29.99

Extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements
CAD designed and manufactured using premium materials
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information

from

$416.99

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. SET INCLUDES: C510 Engine Timing Chain (2 EA), 9-4303 Engine Timing Chain (2 EA), S1015 Engine Timing Crankshaft Sprocket (1 EA), 9-5735 Engine Timing Chain Tensioner (2 EA), 9-5738 Engine Timing Chain Guide (1 EA), 9-5736 Engine Timing Chain Guide (1 EA), 9-5737 Engine Timing Chain Guide (2 EA), 9-5740 Engine Timing Chain Tensioner (2 EA), 9-5739 Engine Timing Chain Tensioner Guide (2 EA).

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$189.99

Direct replacement – this VVT sprocket fits and performs like the original sprocket
Durable construction – made from durable steel and precision machined for reliable performance
100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
Quality assured – vehicle-specific application has been validation tested to ensure quality

from

$142.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$43.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$42.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$351.99

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. SET INCLUDES: 9-5737 Engine Timing Chain Guide (2 EA), C510 Engine Timing Chain (2 EA), 9-5735 Engine Timing Chain Tensioner (2 EA), 9-4303 Engine Timing Chain (2 EA), 9-5740 Engine Timing Chain Tensioner (2 EA), 9-5738 Engine Timing Chain Guide (1 EA), 9-5739 Engine Timing Chain Tensioner Guide (2 EA), 9-5736 Engine Timing Chain Guide (1 EA).

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$96.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$90.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$101.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$53.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$3.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Designed to meet or exceed OEM performance requirements. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

from

$38.49

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$17.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Designed to meet or exceed OEM performance requirements. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

Most Sold 2011 Ford Mustang Valve Cover and Cylinder Heads

Explore our best-selling Ford parts for the 2011 Mustang among 23 OEM and aftermarket options starting from $11.99.

show more show less

from

$59.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$59.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$11.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$57.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$34.99

The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$33.99

The Engine Cylinder Head Temperature Sensor provides an input to the engine control module concerning the engine operating temperature. Similar to the engine coolant temperature sensor input, the engine control module will make engine operating condition changes based on engine temperature.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$56.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$48.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$47.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$34.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$39.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$86.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$245.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$36.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$31.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$909.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$766.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$765.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$317.99

CYLINDER HEAD GASKET SET

from

$27.99

Direct replacement – this engine cylinder head temperature sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help restore temperature sensor function when an original sensor fails as a result of electrical faults, shock, or other damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quaility – backed by team of product experts in the United States and more than a century of automotive experience

from

$21.49

Unsurpassed quality that you can trust
Uses leading edge materials
Exacting tolerances
Meets or exceeds OEM specifications

from

$15.99

Approved materials for increased durability in even the most extreme temperatures. All Carquest Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
OE precision matched thermistor position for correct output parameters
Brass sensor housing precision machined to meet or exceed OE thermal conductivity

from

$12.99

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

Top-Rated Engine Parts Brands For Your 2011 Ford Mustang

Shop for the best-rated brands offering Engine Parts and other products for your 2011 Ford Mustangs. Below you’ll find some of our best rated Engine Parts from FELPRO, Sealed Power, and National, and more. Engine Parts from these brands that fit a 2011 Mustang start at just $8.49 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2011 Ford Mustang Engine Parts

When it comes to maintaining or upgrading your 2011 Ford Mustang, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2011 Ford Mustang. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.99, with an average price of just $21.99. Plus, with over 32 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $15.99

(4)

CRANKSHAFT FRONT SEAL SET

“Fit and function like OEM Ford”

from $11.99

(6)

Engine Crankshaft Seal Kit

“Great fit”

from $37.99

(22)

Engine Oil Pan Gasket Set – PermaDry molded rubber

“Fits in place would not replace”

Popular Sealed Power 2011 Ford Mustang Engine Parts

Sealed Power auto parts is one of the highest quality Engine Part brands in the market. Any 2011 Ford Mustang owner should feel confident when installing genuine Sealed Power parts in their vehicle. To ensure the best fit and performance for your 2011 Mustang, Advance Auto Parts carries a full inventory of 3 Sealed Power Engine Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Sealed Power Engine Parts range from $8.49 to $72.99, plus, with more than 34 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $72.99

(1)

Engine Connecting Rod Bearing Set

“Replaced worn bearings on F150 5.4 engine due to an oil pickup clog. Was able to replace rod bearings without removing engine. Bearings fir perfectly ”

from $11.99

(32)

Engine Valve Lifter

“worked well primed them in oil overnight put them in no more valvetrain noise”

from $8.49

(1)

Engine Connecting Rod Bearing

“worked great”

FAQs for 2011 Ford Mustang Engine Parts

Which Engine Parts are best-sellers for 2011 Ford Mustangs?

Out of 207 Engine Parts that fit 2011 Ford Mustangs, the following parts are the top sellers:

Engine Valve Lifter (19690646) – $11.99
Camshaft Sensor (12339386) – $31.99
Engine Crankshaft Seal Kit (15780257) – $35.99

What’s the price range for 2011 Ford Mustang Engine Parts?

Engine Part prices for the 2011 Ford Mustang start at $3.99 and go up to $6,038.99 for the most premium parts.

What’s the average price of a Engine Part for a 2011 Ford Mustang?

The average price for Engine Parts for the 2011 Ford Mustang is $177.51. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Ford Mustang model years?

