Name: Remanufactured Fuel Injection Control Module (FICM)
Brand: Carquest Premium
SKU: AE11242
Price: 531.99 USD
Rating: 1.0 (1 reviews)

from

$531.99

CARQUEST premium Fuel Injection Control Module (FICM) for the Ford Power Stroke 6.0L is completely disassembled and all electronic components are tested. Common failure points in the original design are corrected. All defective components are replaced with upgraded components. The unit is pre-programmed with the latest software available which improves injector operation (NO REFLASH REQUIRED). Each unit is 100% tested under multiple operating conditions prior to shipment. Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation.

Product Features:

Each unit is 100% tested to OE specifications
Preprogrammed plug-and-play ready which reduces installation time and cost
Upgraded module prevents common failure modes inherent with OE design
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$224.05

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Allows you to replace only faulty power supply instead of entire fuel injection control module assembly
100% new, not remanufactured, so there’s no leftover debris that may cause failure
Re-engineered circuit board layout
Higher-quality electronics protect critical components from excess heat that can lead to failure

from

$34.49

This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$14.29

The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can lead to combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:

Original equipment fit, form and function

from

$14.05

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Direct fit replacement provides proper fit, form, and function
Quality-engineered replacement for faulty OE part, which can fail from improper installation and wear-and-tear from carbon buildup
Constructed from reinforced brass to seal and protect immediate area of injector bore within cylinder head
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$322.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Fuel Injector Assembly consists of a cylindrical housing with an electric solenoid-controlled plunger valve mounted inside
When the solenoid is electrically actuated by the engine control module, the plunger valve opens, allowing fuel to reach the spray head that injects atomized fuel into the cylinder to be mixed with oxygen for combustion.
The resulting explosive air/fuel mixture is compressed by the upward moving piston and ignited by a spark plug or glow plug to power the engine.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into every Motorcraft Fuel Injector Assembly, ensuring the most current technology.
Motorcraft Fuel Injector Assemblies are built to last: corrosion resistant, pressure-tested and engineered to perform under extreme conditions and meet Ford’s exacting OE specifications, performance and quality standards.

from

$29.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$15.03

Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind

Product Features:

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

from

$11.49

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$3.99

Fuel Injection Idle Air Control Valve Gasket

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Each gasket set is built to meet or exceed all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$12.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$8.61

Fuel Injector O-Ring

from

$131.99

Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.

Product Features:

BSE mass air flow sensors are 100% tested to perform like new. OEM designs are analyzed, and design upgrades are implemented when necessary to provide improved durability over the OEM design.
Sensors are validated for extended run, extreme hot and cold, over-voltage, over-current, and shock and vibration.
Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions.
All parts are THE ORIGINAL parts your car was built with. All parts are validated for on car fit, form, and function.

from

$115.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$89.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$21.99

Complete injector seal kit includes all six components necessary to properly reseal injector when reinstalled. All parts in kit are manufactured using premium OE quality materials.

Product Features:

Includes pink and blue high-pressure oil seals, black square oil seal, steel back-up ring, orange fuel seal and copper combustion seal
Premium OE quality materials
Services one injector

from

$14.29

Complete injector seal kit includes all seven components necessary to properly reseal injector when installed. All parts in kit are manufactured using premium OE quality materials.

Product Features:

Kit includes top high-pressure oil inlet seal and metal C clip, two injector body O-rings, copper combustion seal and two electrical plug seals
Premium OE quality materials
Services one injector

from

$8.29

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$62.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our fuel pressure regulators are application specific for the perfect fit and form
A robust engineering design for greater resistance to leakage
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$234.99

Fuel Injection Pressure Regulator

from

$81.99

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Complete kit comes with everything needed to rebuild the fuel filter housing after a weakened stock spring causes hard starting, stalling, poor fuel mileage, and poor acceleration
Includes fuel pressure regulator, gasket, O-rings, and hardware for ease of installation
Once installed, the new fuel pressure regulator will Increase fuel pressure by 10-15 PSI, maximizing performance and injector life
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$58.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$63.55

Fuel Injector

from

$48.49

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$257.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes 100% replacement of the solenoids which eliminates wire insulation cracking and coil failure in the field
Includes 100% replacement of connector which ensures proper connection to vehicle wiring harness and proper fit and sealing through valve cover
Spool valves and housing are 100% leak and flow tested to meet or exceed OE specifications
New spool valves are designed with updated features to reduce injector stiction
Precision ground nozzles are 100% flow tested to ensure accurate and precise fuel delivery
Includes all new premium quality O-rings and seals
Includes copper combustion gasket
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$45.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features: