2011 Ford Expedition Drivetrains

Essential 2011 Ford Expedition Drivetrains

Yukon Gear – Super Carrier Shim Kit For Ford 9.75" (Part No.55062)

Super Carrier Shim Kit For Ford 9.75"

from

$94.99
9.75″ Ford Supershim carrier shim kit.

Product Features:
  • Super carrier shim kit for Ford 9.75″
  • Interlocking design makes installation much easier
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

ARP Auto Racing – For Use With Ford 8.8 And 9" Using 3/4"Socket, 0.75"L Under Head, 7/16"-20 (Part No.250-3003)

For Use With Ford 8.8 And 9" Using 3/4"Socket, 0.75"L Under Head, 7/16"-20

from

$34.99
The tremendous shock loads generated at launch by most any drag racing vehicle equipped with today sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. they are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

Product Features:
  • Forged From Premium Grade 8740 Chrome Moly Steel
  • Heat Treated
  • Nominally Rated At 200,000 Psi Tensile Strength
  • Specially Hardened, Precision Ground Washers
  • 0.75″ Underhead Length
  • 200,000 PSI
  • Sold As A Set
See More

Yukon Gear – Pinion Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33297)

Pinion Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford

from

$8.99
Pinion gear thrust washer (0.750″ shaft) for 8.8″ Ford.

Product Features:
  • Pinion gear thrust washer
  • Fits Ford 8.8″
  • 0.750″ I.D.
See More

Dorman – Solenoid, 4WD Engage And Emissions Purge (Part No.600-400)

Solenoid, 4WD Engage And Emissions Purge

from

$45.49
This 4WD hub locking solenoid directly replaces the original equipment solenoid on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this 4WD hub locking solenoid matches the fit and function of the stock solenoid on certain vehicle applications
  • Effective fix – restores control of 4WD system impacted by failed original solenoid
  • Thoroughly tested – on-vehicle and laboratory testing ensures trouble-free operation
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)

Carrier Installation Kit For Ford 8.8" Differential

from

$134.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Ford 8.8″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Cardone – Transfer Case Motor (Part No.48-207)

Transfer Case Motor

from

$102.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

Product Features:
  • All motors are 100% torque tested to ensure strength for proper gear engagement.
  • Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
  • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
  • Motor magnets are 100% recharged for superior performance and reliability.
  • Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
See More

Yukon Gear – Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33300)

Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford

from

$11.99
Side gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:
  • Side gear thrust washer for Ford 8.8″
  • 0.875″ diameter cross pin shaft applications only
See More

SKF – Axle Shaft Seal (Part No.K4021208072SKF)

Axle Shaft Seal

from

$15.73
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

Anchor – Center Support Bearing Motor Mount: Rear, 1 Piece (Part No.6140)

Center Support Bearing Motor Mount: Rear, 1 Piece

from

$131.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 09-21; LINCOLN 09-21;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 2009-2021
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.38 INCH / 60 MM
  • MOUNT WIDTH: 6.15 INCH / 156 MM
See More

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Differential Shaft Lock Bolt

from

$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Driveworks – Axle Shaft Bearing (Part No.S-HK-4012)

Axle Shaft Bearing

from

$10.79
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Yoke For Ford 8.8" Truck U/Joint Size (5" Od) (Part No.41050)

Yoke For Ford 8.8" Truck U/Joint Size (5" Od)

from

$221.99
Yukon yoke for Ford 8.8″ truck U/joint size (5″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″
  • 30 spline
  • Round companion flange
  • 5.00″ O.D.
See More

NTN – Wheel Bearing (Part No.K8000345509NTN)

Wheel Bearing

from

$87.01
Wheel Bearing

Yukon Gear – Standard Open Carrier Case, Ford 8.8", 31 Spline (Part No.20077)

Standard Open Carrier Case, Ford 8.8", 31 Spline

from

$269.99
8.8″ 31 spline standard Open case (7/8 X-PIN HOLE).

Product Features:
  • Standard open carrier case
  • Fits Ford 8.8″ with 31 spline axles
  • Does not include spider gears
  • 0.875″ cross pin shaft diameter
See More

Powertrax – Lock Right Locker (Part No.1822-LR)

Lock Right Locker

from

$371.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Conversion Crush Sleeve To Install ’11 & Newer Ford 9.75" Ring & Pinion Set Into ’10 & Down Housing (Part No.33545)

    Conversion Crush Sleeve To Install '11 & Newer Ford 9.75" Ring & Pinion Set Into '10 & Down Housing

    from

    $76.99
    Product Features:
    • Crush sleeve
    • Fits Ford 9.75″
    • Conversion crush sleeve to install 2011 and up ring and pinion set into 2000-2010 housing
    See More

    National – Bearings (Part No.111)

    Bearings

    from

    $77.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Dorman – Independent Wheel End Coupler (Vacuum Delete Kit) (Part No.600-405)

    Independent Wheel End Coupler (Vacuum Delete Kit)

    from

    $179.99
    The internal diaphragm on vacuum-activated hub actuators is prone to failure on certain 4WD vehicles. This replacement hub locking actuator restores 4WD and ensures greater reliability by eliminating that problematic vacuum function.

    Product Features:
    • Dependable solution – this unique hub locking actuator delete enables 4WD operation while disabling the failure-prone original vacuum function
    • Cost-effective fix – deleting need for troublesome vacuum saves future replacement cost and frustration
    • Patented design – exclusively engineered in the United States by highly trained automotive experts
    • Fully reversible – actuator includes vacuum caps for holding remnant lines and allow for restoring original function in future
    See More

    Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.986-532)

    Rear Drive Shaft: Greaseable, Adjustable

    from

    $446.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    Yukon Gear – Pinion Install Kit For Ford 8.8" Differential (Part No.13041)

    Pinion Install Kit For Ford 8.8" Differential

    from

    $167.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits 2009 and down Ford 8.8″
    • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
    See More

    Motive Gear – Axle Shaft (Part No.MG2192)

    Axle Shaft

    from

    $116.99
    The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

    Product Features:
    • AXLE SHAFT 8.8″ 31 3/4″ R.H. 12&14 MM STUDS
    See More

    Yukon Gear – Cross Pin Shaft (0.875") For ’86 And Newer 8.8" Ford (Part No.33331)

    Cross Pin Shaft (0.875") For '86 And Newer 8.8" Ford

    from

    $42.99
    Cross pin shaft (0.875″) for ’86 and newer 8.8″ Ford.

    Product Features:
    • Cross pin shaft for Ford 8.8″
    • 0.875″ diameter
    See More

    Yukon Gear – Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16042)

    Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

    from

    $41.99
    Product Features:
    • Shim kit
    • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
    See More

    Driveworks – Transfer Case Input Shaft Seal (Part No.S-714503)

    Transfer Case Input Shaft Seal

    from

    $10.49
    Product Features:
    • Brand may vary by location
    See More

    National – Multi Purpose Seal (Part No.3946)

    Multi Purpose Seal

    from

    $25.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Popular 2011 Ford Expedition Drivetrains Categories

    2011 Ford Expedition Drivetrains

    You count on your 2011 Ford Expedition to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 194 Drivetrains ranging in price from $1.99 to $1,639.99, you’re sure to find everything you need for your 2011 Ford Expedition.

    Brands matter. If you want to shop a specific Drivetrains brand, we stock 22 different brands like Valvoline, Dorman, and Moog. 2011 Ford Expedition Drivetrains start as low as $1.99!

    One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 7,424 extensive product reviews on 2011 Ford Expedition Drivetrains. Some of the top-rated Drivetrains products we carry are Solenoid, 4WD Engage And Emissions Purge with 4.1 stars and Greaseable Premium Universal Joint with 4.0 stars.

    Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2011 Ford Expedition below to get started!

    Top-Rated Drivetrains Brands For Your 2011 Ford Expedition

    Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Ford Expedition running right for years to come. In our inventory you’ll find brands like Valvoline, Dorman, Moog, and even more.

    Popular Tech Smart Drivetrains

    You’ll find popular Tech Smart brand products across 4WD Components. All are waiting to get your 2011 Ford Expedition back on the road. Some of the top-rated Tech Smart products in these categories are:
    4WD Actuator
    from $112.05
    (1)
    4WD Actuator
    4WD Actuator Switches

    FAQs for 2011 Ford Expedition Drivetrains

    What are the most purchased Drivetrains for the 2011 Ford Expedition?

    Out of 194 Drivetrains for the 2011 Ford Expedition, the most popular in our inventory are:
    4WD Locking Hub Actuator
    from $111.99
    (50)
    4WD Locking Hub Actuator
    4WD Actuator Switches
    Greaseable Super Strength Universal Joint
    from $36.99
    (41)
    Greaseable Super Strength Universal Joint
    U-Joints
    Universal Joint
    from $15.99
    (65)
    Universal Joint
    U-Joints

    What are the top-rated 2011 Ford Expedition Drivetrains?

    Top-rated Drivetrains for your 2011 Ford Expedition based on customer reviews/ratings are:
    Solenoid, 4WD Engage And Emissions Purge
    from $45.49
    (40)
    Solenoid, 4WD Engage And Emissions Purge
    “Replaced and solenoid with this item exact fit with rain hat works great!!”
    Greaseable Premium Universal Joint
    from $19.99
    (31)
    Greaseable Premium Universal Joint
    “Greaseable with life time warranty”
    Universal Joint
    from $15.99
    (28)
    Universal Joint
    “It worked”