2005 Ford GT Cooling and Climate Controls

Essential Cooling and Climate Controls for 2005 Ford GTs

KAI – Grille Mounting Panel (Part No.FO1223107)

Grille Mounting Panel

from

$27.99
New Standard Replacement Upper Grille Mounting Panel, Attaches To Radiator Support

Product Features:
  • Attaches To Radiator Support
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1011)

Multi-Use Connector

from

$26.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Motorcraft – Radiator Cap (Part No.RS-527)

Radiator Cap

from

$12.29
Radiator Cap

Carquest Premium – Heavy Duty Thermostat: With Seal, 180 Degrees (Part No.15228)

Heavy Duty Thermostat: With Seal, 180 Degrees

from

$50.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Factory Air – System Mounted Binary Pressure Switch (Part No.20052)

System Mounted Binary Pressure Switch

from

$60.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Carquest Premium – Cylinder Head Temperature Sensor (Part No.WTA2392)

Cylinder Head Temperature Sensor

from

$12.99
Carquest Coolant Temperature Sensors provide accurate data to the PCM to ensure proper management of your vehicle’s fuel injection system, ignition and variable valve timing, transmission shifting, and more. Manufactured using the highest quality OEM approved materials for increased durability in even the most extreme temperatures. All Carquest Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:


    Product Features:
    • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
    • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
    • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
    • OE precision matched thermistor position for correct output parameters
    • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
See More

Carquest Premium – Engine Cooling Fan Resistor (Part No.WTC2223)

Engine Cooling Fan Resistor

from

$50.99
The Engine Cooling Fan Resistor is part of the radiator and A/C condenser fan system operation. The engine computer will use the resistor to control the operating speed of the fan motor to achieve a lower fan speed during certain vehicle operating conditions.

Product Features:
  • Application matched components ensure the cooling fan system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12029)

Radiator Cap Tester Adapter

from

$41.99
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1465)

Multi-Use Connector

from

$49.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Factory Air – System Mounted Cycling Pressure Switch (Part No.20957)

System Mounted Cycling Pressure Switch

from

$28.49
High quality OE replacement part with all components needed to complete the job.

Product Features:
  • Contains gaskets, o-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
  • Contains gaskets, o-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Carquest Premium – Multi-Purpose Relay (Part No.FCA1001)

Multi-Purpose Relay

from

$19.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – Multi-Purpose Relay (Part No.RAA1257)

Multi-Purpose Relay

from

$31.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Driveworks – Electrical Relay (Part No.83265)

Electrical Relay

from

$15.79
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Felpro – Engine Water Pump Bypass Pipe O-Ring Kit (Part No.ES 73048)

Engine Water Pump Bypass Pipe O-Ring Kit

from

$7.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Unsurpassed quality you can trust
See More

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ABA1035)

A/C Compressor Cut-Out Switch

from

$46.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The HVAC Pressure Sensor/Switch monitors the refrigerant pressure within the air conditioning system, ensuring optimal performance and preventing potential system damage, which enhances climate control and passenger comfort. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85279)

Coolant Housing/Water Outlet: Gasket Included

from

$64.99
We are proud to offer this Carquest product line: Carquest Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Direct-fit replacement for ease of installation
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Meets and/or exceeds OEM standard
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1128)

Multi-Use Connector

from

$23.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54208)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$16.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Motorcraft – REGULATOR ASY (Part No.WPT-169)

REGULATOR ASY

from

$24.99
REGULATOR ASY

Dorman – Power Outlet Socket (Part No.926-332)

Power Outlet Socket

from

$39.99
This 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles
  • Ideal solution – this socket is a reliable replacement for an original socket that is damaged or has failed due to fatigue or electrical malfunction
  • Durable construction – this socket is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Factory Air – Cap and Valve A/C System Seal Kit (Part No.26780)

Cap and Valve A/C System Seal Kit

from

$29.99
Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific
See More

Felpro – Multi-Purpose O-Ring (Part No.35489)

Multi-Purpose O-Ring

from

$10.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Engine Cooling Fan Module

from

$99.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

KAI – Cooling Fan Assembly (Part No.FO3115152)

Cooling Fan Assembly

from

$143.99
New Platinum Pro Cooling Fan Assembly

Product Features:
  • 3.7/4.0/4.6/5.0/5.4 Liter Engines
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Multi-Purpose Relay (Part No.RAA1235)

Multi-Purpose Relay

from

$17.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – A/C Ssystem Seal (Part No.T26820)

