2009 Dodge Ram 3500 Performance Ignition Products
More 2009 Dodge Ram 3500 Performance Ignition Products
Find your specific 2009 Dodge Ram 3500 original or aftermarket Performance Ignition Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2009 Dodge Ram 3500 Performance Ignition Products
aFe POWER – Power Module (Part No.77-42006)
from
$511.99
Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.
Product Features:
See More
Product Features:
- Direct Plug And Play Power
- Increased Turbo Boost And Fuel Pressure
- In Cabin On The Fly Power Adjustment
- 4 Position Switch
aFe POWER – Power Module (Part No.77-42007)
from
$511.99
Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.
Product Features:
See More
Product Features:
- Direct Plug And Play Power
- Increased Turbo Boost And Fuel Pressure
- In Cabin On The Fly Power Adjustment
- 4 Position Switch
aFe POWER – Power Module (Part No.77-42008)
from
$511.99
Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.
Product Features:
See More
Product Features:
- Direct Plug And Play Power
- Increased Turbo Boost And Fuel Pressure
- In Cabin On The Fly Power Adjustment
- 4 Position Switch
MSD Ignition – Ignition/Timing Control for Late HEMI (Part No.6013)
from
$768.99
These MSD 6-Hemi ignition controllers fire the coils and control the timing on Hemis that are retro-fit with a carburetor or late model factory electronic fuel injection. You program two separate rev limits and have a single-step retard adjustment. The MSD 6-Hemi ignition controllers connect easily, directly to the coils, crankshaft, cam, and MAP sensors for a simple installation. Wiring harnesses for installing on factory EFI engines are sold separately.
Product Features:
See More
Product Features:
- Fires Coils and Controls Timing on Hemis Retro-Tit
- Program two rev limits and a step retard
- Can be used w/Carburetor or factory EFI
- Easily connects directly to coils/crank/cam/MAP sensors
Auto Ventshade (AVS) – Eclipse; Large Hood Scoops (Part No.80001)
from
$123.99
LUND is the first automotive accessory manufacturer to develop and offer comprehensive packages to customize and personalize trucks, SUVs, and vans. An American-based company and the creator of the wrap hood shield category through the invention of the Interceptor hood shield, LUND designs and manufactures the most stylish, high performance, and premium automotive accessories for trucks and SUVs. Product categories include: Interceptor hood protection, nerf bars, running boards, tonneau covers, exterior accessories, storage boxes, cargo management, and bed accessories.
Product Features:
See More
Product Features:
- Unique, stylized hood scoops for trucks and cars
- Transform stock hood into a simulated performance hood
- Can easily be painted to match any factory color
MSD Ignition – Coil; 5.7/6.1L HEMI; 05-14; Single (Part No.8255)
from
$103.99
Fire up your late model hemi with a set of MSD’s blaster coils. The coils are a direct bolt-in and are spec’d with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.
Product Features:
See More
Product Features:
- Improved High RPM Operation
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
- Secondary Current (mA): 56 mA
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)
from
$72.39
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Standard Motor Products SMP Uf-198
- MSD 8228
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
MSD Ignition – Coil; Chrysler Late Model; 90-96 (Part No.8228)
from
$72.09
When it comes to late model performance parts nothing beats bolt-on and direct connection components. These new bolt-in coils are designed with improved materials and windings to produce a stronger output. The MSD blaster coils is a direct replacement for late model dodges.
Product Features:
See More
Product Features:
- Direct performance replacement for late model Dodge vehicles
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
- Improved mid range RPM power
- Connect to factory wiring
- Use PN 8877 harness for direct plug in install
Popular 2009 Dodge Ram 3500 Performance Ignition Products Categories
2009 Dodge Ram 3500 Performance Ignition Products
Maybe you’re in the middle of a full rebuild of that 2009 Dodge Ram 3500. Maybe you just need a couple of Performance Ignition Products. Either way, Advance Auto Parts has 3 different Performance Ignition Products in our inventory ranging from $103.99 to $511.99. That means you can find the exact parts or products you need to keep that 2009 Dodge Ram 3500 running smoothly.
Performance Ignition Products are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2009 Dodge Ram 3500. Auto Ventshade (AVS), MSD Ignition, and aFe POWER are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Ignition Products for your 2009 Dodge Ram 3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Ignition Products to keep your 2009 Dodge Ram 3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Ignition Products Brands To Make Your 2009 Dodge Ram 3500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2009 Dodge Ram 3500 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Ignition Products make up Advance Auto Parts’ inventory, and all are ready to help make your Ram 3500 the best it can be. Be sure to browse some of our top Performance Ignition Products brands and parts.
FAQs for 2009 Dodge Ram 3500 Performance Ignition Products
What are the most purchased Performance Ignition Products for the 2009 Dodge Ram 3500?
Out of 3 Performance Ignition Products for the 2009 Dodge Ram 3500, the most popular in our inventory are:
