2009 Chevrolet Express 2500 Wheels and Tires

Essential 2009 Chevrolet Express 2500 Wheels and Tires

ACDelco – Tire Pressure Monitoring System (TPMS) Sensor (Part No.20925924)

Tire Pressure Monitoring System (TPMS) Sensor

from

$114.99
ACDelco GM Original Equipment Tire Pressure Monitoring Sensors (TPMS) are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss), and are GM-recommended replacements for your vehicle’s original components. The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. These original equipment tire pressure monitoring sensors have bn manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Battery is made to last up to 10 years of normal use
  • Designed to communicate perfectly with your GM vehicle’s TPMS Module
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Schrader – TPMS Sensor Service Kit (Part No.20018)

TPMS Sensor Service Kit

from

$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
  • DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

National – Multi Purpose Seal (Part No.2081)

Multi Purpose Seal

from

$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Xtra Seal – Parts Kit For Chry/Gm (Part No.15-20201)

Parts Kit For Chry/Gm

from

$1.99
Parts Kit For Chry/Gm

Dorman – Hub And Bearing Mounting Bolts (Part No.917-519)

Hub And Bearing Mounting Bolts

from

$32.99
Wheel hub bolts rounded off or have damaged threads? These wheel hub bolts are designed to match the performance of original equipment bolts to secure the hub to the knuckle/spindle on specified vehicles.

Product Features:
  • Direct replacement – these wheel hub bolts are designed to match the performance of the original bolts on specified vehicles
  • Ideal solution – made of durable materials to reliably replace bolts with rounded-off or damaged threads
  • Application-specific – precision-manufactured to securely mount the hub to the vehicle knuckle/spindle
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)

Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers

from

$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:
  • MX-Sensor Components
  • 4 Metal Valves
  • 4 Rubber Valves
  • Rubber Gasket (2×10 pcs)
  • Screw Nut (2×10 pcs)
  • Washer (2×10 pcs)
  • Metal Valve Cap (2X10 pcs)
  • Rubber Valve Cap (2X10 pcs)
  • Valve Core (2X10 pcs)
See More

Dorman – Wheel Lug Nut Cover: M27-2.0 Thread, 22 mm Hex, 45 mm Depth, Plastic, Black (Sold by each) (Part No.611-622)

Wheel Lug Nut Cover: M27-2.0 Thread, 22 mm Hex, 45 mm Depth, Plastic, Black (Sold by each)

from

$2.49
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.

Product Features:
  • Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
  • Quality materials – manufactured for durability and a quality finish
  • Simple installation – no special tools required
  • Quality tested – this part has undergone dimensional testing to ensure a quality fit
See More

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-15243)

Tapered Cup Wheel Bearing Assembly

from

$8.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Dorman – Brake Dust Shield – 1 Pair (Part No.924-493)

Brake Dust Shield - 1 Pair

from

$88.99
Protect the braking system from debris and corrosive weather conditions with this rust-resistant replacement brake dust shield. Dimensional verification and salt spray testing ensures proper fit and extended service life.

Product Features:
  • Effective replacement – designed to match the fit and function of the stock brake dust shield on specific vehicle applications
  • Longer service life – corrosion-resistant steel construction protects brakes from elements and debris
  • Ideal fix – directly replaces highly deterioration-prone original part
  • Precision-engineered – has undergone dimensional verification and salt spray testing to ensure quality
See More

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Chrome Plated Valve Stem (Part No.VS-925-C)

Clamp-In TPMS Service Kit: Metal, 0.453 Inch Chrome Plated Valve Stem

from

$8.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, & tools.

Product Features:
  • Chrome clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
  • 0.453 in. rim hole compatibility
  • 200 PSI maximum cold inflation pressure
See More

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Acorn, 1.385" Length, Chrome, 1 Pack (Part No.611-185.1)

Wheel Lug Nut: M14-1.50 Thread, Conical 60, Acorn, 1.385" Length, Chrome, 1 Pack

from

$2.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – GM Original Equipment Wheel Hub (Part No.K7000440470ACD)

GM Original Equipment Wheel Hub

from

$402.12
An ACDelco GM Original Equipment Wheel Hub provides the attaching point for the brake rotor and road wheel. The wheel hub is supported and allowed to rotate by the wheel bearing. This original equipment wheel hub is engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors Get the GM quality you know and trust with ACDelco GM Original Equipment Bearings and Oil Seals. Stay with the brand of parts your vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Bearings and Oil Seals are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle. ACDelco offers a variety of bearings and seals for your GM vehicle, such as wheel hub bearings, generator/alternator bearings, front and rear wheel seals, rear axle seals, etc. When smooth, efficient performance is critical, choose ACDelco.

Product Features:
  • High quality materials ensure long service life
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – M14-1.50 Serrated Wheel Stud – 15.93mm Knurl, 46mm Length (Part No.610-330)

M14-1.50 Serrated Wheel Stud - 15.93mm Knurl, 46mm Length

from

$3.49
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Driveworks – Oil Seal (Part No.S-4740)

Oil Seal

from

$3.49
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

McGard – Black SplineDrive 5 Lug Wheel Installation Kit (M14 x 1.5 Thread Size) (Part No.65510BK)

Black SplineDrive 5 Lug Wheel Installation Kit (M14 x 1.5 Thread Size)

from

$299.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
See More

Autel – MX-Sensor 1-SensorM Bulk Box (20) (Part No.300060)

MX-Sensor 1-SensorM Bulk Box (20)

from

$525.99
Product Features:
  • Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve
  • Combined Frequency: 315MHz & 433MHz
  • Programmable with Autel TPMS Service Tools
  • Exclusive Press Release Button to Easily Replace Valve Stems
  • Program to Replace 99% of OE Sensors
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Meets SAE Standards J1205 & J1206
  • Maximum Signal Strength / Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Driveworks – Wheel Bearing and Hub Assembly with ABS Sensor (Part No.NT515036)

Wheel Bearing and Hub Assembly with ABS Sensor

from

$126.99
Driveworks Wheel hub assemblies & Bearings are integrated designed, they will meet your specific vehicle application and also provide the same or better performance, durability, and reliability you expect from OE. The inside ball or tapered bearing sealed with lifetime lubrication supports the vehicle’s rolling weight and provides a smooth and quiet rotation of the wheel. The design also enables lower total system cost, easier installation and longer service lifetime. The Wheel hub assemblies & Bearings come complete with new wheel studs, hub and bearings. The assembly also includes new ABS Wheel Sensors where applicable.

Product Features:
  • High quality materials ensure long service life
  • Integral raceway provides proper clearance between the roller and bearing riding surfaces
  • Precision-matched components deliver smooth and quiet operation
  • Broad range of designs and custom-tailored to specific applications and operating conditions
  • ABS Components and Bearing Preload 100% Tested To OE Specs
  • Premium seals, both inboard and outboard, protect the bearing
  • Brand may vary by location
See More

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.515036)

Hub and Bearing Assembly

from

$182.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
  • EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
  • EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
  • CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • DAMAGE RESISTANCE — Abrasion-resistant ABS cord resists damage, contamination and vibration that may lead to premature wear
See More

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Bulge, 0.87" Length, Chrome, 4 Locks/1 Key (Part No.711-626)

Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Bulge, 0.87" Length, Chrome, 4 Locks/1 Key

from

$20.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 2.05" L, Chrome, 4 Locks/1 Key (Part No.711-624)

Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 2.05" L, Chrome, 4 Locks/1 Key

from

$19.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Outer Wheel Bearing Retaining Snap Ring For GM 14T (Part No.33370)

Outer Wheel Bearing Retaining Snap Ring For GM 14T

from

$49.99
Outer wheel bearing retaining snap ring for GM 14T.

Product Features:
  • Outer wheel bearing retaining snap ring
  • Fits GM 10.5″ 14 bolt truck
See More

Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)

TPMS Ni Plated Valve Core, 100 Pack

from

$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
  • DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

National – Multi Purpose Bearing (Part No.RP-1561-GM)

Multi Purpose Bearing

from

$54.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Designed to be used on worn axle shafts
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Premium double seal design keeps out dirt and contaminants and retains lubrication
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.A-38)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Tapered Cone Wheel Bearing Assembly (Part No.S-387-AS)

Tapered Cone Wheel Bearing Assembly

from

$16.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Duplex Acorn, 1.873" Length, Chrome, 1 Pack (Part No.611-187.1)

Wheel Lug Nut: M14-1.50 Thread, Conical 60, Duplex Acorn, 1.873" Length, Chrome, 1 Pack

from

$3.29
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Acorn, 1.38" Length, Chrome (Sold by each) (Part No.611-185)

Wheel Lug Nut: M14-1.50 Thread, Conical 60, Acorn, 1.38" Length, Chrome (Sold by each)

from

$3.29
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Pik-a-Nut – Wheel Lug Nut: M14-1.50 External Thread, Conical 60, Thread, 1.122" L, Yellow; Zinc Plated, 1 Pack (Part No.99918.1)

Wheel Lug Nut: M14-1.50 External Thread, Conical 60, Thread, 1.122" L, Yellow; Zinc Plated, 1 Pack

from

$3.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

2009 Chevrolet Express 2500 Wheels and Tires

You count on your 2009 Chevrolet Express 2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 131 Wheels and Tires ranging in price from $1.99 to $7,321.99, you’re sure to find everything you need for your 2009 Chevrolet Express 2500.

Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 16 different brands like Dorman, Autel, and Schrader. 2009 Chevrolet Express 2500 Wheels and Tires start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 1,582 extensive product reviews on 2009 Chevrolet Express 2500 Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are VDO Metal Clamp-in Stem REDI-Sensor with 4.5 stars and Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 1.42" L, Chrome, 4 Locks/1 Key with 2.7 stars.

Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2009 Chevrolet Express 2500 below to get started!

Top-Rated Wheels and Tires Brands For Your 2009 Chevrolet Express 2500

Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2009 Chevrolet Express 2500 running right for years to come. In our inventory you’ll find brands like Dorman, Autel, Schrader, and even more.

Popular MOOG Hub Assemblies Wheels and Tires

You’ll find popular MOOG Hub Assemblies brand products across Wheel Bearings. All are waiting to get your 2009 Chevrolet Express 2500 back on the road. Some of the top-rated MOOG Hub Assemblies products in these categories are:
Hub and Bearing Assembly
from $223.99
(16)
Hub and Bearing Assembly
Front Wheel Bearings

Top-Rated Schrader Wheels and Tires


If Schrader are what you’re looking for, our inventory holds plenty. We stock Schrader brand Wheels and Tires for your 2009 Chevrolet Express 2500, and some of our most reviewed Schrader parts include:
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
from $41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
TPMS Sensor Service Kit
from $3.49
(9)
TPMS Sensor Service Kit
Tire Pressure Sensor Valves
TPMS Sensor Service Kit
from $3.49
(4)
TPMS Sensor Service Kit
TPMS Programmable Sensor Service Kits

FAQs for 2009 Chevrolet Express 2500 Wheels and Tires

What are the most purchased Wheels and Tires for the 2009 Chevrolet Express 2500?

Out of 131 Wheels and Tires for the 2009 Chevrolet Express 2500, the most popular in our inventory are:
MX-Sensor 1-Sensor (Rubber)
from $41.99
This product is not rated
MX-Sensor 1-Sensor (Rubber)
Tire Pressure Sensors
Wheel Stud: Serrated, M14-1.50 Thread Size, Right Hand Thread (Sold by each)
from $2.49
This product is not rated
Wheel Stud: Serrated, M14-1.50 Thread Size, Right Hand Thread (Sold by each)
Wheel Studs

What are the top-rated 2009 Chevrolet Express 2500 Wheels and Tires?

Top-rated Wheels and Tires for your 2009 Chevrolet Express 2500 based on customer reviews/ratings are:
VDO Metal Clamp-in Stem REDI-Sensor
from $48.99
(54)
VDO Metal Clamp-in Stem REDI-Sensor
“It works perfectly ! Will buy again for my Acura MDX Thanks to advanceautoparts.”
VDO Rubber Snap-in Stem REDI-Sensor
from $49.99
(26)
VDO Rubber Snap-in Stem REDI-Sensor
“Good quality and price for this Tire Pressure Monitoring Sensor.”