2009 Dodge Ram 3500 Drivetrains

Essential 2009 Dodge Ram 3500 Drivetrains

SKF – PINION SEAL (Part No.J7010218369SKF)

PINION SEAL

from

$25.96
PINION SEAL

Carquest Premium – 4WD Switch (Part No.FWC1024)

4WD Switch

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

National – Shaft Repair Sleeve (Part No.99157)

Shaft Repair Sleeve

from

$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Steel Cover For Dana 70 (Part No.32322)

Steel Cover For Dana 70

from

$129.99
Product Features:
  • Fits Dana Spicer 70
  • Steel
See More

Yukon Gear – Locking Key / Wedge For Dana 60 & 70 Spindle Nut (Part No.33512)

Locking Key / Wedge For Dana 60 & 70 Spindle Nut

from

$29.99
Product Features:
  • Locking key/wedge
  • Fits Dana Spicer 60 and 70
See More

Spicer – Differential Ring and Pinion (Part No.708009-2)

Differential Ring and Pinion

from

$1037.99
All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – Pinion Yoke Dust Shield For Dana 60 & 70 (Part No.33441)

Pinion Yoke Dust Shield For Dana 60 & 70

from

$7.99
Product Features:
  • Pinion yoke dust shield
  • Fits Dana Spicer 60 and 70
See More

USA Standard Gear – TCaseShiftForkInsert (Part No.70666)

TCaseShiftForkInsert

from

$11.99
TCaseShiftForkInsert

Yukon Gear – Spin Free Locking Hub Conversion Kit For SRW Dana 60 94-99 Dodge (Part No.21727)

Spin Free Locking Hub Conversion Kit For SRW Dana 60 94-99 Dodge

from

$3278.99
Locking Hub Conversion Kit for ’94-’99 Dodge Dana 60. The Yukon worry free Spin Free Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation. This kit is not compatible with vehicles with 4-wheel ABS / Dual Rear Wheels.

Product Features:
  • Fits 1994-1999 Dodge one ton
  • Includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation.
  • Not compatible with four wheel ABS applications
See More

Yukon Gear – 11.5" GM Standard Open Side Gear Thrust Washer (Part No.33387)

11.5" GM Standard Open Side Gear Thrust Washer

from

$31.99
11.5″ GM standard Open side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 11.5″
See More

Spicer – U-Joint Kit (Part No.5006813)

U-Joint Kit

from

$94.99
U-Joint Kit (Spicer SPL Series for AAM 1485 series wheel joint) Lube for Life
See More

Yukon Gear – Limited Slip Dffrntl (Part No.26038)

Limited Slip Dffrntl

from

$939.99
Limited Slip Dffrntl

Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)

Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts

from

$30.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.

Product Features:
  • u-joint u-bolt kit
  • Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
  • 1310 u-joint size
  • Includes two u-bolts and four nuts
See More

Yukon Gear – Chrysler 11.5" Rear Axle Bearing And Seal Kit (Part No.10050)

Chrysler 11.5" Rear Axle Bearing And Seal Kit

from

$301.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. 03 & up 11.5AAM Dodge dual rear wheel (DRW) bearing & seal kit. This axle bearing & seal kit services one side only.

Product Features:
  • Fits Chrysler 11.5″ with dual rear wheels
  • Includes inner and outer bearings and races and axle seal
  • Services one side
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Dorman – Transfer Case Switch (Part No.J7101397467DOR)

Transfer Case Switch

from

$33.67
The harsh conditions underneath your car can degrade exposed parts. However, Dorman’s Transfer Case Switch resists corrosion and water intrusion, meaning that your Four-Wheel Drive smoothly and consistently engages.

