from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Lasts Longer
Looks Great

from

$399.99

The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.

Product Features:

HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
Reads and Erases Diagnostic Trouble Codes
Display Over 15 Vehicle Parameters
Installation Is Easy-10-20 Minutes
Free Internet Updates And Upgrades
30 Day Money Back Guarantee

from

$425.99

Revolutionary handheld tuner quickly and easily reprograms your vehicle for more power across the entire rpm range! 50 State Legal!

Product Features:

Average gains in excess of 30 HP/40 ft.-lbs. for gas and 80 HP/150 ft.-lbs. diesel*
HD 2.8¿ color screen with updated interface for easier and faster modifications
HD 2.8┐ color screen with updated interface for easier and faster modifications
Increased memory and faster processor for improved tuning plus faster updating
Active fuel management control*
Performance test (0-60, ╝ mile testing)
Performance test (0-60, ¼ mile testing)
Internet updating using PC software
Tire size adjustment
Axle gear ratio adjustment
Shift point and firmness adjustment*
Speed and rev limiter adjustments*
Carb EO # D-745
Diagnostic capability ¿ read and clear trouble codes with explanation of codes
Diagnostic capability ┐ read and clear trouble codes with explanation of codes

from

$1049.99

If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 pound bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.

Product Features:

Provides Additional Air Your Diesel Wants
Additional 50 HP
w/No Fuel System Or Electronic Upgrades
Complete Kit For Easy Installation

from

$469.99

Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.

Product Features:

Direct Plug And Play Power
Increased Turbo Boost And Fuel Pressure
In Cabin On The Fly Power Adjustment
4 Position Switch

from

$469.99

Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.

Product Features:

Direct Plug And Play Power
Increased Turbo Boost And Fuel Pressure
In Cabin On The Fly Power Adjustment
4 Position Switch

from

$469.99

Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.

Product Features:

Direct Plug And Play Power
Increased Turbo Boost And Fuel Pressure
In Cabin On The Fly Power Adjustment
4 Position Switch

from

$469.99

Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.

Product Features:

Direct Plug And Play Power
Increased Turbo Boost And Fuel Pressure
In Cabin On The Fly Power Adjustment
4 Position Switch

from

$123.99

Ditch that plain-Jane stock appearance once and for all. AVS Hood Scoops add 200HP in looks alone. Its heat-resistant, UV-protected, thermoplastic material is built to last a lifetime delivering unmistakable eye appeal wherever you go. Available in smooth black nish with paintable surface so you can match your factory paint if you like. Choose from several styles and sizes in 1- and 2-piece options. Cleanly mounts with 3M automotive-grade adhesive tape concealed. . Proudly made in the USA with global materials.

Product Features:

Its High-Impact / UV Protected Thermoplastic Material Is Heat Resistant And Built To Last A Lifetime.
Available In Smooth Black Finish. If You Like / Deck Out Its Paintable Surface To Match Your Vehicles Paint Color.
No Drilling Required – Attach With The Included 3M Automotive-Grade Adhesive Tape And Youre Ready To Hit The Road.
Specially Designed To Conceal Adhesive Tape On The Underside Of Hood Scoop.
AVS Hood Scoops Come In Both One- And Two-Piece Configurations To Suit Your Personal Style.
Made In The USA With Global Materials.

from

$419.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$367.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$419.99

The K&N 71-1557 Blackhawk Induction Air Intake System is a free-flowing, mandrel-bent aluminum tube air intake system that is guaranteed to gain power. It replaces your vehicle’s restrictive factory air filter and air intake housing. This low restriction air intake allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more power and acceleration. This K&N Blackhawk Induction Air Intake System comes with black components including the K&N high-flow air filter and heat shield. The attractive textured black powder-coated finish tube features an engraved K&N plate welded on to which gives it a clean, high-performance look under the hood. The intake tube accommodates the factory mass air sensor, air temperature sensor, filter minder (where equipped) and a replacement silicone crank case vent hose. The oversized cone shaped air filter is made from an oil-free synthetic filter media that can be used for up to 100,000 miles before cleaning is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points using commonly available tools. Some K&N Blackhawk Induction Systems are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 71-1557 vehicle applications to determine the legal status for each vehicle.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$199.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
WILL NOT VOID VEHICLE WARRANTY
Product might not be available in all states due to local laws.

from

$472.99

The K&N AirCharger 63-1562 air intake system replaces the restrictive factory air filter and air intake housing in some Dodge Ram models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Dodge Ram’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1562 air intake comes with a K&N high-flow air filter and a uniquely shaped air box that pulls in cooler outside air near the bumper into the custom molded intake for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver, socket set and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$419.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$472.99

The K&N 71-1532 Blackhawk Induction Air Intake System is a free-flowing, mandrel-bent aluminum tube air intake system that is guaranteed to gain power. It replaces your vehicle’s restrictive factory air filter and air intake housing. This low restriction air intake allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more power and acceleration. This K&N Blackhawk Induction Air Intake System comes with black components including the K&N high-flow air filter and heat shield. The attractive textured black powder-coated finish tube features an engraved K&N plate welded on to which gives it a clean, high-performance look under the hood. The intake tube accommodates the factory air temperature sensor and filter minder. The oversized cone shaped air filter is made from an oil-free synthetic filter media that can be used for up to 100,000 miles before cleaning is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points using commonly available tools. Some K&N Blackhawk Induction Systems are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 71-1532 vehicle applications to determine the legal status for each vehicle.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$367.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$454.99

Unique One-Piece Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold weather applications where you want to block the auxiliary air scoop. A large, stainless steel plate is used for an aggressive style.Huge Pro DRY S Performance Air Filter: The Momentum HD is designed around a massive Pro DRY S performance 360 degree radial flow air filter with 3-layers of progressive synthetic media providing 99.2% cumulative efficiency. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse.Premium Hardware: Premium stainless steel T-bolt clamps and a 2-ply reinforced silicone hump coupling at the turbo is used for strength and durability while also providing the most secure installation available. Momentum HD intakes are designed with fewer parts for a quick and simple installation.Proven Results: After a rigorous design and testing phase, the results are in. The Momentum HD intake system outflowed the factory intake by 38% and produces 19 additional horsepower and 47lbs. x ft. torque.

