from

$6.79

Product Features:

Brand may vary by location

from

$59.99

New Platinum Pro Automatic Transmission Oil Cooler Assembly

Product Features:

Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$12.99

AT OIL PAN GASKET

from

$14.18

AT Output Shaft Seal

from

$72.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles..

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$49.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$16.78

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 70 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair
Low swell in hydrocarbon fluids

from

$83.99

This transaxle input speed sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this transaxle input speed sensor is designed to match the fit and function of the original sensor on specified vehicles
Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2901.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$40.49

When the transmission linkage clips break on many Ford, Lincoln and Mercury vehicles, you usually have to replace the entire shifter cable assembly. This Dorman OE FIX clip allows direct replacement of only the failed original clip, saving money.

Product Features:

Smart fix – this direct replacement shift linkage clip saves time and money by directly replacing the failure-prone clip on many Ford, Lincoln and Mercury vehicles
Effective alternative – allows you to restore shifter mechanism operation without replacing the entire shifter cable assembly
Application specific – made for certain Ford, Lincoln and Mercury vehicles
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$16.99

Ditch the wrenches and rags and get this Dorman Twist Drain oil drain plug. It’s specially designed to simplify changing your oil by replacing your factory plug with a tool-free, clean and easy solution. Just push, twist and drain. It also features a custom tapered O-ring that ensures a leak-proof seal, and is finished with electrophoresis and anodization for rust resistance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Simplifies service – this trademark Dorman Twist Drain plug replaces the original equipment oil drain plug and allows for cleaner and easier oil changes
Tool-free solution – eliminates need for wrench to drain oil pan; simply push, twist and drain
Leak resistant – proprietary inner seal handles high pressure and temperature to prevent leaks
Corrosion resistant – specially coated to avoid rust for a long service life

from

$49.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 13-21; LINCOLN 13-21; VOLVO 11-15;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2011-2021
Weight approx: 3 Lbs

from

$12.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$382.15

Dorman’s OE FIX repair solution addresses a common failure mode found in the original Transmission Control Module (TEHCM) design. The original TEHCM design uses a material called Kapton for its pressure switch film; that is not durable enough to maintain its proper form when the TEHCM becomes contaminated. All Dorman’s TEHCMs are completely remanufactured using a material called Polyether Ether Ketone, also known as PEEK. PEEK is a form of plastic that is resistant to thermal decomposition and remains in its original form with it comes in contact with debris. Additionally, our TEHCM units include 100% replacement of gaskets, grommets, and seals for a complete repair.

Product Features:

Software Transfer Tool included with every GM TEHCM unit, eliminating a costly trip to the Dealer
Direct replacement restores the ability to shift the vehicle in and out of gear without hesitation or rough shift
Fully remanufactured and vehicle simulator tested for durability and quality assurance
Includes upgraded materials

from

$59.99

This transaxle output speed sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this transaxle output speed sensor is designed to match the fit and function of the original sensor on specified vehicles
Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$23.29

Product Features:

Transmission line fitting kit
Ford; 5/8″-18 inverted flare, deep thread
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Hose clamps required

from

$32.49

Product Features:

Transmission line fitting kit
Ford; 1/2″-20 inverted flare, deep thread
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Hose clamps required

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$52.99

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$18.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$67.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 07-10; LINCOLN 07-10;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2007-2010
Weight approx: 2 Lbs

from

$81.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 11-14; LINCOLN 11-15;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2011-2015
Weight approx: 2 Lbs

from

$322.99

This transmission control module has been fully tested and validated to match the function and performance of the original TCM on specified vehicle applications.

Product Features:

Direct replacement – this transmission control module matches the function and performance of the stock TCM on specified years, makes and models
Ideal solution – this transmission control module is a reliable replacement for an original part that has failed due to corrosion or electrical failure
Thoroughly tested – this TCM has undergone full vehicle simulator testing to confirm full functionality for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience