2006 Ford Fusion Ignition and Tune-Up Products
More 2006 Ford Fusion Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2006 Ford Fusion, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2006 Ford Fusion Ignition and Tune-Up Products
Idemitsu – Type M Automatic Transmission Fluid – 1 qt (Part No.10113-042P)
from
$14.99
Formulated to meet the specific requirements of Mazda vehicles equipped with conventional (non-CVT) transmissions that require the use of Mazda Type M3 and M5 ATF. Recommended for service-fill in all Mazda automatic transmissions where M5 or M3 ATF is specified. This fluid is also recommended for certain Ford vehicles where M5 ATF is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
Carquest Premium – Ignition Switch (Part No.CSC1044)
from
$70.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Motorcraft – Ignition Switch (Part No.M5050485141MTR)
from
$81.82
Ignition Switch
Carquest Premium – Door Cylinder Anti-Theft Disarm Switch Connector (Part No.PTA1183)
from
$15.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Motorcraft – Direct Ignition Coil – (Coil on Plug) (Part No.F3005411036MTR)
from
$97.81
Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
- Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
- Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
- Radio-Frequency Interference (RFI) Suppression
- Magnets hold strength for the coil to maintain proper energy output
- Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
- Coil Housing is engineered to withstand extremes in temperature without cracking
Motorcraft – Direct Ignition Coil (Part No.F3005539043MTR)
from
$116.98
Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
- Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
- Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
- Radio-Frequency Interference (RFI) Suppression
- Magnets hold strength for the coil to maintain proper energy output
- Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
- Coil Housing is engineered to withstand extremes in temperature without cracking
Delphi – IGNITION COIL (Part No.GN10251)
from
$137.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
DENSO – Coil On Plug Boots-6 (Part No.671-6268)
from
$58.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
DENSO – Coil On Plug Boots-4 (Part No.671-4312)
from
$46.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
DENSO – Coil On Plug Boots-6 (Part No.671-6291)
from
$191.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
Accel – Spark Plugs (Part No.578C2-4)
from
$24.99
Spark Plugs
DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, ITV20TT (Part No.4719)
from
$10.99
Durability of an OE style plug combined with Power & Torque of high performance.
Product Features:
See More
Product Features:
- 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
- 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
- DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Durability of an OE style plug combined with Power & Torque of high performance.
- Withstands temperatures greater than 4000° Fahrenheit
- Iridium TT
Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP104)
from
$4.79
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Platinum spark plugs provide a center wire platinum firing tip which provides reduced gap erosion, fewer misfires, better performance and increased durability. Consider upgrading to Autolite Double Platinum or Iridium XP spark plugs for increased performance.
Product Features:
See More
Product Features:
- High nickel alloy side electrode maintains precise gap
- Full platinum tip assures virtually no gap erosion for long life
- Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7102)
from
$7.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Motorcraft – Original Equipment Spark Plug Boot: Stainless steel Core, Qty of 1 (Part No.WR-6135)
from
$15.99
Motorcraft Ignition Boots are engineered to provide original equipment performance and reliability. All Motorcraft parts undergo rigorous lab and real-world tests in order to meet strict Ford engineering standards. Terminal ends are designed to help ensure they do not separate from the cable under normal service conditions. High dialectic insulation helps maintain and control voltage delivery while reducing radio frequency interference. The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles
Product Features:
See More
Product Features:
- Backed by Motorcraft’s Service Parts Warranty
- Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
- Optimized wire lengths help minimize part numbers while still providing proper fit.
- Wires are optimum lengths for easy installation.
- EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
- Motorcraft ignition components help prevent false check engine lights.
Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-015MMP)
from
$26.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
NGK – Coil on Plug Boot (Part No.58974)
from
$6.79
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7175)
from
$8.99
Coil On Plug Insulator Boot: Spring included, Designed for direct fit
Motorcraft – Original Equipment Spark Plug Boot: No core (outer material Rubber) Core, Qty of 1 (Part No.WR-6134)
from
$21.99
Motorcraft Plug Wires are Manufactured of premium-quality materials to strict Ford Engineering standards. High-Dielectric Insulation helps maintain and control voltage delivery while reducing Radio Frequency Interference. EPDM/Silicone wire jacket, spark plug & coil/ distributor insulators help protect against oil and high temperatures. Optimized wire lengths help minimize part numbers while still providing proper fit. Designed and Tested to Stringent Ford Standards.
Product Features:
See More
Product Features:
- Backed by Motorcraft’s Service Parts Warranty
- Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
- Optimized wire lengths help minimize part numbers while still providing proper fit.
- Wires are optimum lengths for easy installation.
- EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
- Motorcraft ignition components help prevent false check engine lights.
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3736)
from
$33.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Knock Sensor (Part No.EKC1009)
from
$34.49
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Knock Sensor (Part No.SBC3882)
from
$58.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Ignition Switch Connector (Part No.PTC1725)
from
$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1003)
from
$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
NGK – Coil on Plug Boot (Part No.58973)
from
$7.79
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
Dorman – Help – Spark Plug Boot (Part No.49818)
from
$24.49
Spark plug coil boot deteriorated or damaged? This replacement boot matches the fit and function of the original part on specified years, make and models. This boot is made from quality materials to resist damage from heat and oil saturation.
Product Features:
See More
Product Features:
- Ideal replacement – this spark plug coil boot directly replaces the boot on specified vehicle years, makes and models
- Durable construction – this spark plug coil boot is made from a tough rubber material that is resistant to damage from exposure to heat and oil saturation
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7012)
from
$6.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
NGK – Coil on Plug Boot (Part No.58978)
from
$6.29
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
Popular 2006 Ford Fusion Ignition and Tune-Up Products Categories
2006 Ford Fusion Ignition and Tune-Up Products
You count on your 2006 Ford Fusion to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 74 Ignition and Tune-Up Products ranging in price from $2.99 to $165.99, you’re sure to find everything you need for your 2006 Ford Fusion.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 14 different brands like Autolite, NGK, and E3. 2006 Ford Fusion Ignition and Tune-Up Products start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 4,005 extensive product reviews on 2006 Ford Fusion Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Iridium IX Spark Plug: Single Iridium Fine Wire, TR55IX with 4.8 stars and PT16TT Platinum TT Spark Plug with 4.6 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2006 Ford Fusion below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2006 Ford Fusion
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Ford Fusion running right for years to come. In our inventory you’ll find brands like Autolite, NGK, E3, and even more.
Popular Motorcraft Ignition and Tune-Up Products
You’ll find popular Motorcraft brand products across Spark Plugs. All are waiting to get your 2006 Ford Fusion back on the road. Some of the top-rated Motorcraft products in these categories are:
from
$142.99
(1)
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
Top-Rated Autolite Ignition and Tune-Up Products
If Autolite are what you’re looking for, our inventory holds plenty. We stock Autolite brand Ignition and Tune-Up Products for your 2006 Ford Fusion, and some of our most reviewed Autolite parts include:
from
$4.79
(203)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
Spark Plugs
from
$6.79
(96)
Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life
Spark Plugs
from
$3.49
(67)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
Spark Plugs
FAQs for 2006 Ford Fusion Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2006 Ford Fusion?
Out of 74 Ignition and Tune-Up Products for the 2006 Ford Fusion, the most popular in our inventory are:
What are the top-rated 2006 Ford Fusion Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2006 Ford Fusion based on customer reviews/ratings are:
from
$5.99
(90)
PT16TT Platinum TT Spark Plug
“I purchased the parts required to tune up a 89 Ford Mustang. The auto runs much better since installing the parts purchased from Advanced .”