A/C Ssystem Seal

from

$24.99
Carquest A/C O-Rings and Gaskets are designed for optimal performance to protect your air conditioning parts and systems from unwanted leaks. They are designed to seal each connection with premium quality material and exact measurements.
See More

Carquest Premium – A/C Red Orifice Tube (10 pkg) (Part No.T635)

A/C Red Orifice Tube (10 pkg)

from

$26.99
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • Application specific design
  • Color coded
See More

Felpro – Engine Water Pump Gasket (Part No.35478)

Engine Water Pump Gasket

from

$7.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Upgrade your 2005 Ford GT with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2005 Ford GT, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Cooling and Climate Controls are key to keeping your GT functioning at its best. At Advance Auto Parts, we offer a wide selection of 51 Cooling and Climate Controls for the 2005 Ford GT, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2005 Ford GT at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $3.29 to $143.99, with an average price of $36.08. Our 51 Cooling and Climate Controls in stock come from 11 trusted brands, so you’re sure to find the right part for your 2005 Ford GT without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Ford GT, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like FELPRO, Carquest Premium, Factory Air, and more. FELPRO Cooling and Climate Controls start at just $7.99 and boast an impressive 4.6 stars average rating from customers. Carquest Premium and Factory Air also bring quality to the table, with Cooling and Climate Controls available starting at $3.29, and at an average 4.4 stars rating. With 408 customer reviews and counting, our 2005 Ford GT Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Ford GT is always ready to roll. We’re committed to providing you with everything you need to keep your GT in top shape, all in one place. Start shopping confidently below for your 2005 Ford GT!

Best-Selling Engine Cooling Parts for 2005 Ford GTs

Enhance the driving experience in your Ford with 27 quality Engine Cooling Part components, starting at $7.99.

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Adjustable Thermostatic Fan Control

from

$23.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Economy adjustable thermostatic fan control
  • Economy Model; 32-248 Deg. F
  • For use with Imperial electric fans
  • Probe installs into radiator fins
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Brass construction for accurate temperature sensing
  • Zinc coated terminal to resist corrosion
  • Vehicle specific applications
See More

Felpro – Engine Water Pump Bypass Pipe O-Ring Kit (Part No.ES 73048)

Engine Water Pump Bypass Pipe O-Ring Kit

from

$7.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Unsurpassed quality you can trust
See More

Felpro – Multi-Purpose O-Ring (Part No.35489)

Multi-Purpose O-Ring

from

$10.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54208)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$16.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Carquest Premium – Standard Reservoir Cap: 16 PSI (Part No.10238)

Standard Reservoir Cap: 16 PSI

from

$10.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Felpro – Engine Water Pump Gasket (Part No.35478)

Engine Water Pump Gasket

from

$7.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$65.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Imperial – Electric Fan, 14" Diameter (Part No.226114)

Electric Fan, 14" Diameter

from

$99.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Thermostatic Fan Control - Preset

from

$46.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Preset thermostatic fan control
  • 185 Deg. F preset
  • For use with Imperial electric fans
  • Probe installs into radiator fins
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Brass construction for accurate temperature sensing
  • Zinc coated terminal to resist corrosion
  • Vehicle specific applications
See More

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Thermostatic Fan Control - Adjustable

from

$69.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Adjustable thermostatic fan control
  • 160 Deg. F – 210 Deg. F thread-in probe
  • For use with Imperial electric fans
  • Thread-in probe for installation in water jacket or radiator
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Brass construction for accurate temperature sensing
  • Zinc coated terminal to resist corrosion
  • Vehicle specific applications
See More

Motorcraft – Original Equipment (O.E.) Sender Assembly (Part No.DY-1144)

Original Equipment (O.E.) Sender Assembly

from

$41.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:
  • Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
  • Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
  • As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
See More

Carquest Premium – Multi-Purpose Relay (Part No.FCA1001)

Multi-Purpose Relay

from

$19.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – Engine Coolant Temperature Sensor (Part No.ACA1523)

Engine Coolant Temperature Sensor

from

$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Delphi – Engine Coolant Temperature Sensor (Part No.TS10294)

Engine Coolant Temperature Sensor

from

$21.49
Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:
  • Delphi temperature sensors deliver accurate readings and optimal performance
  • Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
  • Each sensor is electrically insulated to eliminate interference from other components in the vehicle
  • Delphi temperature sensors are impervious to electrical noise and interference
See More

Carquest Premium – Heavy Duty Thermostat: With Seal, 180 Degrees (Part No.15228)

Heavy Duty Thermostat: With Seal, 180 Degrees

from

$50.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Heavy Duty Thermostat: With Seal, 160 Degrees (Part No.14536)

Heavy Duty Thermostat: With Seal, 160 Degrees

from

$36.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

KAI – Grille Mounting Panel (Part No.FO1223107)

Grille Mounting Panel

from

$27.99
New Standard Replacement Upper Grille Mounting Panel, Attaches To Radiator Support

Product Features:
  • Attaches To Radiator Support
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12029)

Radiator Cap Tester Adapter

from

$41.99
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – Heavy Duty Thermostat: With Seal, 170 Degrees (Part No.14537)

Heavy Duty Thermostat: With Seal, 170 Degrees

from

$52.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Heavy Duty Thermostat: With Seal, 180 Degrees (Part No.14538)

Heavy Duty Thermostat: With Seal, 180 Degrees

from

$38.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

KAI – Cooling Fan Assembly (Part No.FO3115152)

Cooling Fan Assembly

from

$143.99
New Platinum Pro Cooling Fan Assembly

Product Features:
  • 3.7/4.0/4.6/5.0/5.4 Liter Engines
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Engine Cooling Fan Module

from

$99.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85279)

Coolant Housing/Water Outlet: Gasket Included

from

$64.99
We are proud to offer this Carquest product line: Carquest Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Direct-fit replacement for ease of installation
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Meets and/or exceeds OEM standard
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Edelbrock – Waterneck for Small Block Ford (Part No.48143)

Waterneck for Small Block Ford

from

$25.49
Edelbrock part No. 48143 Waterneck is designed for use with small-block Ford V8 engine applications. This Black water neck is a great way to finish off your engine. It features a 15 deg. neck and O-ring design for an improved seal, which also allows for removal without requiring a new gasket. Fits any 1-1/2″ diameter outlet hose.
See More

Most Popular 2005 Ford GT Air Conditioning Parts

Customize your Ford with 24 Air Conditioning Parts products like Expansion Valve and Orifice Tubes, Air Conditioning Relays, and AC Line O-Rings, all priced under $60.99.

Dorman – Radiator Fan Relay Kit (Part No.902-219)

Radiator Fan Relay Kit

from

$50.99
This engine cooling fan resistor kit is designed to match the original hardware required to repair the cooling fan on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine cooling fan resistor kit is designed to match the original hardware required to repair the cooling fan on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that are damaged of have failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26820)

O-Ring & Gasket A/C System Seal Kit

from

$24.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R134a and R12 refrigerants
  • Application specific
  • SUV and rear air applications
  • All the seals needed to complete the job
  • Compatible with both R134a and R12 refrigerants
  • Application specific
  • SUV and rear air applications
See More

Factory Air – System Mounted Binary Pressure Switch (Part No.20052)

System Mounted Binary Pressure Switch

from

$60.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Carquest Premium – A/C Red Orifice Tube (Part No.T38635)

A/C Red Orifice Tube

from

$3.29
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • Color coded
See More

Carquest Premium – A/C Severe Temp Automatic Adjusting Orifice Tube (Part No.T38904)

A/C Severe Temp Automatic Adjusting Orifice Tube

from

$19.99
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • Color coded
See More

Carquest Premium – A/C Standard Temp Automatic Adjusting Orifice Tube (Part No.T38902)

A/C Standard Temp Automatic Adjusting Orifice Tube

from

$19.79
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Factory Air – Cap and Valve A/C System Seal Kit (Part No.26780)

Cap and Valve A/C System Seal Kit

from

$29.99
Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific
See More

Carquest – Engine Camshaft Position Sensor Connector (Part No.PT5754)

Engine Camshaft Position Sensor Connector

from

$26.49
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
  • Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
  • A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
  • Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Driveworks – Electrical Relay (Part No.83265)

Electrical Relay

from

$15.79
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest Premium – Multi-Purpose Relay (Part No.RAA1234)

Multi-Purpose Relay

from

$16.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – Multi-Purpose Relay (Part No.RAA1235)

Multi-Purpose Relay

from

$17.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1011)

Multi-Use Connector

from

$26.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1128)

Multi-Use Connector

from

$23.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Purpose Relay (Part No.RAA1257)

Multi-Purpose Relay

from

$31.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1465)

Multi-Use Connector

from

$49.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Power Outlet Socket (Part No.926-332)

Power Outlet Socket

from

$39.99
This 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles
  • Ideal solution – this socket is a reliable replacement for an original socket that is damaged or has failed due to fatigue or electrical malfunction
  • Durable construction – this socket is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Factory Air – System Mounted Cycling Pressure Switch (Part No.20957)

System Mounted Cycling Pressure Switch

from

$28.49
High quality OE replacement part with all components needed to complete the job.

Product Features:
  • Contains gaskets, o-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
  • Contains gaskets, o-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ABA1035)

A/C Compressor Cut-Out Switch

from

$46.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The HVAC Pressure Sensor/Switch monitors the refrigerant pressure within the air conditioning system, ensuring optimal performance and preventing potential system damage, which enhances climate control and passenger comfort. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1541)

Multi-Use Connector

from

$43.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Engine Cooling Fan Resistor (Part No.WTC2223)

Engine Cooling Fan Resistor

from

$50.99
The Engine Cooling Fan Resistor is part of the radiator and A/C condenser fan system operation. The engine computer will use the resistor to control the operating speed of the fan motor to achieve a lower fan speed during certain vehicle operating conditions.

Product Features:
  • Application matched components ensure the cooling fan system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Motorcraft – A/C Clutch Cycle Switch (Part No.YH-1706)

A/C Clutch Cycle Switch

from

$33.99
A/C Clutch Cycle Switch

Carquest Premium – A/C Red Orifice Tube (10 pkg) (Part No.T635)

A/C Red Orifice Tube (10 pkg)

from

$26.99
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • Application specific design
  • Color coded
See More

Carquest Premium – A/C Ssystem Seal (Part No.T26820)

A/C Ssystem Seal

from

$24.99
Carquest A/C O-Rings and Gaskets are designed for optimal performance to protect your air conditioning parts and systems from unwanted leaks. They are designed to seal each connection with premium quality material and exact measurements.
See More

Motorcraft – REGULATOR ASY (Part No.WPT-169)

REGULATOR ASY

from

$24.99
REGULATOR ASY

Top-Rated Cooling and Climate Controls Brands For Your 2005 Ford GT

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2005 Ford GTs. Below you’ll find some of our best rated Cooling and Climate Controls from FELPRO, Carquest Premium, and Factory Air, and more. Cooling and Climate Controls from these brands that fit a 2005 GT start at just $3.29 and are rated as high as 4.6 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2005 Ford GT Cooling and Climate Controls

When it comes to maintaining or upgrading your 2005 Ford GT, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Cooling and Climate Controls, specifically designed for the 2005 Ford GT. With over 3 FELPRO brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.99, with an average price of just $8.99. Plus, with over 122 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Engine Water Pump Bypass Pipe O-Ring Kit
from $7.99
(1)
Engine Water Pump Bypass Pipe O-Ring Kit
“It was just what I needed”
Engine Water Pump Gasket
from $7.99
(11)
Engine Water Pump Gasket
“Perfect fit !”
Multi-Purpose O-Ring
from $10.99
(110)
Multi-Purpose O-Ring
“It work and price was reasonable”

Popular Carquest Premium 2005 Ford GT Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2005 Ford GT owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2005 GT, Advance Auto Parts carries a full inventory of 3 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $3.29 to $19.99, plus, with more than 142 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.
Standard Reservoir Cap: 16 PSI
from $10.99
(26)
Standard Reservoir Cap: 16 PSI
“Excelente”
A/C Severe Temp Automatic Adjusting Orifice Tube
from $19.99
(97)
A/C Severe Temp Automatic Adjusting Orifice Tube
“Good item”
A/C Red Orifice Tube
from $3.29
(19)
A/C Red Orifice Tube
“It was super awesome and great”

FAQs for 2005 Ford GT Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2005 Ford GTs?

Out of 51 Cooling and Climate Controls that fit 2005 Ford GTs, the following parts are the top sellers:

What’s the price range for 2005 Ford GT Cooling and Climate Controls?

Cooling and Climate Control prices for the 2005 Ford GT start at $3.29 and go up to $143.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2005 Ford GT?

The average price for Cooling and Climate Controls for the 2005 Ford GT is $36.08. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Ford GT model years?

Yes, we currently carry Cooling and Climate Controls for 6 model years of Ford GTs between 2006 and 2022. Cooling and Climate Controls are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, and 2006.

What are the cheapest Cooling and Climate Controls for my 2005 Ford GT?

The cheapest 2005 Ford GT Cooling and Climate Controls we carry in stock are:

What are the top-rated Cooling and Climate Controls that fit the 2005 Ford GT?

Out of 408 reviews by customers, our 2005 Ford GT Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2005 Ford GT and their top-rated products:

What types of Cooling and Climate Controls do you sell for my 2005 Ford GT?

Can I get help with 2005 Ford GT Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Cooling and Climate Controls and more.

What is your return policy for Ford GT Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Ford GT Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.