2011 Chevrolet Malibu Ball Joints
More 2011 Chevrolet Malibu Ball Joints
Find your specific 2011 Chevrolet Malibu original or aftermarket Ball Joints below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2011 Chevrolet Malibu Ball Joints
Driveworks – Suspension Control Arm and Ball Joint Assembly (Part No.520-164)
from
$151.99
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Driveworks’ Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.
Product Features:
See More
Product Features:
- Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
Rare Parts – Control Arm with Ball Joint (Part No.RP11358)
from
$129.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
MOOG – Control Arm and Ball Joint Assembly (Part No.RK620180)
from
$203.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
- HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Rare Parts – Control Arm with Ball Joint (Part No.RP12546)
from
$266.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK620179)
from
$202.99
MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength durability and confidence is required.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
MOOG – Control Arm and Ball Joint Assembly (Part No.RK620260)
from
$162.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK80428)
from
$95.99
MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
Rare Parts – Control Arm with Ball Joint (Part No.RP11359)
from
$129.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Driveworks – Suspension Control Arm and Ball Joint Assembly (Part No.520-134)
from
$62.99
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Autocraft’s Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.
Product Features:
See More
Product Features:
- Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK621201)
from
$266.99
MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
Rare Parts – Control Arm with Ball Joint (Part No.RP12547)
from
$266.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Rare Parts – Control Arm with Ball Joint (Part No.RP13074)
from
$371.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
MOOG – Control Arm and Ball Joint Assembly (Part No.RK80446)
from
$89.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Suspension Control Arm (Part No.521-952)
from
$167.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Carquest Premium – Suspension Control Arm (Part No.810-96726B)
from
$194.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Driveworks – Suspension Control Arm and Ball Joint Assembly (Part No.520-138)
from
$149.99
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Driveworks’ Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.
Product Features:
See More
Product Features:
- Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK620180)
from
$212.99
MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
MOOG – Control Arm and Ball Joint Assembly (Part No.RK80428)
from
$89.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Rare Parts – Control Arm with Ball Joint (Part No.RP13075)
from
$371.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
MOOG – Control Arm and Ball Joint Assembly (Part No.RK620179)
from
$203.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
- HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
MOOG – Control Arm and Ball Joint Assembly (Part No.RK641501)
from
$223.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Suspension Control Arm (Part No.520-134)
from
$76.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Carquest Premium – Control Arm with Ball Joint (Part No.810-425993B)
from
$189.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.
Product Features:
See More
Product Features:
- Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
- Pre-installed ball joints and bushings (when applicable) for easy installation
- Fully polished ball studs combined with synthetic bearing technology for maintenance-free smooth operation and improved reliability
- Hardware included for easier installation
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK621200)
from
$266.99
MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
Dorman – Suspension Control Arm (Part No.520-163)
from
$189.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK80446)
from
$95.99
MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
Carquest Premium – Control Arm with Ball Joint (Part No.810-425984B)
from
$189.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.
Product Features:
See More
Product Features:
- Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
- Pre-installed ball joints and bushings (when applicable) for easy installation
- Fully polished ball studs combined with synthetic bearing technology for maintenance-free smooth operation and improved reliability
- Hardware included for easier installation
Driveworks – Suspension Control Arm and Ball Joint Assembly (Part No.520-163)
from
$151.99
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Driveworks’ Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.
Product Features:
See More
Product Features:
- Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
Popular 2011 Chevrolet Malibu Ball Joints Categories
2011 Chevrolet Malibu Ball Joints
Maybe you’re in the middle of a full rebuild of that 2011 Chevrolet Malibu. Maybe you just need a couple of Ball Joints. Either way, Advance Auto Parts has 13 different Ball Joints in our inventory ranging from $151.99 to $266.99. That means you can find the exact parts or products you need to keep that 2011 Chevrolet Malibu running smoothly.
Ball Joints are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Chevrolet Malibu. Carquest Premium, Moog, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ball Joints for your 2011 Chevrolet Malibu, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ball Joints to keep your 2011 Chevrolet Malibu rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ball Joints Brands To Make Your 2011 Chevrolet Malibu Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Chevrolet Malibu demands trusted brand parts and products to keep it running. Many trusted brands of Ball Joints make up Advance Auto Parts’ inventory, and all are ready to help make your Malibu the best it can be. Be sure to browse some of our top Ball Joints brands and parts.
Popular MOOG Ball Joints
We carry MOOG parts in our stock across Lower Control Arm and Ball Joints categories, plus more. For a 2011 Chevrolet Malibu, our most popular MOOG Ball Joints include:
Top 2011 Chevrolet Malibu Ball Joints from Driveworks
Driveworks products are another trusted brand when it comes to Ball Joints for your 2011 Chevrolet Malibu. Popular Driveworks parts include:
FAQs for 2011 Chevrolet Malibu Ball Joints
What are the most purchased Ball Joints for the 2011 Chevrolet Malibu?
Out of 13 Ball Joints for the 2011 Chevrolet Malibu, the most popular in our inventory are:
