2005 Ford Ranger Clutch Systems

Essential Clutch Systems for 2005 Ford Rangers

Exedy – Clutch Disc (Part No.I2010147151DKN)

Clutch Disc

from

$189.53
EXEDY Engineers develop, perfect and manufacture our own friction materials. We produce a material with exceptional friction and wear characteristics that will help engage smoothly, grip as expected and provide you with a longer lasting installation. Disc Spring Dampers: This is the center section of the clutch disc. EXEDY spring-type disc dampers are patented worldwide to suppress engine and driveline noise by absorbing vibrations.

Product Features:
  • OE Quality
  • Direct fit application
  • Noise and vibration reduction technology reduces gear noise providing a quite smooth ride
  • Wide angle damper design enables the clutch disc to hold more torque with less force
  • Quiet pre-damper mechanism reduces gear noise during engine idle
See More

ATP – Automatic Transmission Flex Plate (Part No.Z-192)

Automatic Transmission Flex Plate

from

$88.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

LuK – OE Quality Flywheel (Part No.LFW138)

OE Quality Flywheel

from

$87.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More

Sachs – Clutch Slave Cylinder (Part No.I3010289963SAC)

Clutch Slave Cylinder

from

$119.89
The Sachs Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC002B)

LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER

from

$75.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Richmond Gear – Differential Cross Shaft (Part No.80-0273-1)

Differential Cross Shaft

from

$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Richmond Gear – Differential Cross Shaft (Part No.CSPF88L)

Differential Cross Shaft

from

$26.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

LUK – Clutch Slave Cylinder (Part No.I3010836231LUK)

Clutch Slave Cylinder

from

$106.29
The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

LuK – Clutch Slave Cylinder (Part No.LSC001B)

Clutch Slave Cylinder

from

$239.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

ATP – FLYWHEEL SHIM (Part No.FS-1)

FLYWHEEL SHIM

from

$25.99
FLYWHEEL SHIM

ATP – FLYWHEEL SHIM (Part No.FS-4)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

National – Multi Purpose Bearing (Part No.614061)

Multi Purpose Bearing

from

$47.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Design improvements include extended life and quiet operation
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Clutch Release Bearing (Part No.S-614040)

Clutch Release Bearing

from

$24.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

ATP – ATP Manual Transmission Flywheel Ring Gear (Part No.ZA-542)

ATP Manual Transmission Flywheel Ring Gear

from

$50.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over And start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit And function just like the original part to ensure durability And long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Eliminates grinding from damaged teeth
  • Increases starter drive life
See More

ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-578)

Manual Transmission Flywheel Ring Gear

from

$34.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Eliminates grinding from damaged teeth
  • Increases starter drive life
See More

Exedy – OEM Pro Clutch Kit (Part No.I2030167655DKN)

OEM Pro Clutch Kit

from

$435.38
The EXEDY Pro-Kit clutch assembly you will receive is manufactured on the same production line as OEM clutch components! Clutch cover assemblies (pressure plates): All cover assemblies endure a precise robotic testing process to ensure proper clamp load and clutch lift separation. This step ensures optimal pedal feel for better drivability. To help guarantee durability, the diaphragm spring (dark fingers in the center) receives special high frequency induction heat treating. This helps prevent the wear that normally occurs at the contact surface of the release bearing. Together, these procedures provide you a like-new pedal feel throughout the life of your clutch. Clutch Discs: EXEDY Engineers develop, perfect and manufacture our own friction materials. We produce a material with exceptional friction and wear characteristics that will help engage smoothly, grip as expected and provide you with a longer lasting installation. Disc Spring Dampers: This is the center section of the clutch disc. EXEDY spring-type disc dampers are patented worldwide to suppress engine and driveline noise by absorbing vibrations. Vehicle-specific designs let you enjoy your ride without compromise.

Product Features:
  • Original Equipment Replacement.
  • Direct fit application.
  • True OE friction plates and steels.
  • Contains all necessary components
See More

Sachs – Super Set Clutch Kit (Part No.I2030181749SAC)

Super Set Clutch Kit

from

$428.48
As an OE clutch, clutch system and component supplier, Sachs products are developed to meet the highest demands of the worlds’s leading car manufacturers. With a complete program to satisfy a one-stop-shop need for complete clutch system replacement parts, unsurpassed quality and unmatched Asian, Domestic and European coverage, SACHS brand confirms itself as the premier OE clutch product available to the aftermarket. In order to reduce installation time, SACHS Super Set Clutch Kits come with everything needed for installations. All kits included in the catalog have also been tested to meet or exceed OE specifications and cycle tested in order to reduce returns.

Product Features:
  • OE Quality and direct fit application.
  • Original Equipment Supplier
  • Clutch kit contains; disc, pressure plate, release bearing and pilot bearing when required.
  • Most complete clutch kit line offering in the industry
  • Unmatched Asian, Domestic and European coverage
  • Exclusive parts not available through other suppliers
  • Complete range of complimentary parts and upgrades
See More

Dorman – Clutch Pilot Bearing (Part No.690-050.1)

Clutch Pilot Bearing

from

$9.99
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Clutch Pilot Bearing, Needle Bearing (Part No.S-FC65354)

Clutch Pilot Bearing, Needle Bearing

from

$5.49
Product Features:
  • Brand may vary by location
See More

Dorman – Pilot Bearing (Part No.I1010831589DOR)

Pilot Bearing

from

$26.90
Dorman’s Clutch Pilot Bearing extends the life of the transmission and helps ensures smooth, reliable shift quality. Replacement recommended during clutch replacement.

Product Features:
  • Direct replacement for a proper fit every time
  • High quality metal construction
  • Ensures transmission longevity
  • Replacement reduces driveline noise and vibration
See More

LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS028)

Pre-Filled Hydraulic Clutch Release System

from

$198.99
For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.
See More

LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS004)

Pre-Filled Hydraulic Clutch Release System

from

$353.99
For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.
See More

LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS027)

Pre-Filled Hydraulic Clutch Release System

from

$209.99
For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.
See More

LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS025)

Pre-Filled Hydraulic Clutch Release System

from

$252.99
For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.
See More

LuK – Clutch Master Cylinder (Part No.LMC166)

Clutch Master Cylinder

from

$55.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Sachs – Clutch Master Cylinder (Part No.I3000329241SAC)

Clutch Master Cylinder

from

$86.65
The Sachs Clutch Master Cylinder is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

LuK – Clutch Master Cylinder (Part No.LMC169)

Clutch Master Cylinder

from

$81.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LuK – Clutch Master Cylinder (Part No.LMC183)

Clutch Master Cylinder

from

$70.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Upgrade your 2005 Ford Ranger with Top-Quality Clutch Systems

When it comes to maintaining or upgrading your 2005 Ford Ranger, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Clutch Systems are key to keeping your Ranger functioning at its best. At Advance Auto Parts, we offer a wide selection of 34 Clutch Systems for the 2005 Ford Ranger, designed to meet your needs without breaking the bank. From Clutch Kit replacements to Clutch Master Cylinders upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 2005 Ford Ranger at great prices. Our Clutch Systems inventory for this model ranges from just $5.49 to $435.38, with an average price of $107.90. Our 34 Clutch Systems in stock come from 8 trusted brands, so you’re sure to find the right part for your 2005 Ford Ranger without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Ford Ranger, we stock popular OEM and aftermarket Clutch Systems from top names like LuK, National, ATP, and more. LuK Clutch Systems start at just $58.99 and boast an impressive 4 stars average rating from customers. National and ATP also bring quality to the table, with Clutch Systems available starting at $8.49, and at an average 4 stars rating. With 32 customer reviews and counting, our 2005 Ford Ranger Clutch Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Ford Ranger is always ready to roll. We’re committed to providing you with everything you need to keep your Ranger in top shape, all in one place. Start shopping confidently below for your 2005 Ford Ranger!

Best-Selling Clutch Kits for 2005 Ford Rangers

Enhance the driving experience in your Ford with 4 quality Clutch Kit components, starting at $206.99.

LuK – Clutch Kit: 9 1/8" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline (Part No.07-140)

Clutch Kit: 9 1/8" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline

from

$206.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – Clutch Kit: 10 1/8" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline (Part No.07-167)

Clutch Kit: 10 1/8" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline

from

$275.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

Exedy – OEM Pro Clutch Kit (Part No.I2030167655DKN)

OEM Pro Clutch Kit

from

$435.38
The EXEDY Pro-Kit clutch assembly you will receive is manufactured on the same production line as OEM clutch components! Clutch cover assemblies (pressure plates): All cover assemblies endure a precise robotic testing process to ensure proper clamp load and clutch lift separation. This step ensures optimal pedal feel for better drivability. To help guarantee durability, the diaphragm spring (dark fingers in the center) receives special high frequency induction heat treating. This helps prevent the wear that normally occurs at the contact surface of the release bearing. Together, these procedures provide you a like-new pedal feel throughout the life of your clutch. Clutch Discs: EXEDY Engineers develop, perfect and manufacture our own friction materials. We produce a material with exceptional friction and wear characteristics that will help engage smoothly, grip as expected and provide you with a longer lasting installation. Disc Spring Dampers: This is the center section of the clutch disc. EXEDY spring-type disc dampers are patented worldwide to suppress engine and driveline noise by absorbing vibrations. Vehicle-specific designs let you enjoy your ride without compromise.

Product Features:
  • Original Equipment Replacement.
  • Direct fit application.
  • True OE friction plates and steels.
  • Contains all necessary components
See More

Sachs – Super Set Clutch Kit (Part No.I2030181749SAC)

Super Set Clutch Kit

from

$428.48
As an OE clutch, clutch system and component supplier, Sachs products are developed to meet the highest demands of the worlds’s leading car manufacturers. With a complete program to satisfy a one-stop-shop need for complete clutch system replacement parts, unsurpassed quality and unmatched Asian, Domestic and European coverage, SACHS brand confirms itself as the premier OE clutch product available to the aftermarket. In order to reduce installation time, SACHS Super Set Clutch Kits come with everything needed for installations. All kits included in the catalog have also been tested to meet or exceed OE specifications and cycle tested in order to reduce returns.

Product Features:
  • OE Quality and direct fit application.
  • Original Equipment Supplier
  • Clutch kit contains; disc, pressure plate, release bearing and pilot bearing when required.
  • Most complete clutch kit line offering in the industry
  • Unmatched Asian, Domestic and European coverage
  • Exclusive parts not available through other suppliers
  • Complete range of complimentary parts and upgrades
See More

Most Popular 2005 Ford Ranger Clutch Master Cylinders

Customize your Ford with 3 Clutch Master Cylinders products like Clutch Master Cylinders and Clutch Master Cylinder and Line Assemblies, all priced under $252.99.

LuK – Clutch Master Cylinder (Part No.LMC400)

Clutch Master Cylinder

from

$58.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Sachs – Clutch Master and Slave Cylinder Assembly (Part No.I3015937810SAC)

Clutch Master and Slave Cylinder Assembly

from

$150.37
The Sachs Clutch Master and Slave Cylinder Assembly saves time, money and labor. The Sachs master/slave cylinder assembly is a direct OE replacement, providing an additional layer of ease and convenience.

Product Features:
  • OE Quality
  • Durably constructed of reinforced nylon, cast iron or aluminum for a long service life
  • Contains high quality EPDM rubber components for compatibility with brake fluid
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS025)

Pre-Filled Hydraulic Clutch Release System

from

$252.99
For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.
See More

Top Picks for 2005 Ford Ranger Flywheels

Upgrade Ford Rangers with top-quality Flywheels parts, including 16 OEM and aftermarket selections for your 2005 model.

ATP – ATP Automatic Transmission Flex Plate (Part No.Z-189)

ATP Automatic Transmission Flex Plate

from

$92.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

ATP – Automatic Transmission Flexplate (Part No.Z-484)

Automatic Transmission Flexplate

from

$113.99
Automatic Transmission Flexplate

LuK – OE Quality Flywheel (Part No.LFW160)

OE Quality Flywheel

from

$93.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More

LuK – OE Quality Flywheel (Part No.LFW138)

OE Quality Flywheel

from

$87.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More

ATP – ATP Manual Transmission Flywheel Ring Gear (Part No.ZA-542)

ATP Manual Transmission Flywheel Ring Gear

from

$50.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over And start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit And function just like the original part to ensure durability And long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Eliminates grinding from damaged teeth
  • Increases starter drive life
See More

LUK – Flywheel (Part No.I1000835831LUK)

Flywheel

from

$167.04
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.

Product Features:
  • OE quality and direct fit application
  • Made from high quality steel
  • Designed to reduce clutch chatter and vibration
  • Dynamically balanced
See More

ATP – FLYWHEEL SHIM (Part No.FS-4)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

ATP – FLYWHEEL SHIM (Part No.FS-1)

FLYWHEEL SHIM

from

$25.99
FLYWHEEL SHIM

ATP – M/T FLYWHEEL (Part No.Z-309)

M/T FLYWHEEL

from

$245.99
M/T FLYWHEEL

Sachs – Sachs Flywheel (Part No.I1000201871SAC)

Sachs Flywheel

from

$186.74
Sachs Flywheels are made from high quality steel forging and are designed to meet or exceed the manufacturers specifications for quality and performance.

Product Features:
  • OE quality and direct fit application
  • Made from high quality steel
  • Designed to reduce clutch chatter and vibration
  • Dynamically balanced
See More

ATP – M/T FLYWHEEL (Part No.Z-376)

M/T FLYWHEEL

from

$179.99
M/T FLYWHEEL

LUK – Flywheel (Part No.I1000835733LUK)

Flywheel

from

$140.44
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.

Product Features:
  • OE quality and direct fit application
  • Made from high quality steel
  • Designed to reduce clutch chatter and vibration
  • Dynamically balanced
See More

LUK – Flywheel (Part No.I1000835741LUK)

Flywheel

from

$137.83
Flywheel

LuK – OE Quality Flywheel (Part No.LFW382)

OE Quality Flywheel

from

$132.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More

ATP – FLYWHEEL SHIM (Part No.FS-5)

FLYWHEEL SHIM

from

$25.99
FLYWHEEL SHIM

ATP – FLYWHEEL SHIM (Part No.FS-13)

FLYWHEEL SHIM

from

$15.99
FLYWHEEL SHIM

In-Demand Clutch Slave Cylinders for 2005 Ford Rangers

Select from 1 premium Clutch Slave Cylinders parts for your 2005 Ford Ranger.

LuK – Clutch Slave Cylinder (Part No.LSC003B)

Clutch Slave Cylinder

from

$77.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Most Sold 2005 Ford Ranger Clutch Release Bearings

Explore our best-selling Ford parts for the 2005 Ranger among 2 OEM and aftermarket options starting from $35.99.

LUK – Clutch Slave Cylinder (Part No.I3010836231LUK)

Clutch Slave Cylinder

from

$106.29
The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Driveworks – Clutch Release Bearing (Part No.S-614169)

Clutch Release Bearing

from

$35.99
Product Features:
  • Brand may vary by location
See More

Top-Rated Clutch Systems Brands For Your 2005 Ford Ranger

Shop for the best-rated brands offering Clutch Systems and other products for your 2005 Ford Rangers. Below you’ll find some of our best rated Clutch Systems from LuK, National, and ATP, and more. Clutch Systems from these brands that fit a 2005 Ranger start at just $8.49 and are rated as high as 4 stars. OEM and aftermarket Clutch Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular LuK 2005 Ford Ranger Clutch Systems

When it comes to maintaining or upgrading your 2005 Ford Ranger, using quality Clutch Systems is essential to ensure durability and a perfect fit. LuK ticks all of those boxes. We offer a wide selection of LuK Clutch Systems, specifically designed for the 2005 Ford Ranger. With over 12 LuK brand Clutch Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $58.99, with an average price of just $144.96. Plus, with over 2 customer reviews and an average rating of 4 stars, you can trust that our LuK Clutch Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

OE Quality Flywheel
from
$93.99
This product is not rated

OE Quality Flywheel

“”

Clutch Slave Cylinder
from
$77.99
This product is not rated

Clutch Slave Cylinder

“”

Clutch Master Cylinder
from
$58.99
This product is not rated

Clutch Master Cylinder

“”

Popular National 2005 Ford Ranger Clutch Systems

National auto parts is one of the highest quality Clutch System brands in the market. Any 2005 Ford Ranger owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2005 Ranger, Advance Auto Parts carries a full inventory of 2 National Clutch Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these National Clutch Systems range from $8.49 to $15.79, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Clutch Systems below will deliver on both quality and value.

Bearings
from
$8.49

(2)

Bearings

“If removing trans. this is a must to replace.”

Bearings
from
$15.79
This product is not rated

Bearings

“”

FAQs for 2005 Ford Ranger Clutch Systems

Which Clutch Systems are best-sellers for 2005 Ford Rangers?

Out of 34 Clutch Systems that fit 2005 Ford Rangers, the following parts are the top sellers:

What’s the price range for 2005 Ford Ranger Clutch Systems?

Clutch System prices for the 2005 Ford Ranger start at $5.49 and go up to $435.38 for the most premium parts.

What’s the average price of a Clutch System for a 2005 Ford Ranger?

The average price for Clutch Systems for the 2005 Ford Ranger is $107.90. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Clutch Systems for other Ford Ranger model years?

Yes, we currently carry Clutch Systems for 28 model years of Ford Rangers between 1983 and 2011. Clutch Systems are bought most frequently for the following model years: 2011, 2010, 2009, 2008, 2007, 2006, 2004, 2003, and 2002.

What are the cheapest Clutch Systems for my 2005 Ford Ranger?

The cheapest 2005 Ford Ranger Clutch Systems we carry in stock are:

What are the top-rated Clutch Systems that fit the 2005 Ford Ranger?

Out of 32 reviews by customers, our 2005 Ford Ranger Clutch Systems have an average customer rating of . These are some of the highest-rated Clutch System types for the 2005 Ford Ranger and their top-rated products:

What types of Clutch Systems do you sell for my 2005 Ford Ranger?

As of 2/5/25, these are some of the most in-demand types of Clutch Systems for a 2005 Ford Ranger:

Can I get help with 2005 Ford Ranger Clutch System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Clutch Systems and more.

What is your return policy for Ford Ranger Clutch Systems?

Advance Auto Parts keeps returns simple. For new Ford Ranger Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.