Yes, we currently carry Engine Parts for 55 model years of Ford Mustangs between 1964 and 2025. Engine Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Engine Parts for my 2011 Ford Mustang?

The cheapest 2011 Ford Mustang Engine Parts we carry in stock are:

Engine Timing Chain Guide (12151930) – $3.99
Engine Oil Cooler Seal (10308317) – $4.99
Multi-Purpose Seal (11035647) – $6.99
Engine Timing Chain Guide (12149444) – $6.99
Stock Replacement Engine Assembly Lubricant, 4 oz. (50175373) – $6.99

What types of Engine Parts do you sell for my 2011 Ford Mustang?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 2011 Ford Mustang:

Can I get help with 2011 Ford Mustang Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Engine Parts and more.

What is your return policy for Ford Mustang Engine Parts?

Advance Auto Parts keeps returns simple. For new Ford Mustang Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2011 Ford Mustang Engine Parts

ARP Auto Racing – 4.6L/ 5.4L Ford Small Block Modular V8, 200000Psi Tensile, M12 X 1.5" Thread (Part No.256-1001)

Felpro – Shaft Repair Sleeve (Part No.16207)

Edelbrock – RPM Small-Block Ford 1.90" Cylinder Head Hydraulic Roller Camshaft (Part No.60225)

Sealed Power – Engine Connecting Rod Bearing (Part No.3380CPA 10)

Sealed Power – Engine Connecting Rod Bearing Set (Part No.8-3230CP 20)

Carquest Premium – Camshaft Sensor (Part No.CSC1084)

Carquest Premium – Engine Oil Filler Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10081)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 13364-1)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S321)

Dorman – Oil Pan Bolts Or Auxiliary Pump Bolts – M6-1.0 X 22 MM (Part No.990-662)

Dorman – Engine Oil Pan: Direct Fit, Steel, Sump, 5 Quart (Part No.264-045)

Carquest Premium – Crankshaft Sensor (Part No.CSC1048)

Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50564 R)

Felpro – Engine Oil Cooler Gasket (Part No.72709)

Melling – Stock Replacement OE Type High Volume Oil Pump and Screen (Part No.M-84BHV-S)

Sealed Power – Engine Crankshaft Main Bearing Set (Part No.4261M 10)

Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 95925-1)

Premium Drive Train – Long Block Engine Assembly, Includes Gasket Kit (Part No.L3899RSP)

MSD Ignition – 2-Step; Ford 5.0L Mod Motor; 2011 (Part No.8731)

Felpro – Engine Timing Chain Tensioner Gasket Set (Part No.ES 73226)

National – Shaft Repair Sleeve (Part No.99363)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S406T)

Dorman – Cylinder Head Temperature Sensor (Part No.926-711)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40619)

KAI – Undercar Shield (Part No.FO1228101)

Dorman – Harmonic Balancer Bolt (Part No.926-885)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5689)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 30725 R)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50477 R)

Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 97214)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40644)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50814 R)

Felpro – Engine Oil Pan Gasket Set, 16 Bolt Hole, One Piece Gasket (Part No.OS 30850 R)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50811 R)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40729)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 46159)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 46182)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72888)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72936)

Felpro – Engine Timing Chain Tensioner Gasket Set (Part No.ES 73226)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71327)

Felpro – Engine Gasket Set (Part No.260-3182)

Felpro – Engine Conversion Gasket Set (Part No.CS 26543-1)

Felpro – Engine Conversion Gasket Set (Part No.CS 9790-4)

Victor Reinz – Engine Valve Cover Gasket Set (Part No.15-10491-01)

Felpro – Engine Conversion Gasket Set (Part No.CS 26550-1)

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.DU-70)

Carquest Premium – Camshaft Sensor (Part No.CSC1031)

Carquest – Camshaft Sensor (Part No.35C1005)

NTK – Engine Camshaft Position Sensor (Part No.EC0117)

Carquest Premium – Camshaft Sensor (Part No.CSC1147)

Carquest Premium – Camshaft Position Sensor (Part No.CSC1291)

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1481)

ARP Auto Racing – 4.6L/ 5.4L Ford Small Block Modular V8, 200000Psi Tensile, M12 X 1.5" Thread (Part No.256-1001)

Delphi – Engine Camshaft Position Sensor (Part No.SS10058)

DENSO – Camshaft Position Sensor (Part No.196-6007)

DENSO – Camshaft Position Sensor (Part No.196-6006)

Delphi – Engine Camshaft Position Sensor (Part No.SS11385)

Driveworks – Main Bearing Repair Sleeve (Part No.S-99181)

Dorman – Magnetic Camshaft Position Sensor (Part No.917-734)

Carquest Premium – Multi-Use Connector (Part No.PTA1442)

DENSO – Camshaft Position Sensor (Part No.196-6012)

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.DU-90)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.3250)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.3324)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88187)

Cloyes Gear – Engine Timing Chain Kit (Part No.9-0738S)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1042)

Dorman – Variable Valve Timing Solenoid (Part No.918-000)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1038)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1036)

Dorman – Variable Valve Timing Solenoid (Part No.917-198)

Dorman – Camshaft Phaser (Part No.916-552)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5735)

Cloyes Gear – Engine Timing Chain Guide (Part No.9-5688)

Cloyes Gear – Engine Timing Chain Tensioner Guide (Part No.9-5697)

Cloyes Gear – Engine Timing Chain Kit (Part No.9-0510S)

Dorman – Camshaft Phaser (Part No.916-540)