Product Features:
  • Direct replacement for a proper fit every time
  • Easy to install
  • Weather-resistant for long-lasting use
  • Quality tested to ensure durability
See More

USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 80 In A 4.11 Ratio (Part No.36094)

Replacement Ring & Pinion Gear Set For Dana 80 In A 4.11 Ratio

from

$444.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits Dana Spicer 80
  • 11.25″ ring gear diameter
  • 37 spline pinion
  • 12 ring gear bolts
  • 4.11 ratio
See More

USA Standard Gear – Replacement Standard Spider Gear Set For Dana 70, 32 Spline (Part No.39010)

Replacement Standard Spider Gear Set For Dana 70, 32 Spline

from

$261.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 70, 32 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Replacement Pinion Nut For Dana 80 (Part No.33145)

Replacement Pinion Nut For Dana 80

from

$23.99
Replacement pinion nut for Dana 80, 1 7/8″ socket.

Product Features:
  • Pinion nut for Dana Spicer 80
  • 1 7/8″ socket
See More

Yukon Gear – Master Overhaul Kit For Dana 70-U Differential (Part No.14040)

Master Overhaul Kit For Dana 70-U Differential

from

$479.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Dana Spicer 70U
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers , thread locker, marking compound with brush, and gasket.
See More

Yukon Gear – Differential (Part No.26044)

Differential

from

$1119.99
Differential

Yukon Gear – Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U (Part No.55015)

Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U

from

$19.99
Product Features:
  • Pinion preload shims for Dana Spicer 60 and 70U
See More

Yukon Gear – Replacement Pinion Depth Shims For Dana 80 (Part No.55024)

Replacement Pinion Depth Shims For Dana 80

from

$68.99
Product Features:
  • Pinion depth shim kit
  • Fits Dana Spicer 80 4.125″ design
See More

National – Bearings (Part No.HM803110)

Bearings

from

$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.M804049)

Bearings

from

$38.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM804810)

Bearings

from

$28.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM88649)

Bearings

from

$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Popular 2009 Dodge Ram 3500 Drivetrains Categories

2009 Dodge Ram 3500 Drivetrains

You count on your 2009 Dodge Ram 3500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 317 Drivetrains ranging in price from $2.99 to $4,069.99, you’re sure to find everything you need for your 2009 Dodge Ram 3500.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 22 different brands like Moog, Spicer, and DriveWorks. 2009 Dodge Ram 3500 Drivetrains start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,640 extensive product reviews on 2009 Dodge Ram 3500 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Premium Universal Joint with 4.0 stars and Greaseable Premium Universal Joint with 4.6 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2009 Dodge Ram 3500 below to get started!

Top-Rated Drivetrains Brands For Your 2009 Dodge Ram 3500

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2009 Dodge Ram 3500 running right for years to come. In our inventory you’ll find brands like Moog, Spicer, DriveWorks, and even more.

Popular Idemitsu Drivetrains

You’ll find popular Idemitsu brand products across Differentials. All are waiting to get your 2009 Dodge Ram 3500 back on the road. Some of the top-rated Idemitsu products in these categories are:
Type TLS Automatic Transmission Fluid, 1 qt
from $14.49
(2)
Type TLS Automatic Transmission Fluid, 1 qt
Differential Oil

FAQs for 2009 Dodge Ram 3500 Drivetrains

What are the most purchased Drivetrains for the 2009 Dodge Ram 3500?

Out of 317 Drivetrains for the 2009 Dodge Ram 3500, the most popular in our inventory are:
Universal Joint
from $20.29
(52)
Universal Joint
U-Joints

What are the top-rated 2009 Dodge Ram 3500 Drivetrains?

Top-rated Drivetrains for your 2009 Dodge Ram 3500 based on customer reviews/ratings are:
Greaseable Premium Universal Joint
from $19.99
(31)
Greaseable Premium Universal Joint
“Good”
Greaseable Premium Universal Joint
from $59.99
(23)
Greaseable Premium Universal Joint
“Perfect fit. Badly needed and in stock.”
Bearings
from $22.99
(12)
Bearings
“Good parts”