Product Features:

Dyno-Proven Gains up to +19 HP and +47 Lbs. x Ft. TQ
Outflows Factory Intake by 38%
Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
Premium stainless steel T-bolt clamps are used for strength and durability

from

$440.99

Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:

1000 cfm Performance 360 deg. Radial Flow Air Filter
10 Layer Progressive Cotton Gauze Oiled Media
Unique Air Filter To Housing Interface
Allows For Maximum Filter Size

from

$419.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$199.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
WILL NOT VOID VEHICLE WARRANTY

from

$440.99

Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:

1000 cfm Performance 360 deg. Radial Flow Air Filter
10 Layer Progressive Cotton Gauze Oiled Media
Unique Air Filter To Housing Interface
Allows For Maximum Filter Size

from

$390.99

Large Three Layer Performance Air Filter:This 9″ tall 360-degree radial flow air filter features a 6-3/4″ x 4-3/4″ flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals.

Product Features:

+17 lbs. x ft. TQ & +7 HP
Outflows Factory Intake by 21%
Measured Flow: 630 CFM @ 7″ H2O
Durable XLPE Construction Protects From Impact, Extreme Temperatures, and Other Elements

from

$379.99

Quantum Cold Air Intake Systems (Patent Pending) by aFe POWER are the latest in airflow technology for your Ford Power Stroke 6.7L (td) truck. From the uniquely integrated Filter-to-Housing design to the state of the art, lightweight injection molded base and top Pro 5R filter, Quantum delivers dyno-proven performance gains, convenience, value and installs in minutes.

Product Features:

Outflows Factory Intake
Unique Filter To Housing Interface For Easy Installation
CAD Designed XLPE Roto-Molded Intake Tube For Optimum Airflow
Intake Tube Heat Soak Resistant and Durable

from

$199.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
WILL NOT VOID VEHICLE WARRANTY

from

$390.99

Quantum Cold Air Intake Systems (Patent Pending) by aFe POWER are the latest in airflow technology for your Ford Power Stroke 6.7L (td) truck. From the uniquely integrated Filter-to-Housing design to the state of the art, lightweight injection molded base and top Pro DRY S filter, Quantum delivers dyno-proven performance gains, convenience, value and installs in minutes.

Product Features:

Outflows Factory Intake
Unique Filter To Housing Interface For Easy Installation
CAD Designed XLPE Roto-Molded Intake Tube For Optimum Airflow
Intake Tube Heat Soak Resistant and Durable

from

$199.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
WILL NOT VOID VEHICLE WARRANTY

from

$390.99

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

Uses Pro 5R Filter For Maximum Air Flow
Rotomolded Plastic Tube
Improved Throttle Response
Repl. Factory Intake For Improved HP/Torque/Styling

2010 Dodge Ram 3500 Performance and Racing Products

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13130R)

Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)

Accel – Handheld Computer Programmer for Enhanced Performance and Tuning Control (Part No.49505)

NOS/Nitrous Oxide Systems – Diesel; Nitrous System (Part No.02519NOS)

aFe POWER – Power Module (Part No.77-42007)

aFe POWER – Power Module (Part No.77-42008)

aFe POWER – Power Module (Part No.77-42006)

aFe POWER – Power Module (Part No.77-42005)

Auto Ventshade (AVS) – Eclipse, Large Hood Scoops (Part No.80001)

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.77-1533KP)

K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.57-1533)

K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter (Part No.71-1557)

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9938)

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.63-1562)

K&N – Cold Air Intake: Adds Up To 16 Horsepower, With Million Mile Air Filter (Part No.57-1507)

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.71-1532)

K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Million Mile Air Filter (Part No.57-1532)

aFe POWER – Momentum HD Cold Air Intake: Gain up to 19 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-72003)

aFe POWER – Momentum HD Cold Air Intake: Gain up to 22 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.50-72002)

K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter (Part No.71-1533)

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9932B)

aFe POWER – Momentum HD Cold Air Intake: Gain up to 19 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.50-72003)

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 7 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-80072-1)

aFe POWER – QUANTUM Cold Air Intake: Gain up to 8 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.53-10001R)

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9934B)

aFe POWER – QUANTUM Cold Air Intake: Gain up to 3 Horsepower! Dry Air Filter For Easy Maintenance (Part No.53-10001D)

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9934K)

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 8 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-10112)

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.63-1562)

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 14 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12032)

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 5 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-31342-1)

Accel – Handheld Computer Programmer for Enhanced Performance and Tuning Control (Part No.49505)

NOS/Nitrous Oxide Systems – Diesel; Nitrous System (Part No.02519NOS)

aFe POWER – Power Module (Part No.77-42008)

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13130R)