2011 Ford Expedition Valve Cover and Cylinder Heads
More 2011 Ford Expedition Valve Cover and Cylinder Heads
Find your specific 2011 Ford Expedition original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2011 Ford Expedition Valve Cover and Cylinder Heads
Mahle – Cyl. Head Bolt Set (Part No.A30311335709MAH)
from
$92.08
Cyl. Head Bolt Set
Mahle – Cyl. Head Bolt Set (Part No.A3031566828MAH)
from
$68.99
Cyl. Head Bolt Set
NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0008)
from
$34.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1292)
from
$9.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Walker Products – Cyl. Head Temp Senso (Part No.A3035415005WKR)
from
$31.71
The Walker Cylinder Head Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0009)
from
$33.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Felpro – Cylinder Head Gasket Set (Part No.HS 9790 PT-17)
from
$236.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket Set (Part No.HS 9790 PT-12)
from
$143.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Victor Reinz – Engine Cylinder Head Gasket Set (Part No.02-10457-01)
from
$486.99
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Mahle – Cylinder Head Gasket (Part No.A80101701383MAH)
from
$598.53
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Head sets give you original equipment form, fit, and function
- Utilizes OE equivalent or better materials in all head sets
- Packaged in shrink wrapped tray
- Every part you need to complete your gasket repair in one package unless otherwise stated
Sealed Power – Engine Valve Lifter (Part No.HT-2305)
from
$15.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Lifter (Part No.HT-2271)
from
$10.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71328)
from
$56.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – CYLINDER HEAD BOLT SET (Part No.ES 71324)
from
$56.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26306 PT)
from
$61.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY NEXTGEN COATING TECHNOLOGY – Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
- UNIQUE COMBUSTION SEAL – Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
- MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
Felpro – Cylinder Head Gasket (Part No.A8100975071FEL)
from
$69.72
Cylinder Head Gasket
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.9790 PT-2)
from
$58.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
- SUPERIOR SEAL — Precise embossed sealing beads at all vital areas to eliminate leak paths
- MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- UNIQUE COMBUSTION SEAL — Accommodates high cylinder pressures and head movement encountered with engines
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26710 PT)
from
$73.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
- SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26680 PT)
from
$57.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY NEXTGEN COATING TECHNOLOGY — Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
- UNIQUE COMBUSTION SEAL — Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
- MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- SUPERIOR SEAL — Precise embossed sealing beads at vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26711 PT)
from
$73.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.9792 PT-2)
from
$58.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Dorman – Valve Covers: Direct Replacement, Cast Aluminum, Driver Side (Part No.264-909)
from
$149.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
Product Features:
See More
Product Features:
- Direct replacement – this valve cover matches the original equipment part for fit and function
- Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
Dorman – Valve Covers: Direct Replacement, Cast Aluminum, Passenger Side (Part No.264-908)
from
$157.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
Product Features:
See More
Product Features:
- Direct replacement – this valve cover matches the original equipment part for fit and function
- Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
Dorman – Valve Cover (Part No.A3160685617DOR)
from
$183.06
Save time and money with Dorman’s Engine Valve Cover. Each one comes with the appropriate number of gaskets as well as all other components needed for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Provides a tight, lasting seal against oil leaks
- High quality plastic, steel, or aluminum construction resists warping, cracking and porousness
- Metal construction is corrosion-resistant for sustained protection of the rocker arms
Popular 2011 Ford Expedition Valve Cover and Cylinder Heads Categories
2011 Ford Expedition Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 2011 Ford Expedition. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 16 different Valve Cover and Cylinder Heads in our inventory ranging from $15.79 to $348.13. That means you can find the exact parts or products you need to keep that 2011 Ford Expedition running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Ford Expedition. Felpro, Dorman, and Sealed Power are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 2011 Ford Expedition, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 2011 Ford Expedition rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 2011 Ford Expedition Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Ford Expedition demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Expedition the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Sealed Power Valve Cover and Cylinder Heads
We carry Sealed Power parts in our stock across Engine Valve Lifters categories, plus more. For a 2011 Ford Expedition, our most popular Sealed Power Valve Cover and Cylinder Heads include:
Top 2011 Ford Expedition Valve Cover and Cylinder Heads from Felpro
Felpro products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 2011 Ford Expedition. Popular Felpro parts include:
FAQs for 2011 Ford Expedition Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 2011 Ford Expedition?
Out of 16 Valve Cover and Cylinder Heads for the 2011 Ford Expedition, the most popular in our inventory are:
