2005 Ford F-250 Super Duty Differentials

Essential 2005 Ford F-250 Super Duty Differentials

aFe POWER – Differential Cover (Part No.46-70022)

Differential Cover

from

$397.99
aFe Power’s new rear differential cover brings performance engineering to the protection of your axles differential. This differential cover is constructed out of durable die cast aluminum with reinforced ribs and wrinkle black powder coating for maximum strength and styling. This cover comes with all necessary hardware and includes an O-ring for a leak free seal. This cover has about a 5 quart lube capacity at the factory line; factory cover holds about 4 quarts. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a large magnetic drain and fill plug that captures loose particles for maximum rear-end protection. Pre-installed large oil level sight glass with calibration plug set to the factory fluid level to eliminate overfilling.

Product Features:
  • External Fins Transfer Heat To Atmosphere
  • Internal Fins Absorb Heat From Lubricating Fluid
  • Magnetic Fill Plug
  • Magnetic Drain Plug
See More

Powertrax – Grip PRO Traction System (Part No.GT436035)

Grip PRO Traction System

from

$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Clutch Set (Steel & Fiber) (Part No.16155)

Dana 60 & Dana 70 Power Lok Clutch Set (Steel & Fiber)

from

$181.99
Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60, 70, 70U and 70HD Powr Lok positraction
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 60 Reverse Rotation In A 3.73 Ratio (Part No.36305)

Replacement Ring & Pinion Gear Set For Dana 60 Reverse Rotation In A 3.73 Ratio

from

$539.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits reverse rotation Dana Spicer 60
  • 9.75″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 3.73 ratio
See More

Yukon Gear – Zip Locker Bulkhead Fitting Kit (Part No.34000)

Zip Locker Bulkhead Fitting Kit

from

$36.99
Product Features:
  • Bulkhead fitting kit
  • Includes bulkhead fitting, outer fitting and o-ring
See More

National – Bearings (Part No.02820)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

USA Standard Gear – Master Overhaul Kit for ’07 & Down Ford 10.5 Differential (Part No.37085)

Master Overhaul Kit for '07 & Down Ford 10.5 Differential

from

$494.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 1999-2006 Ford 10.5″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Royal Purple – MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01301)

MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT

from

$25.99
Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:
  • Maximizes horsepower
  • Extends gear and bearing life
  • Reduces operating temperature
  • Lower coefficient of friction
  • Superior corrosion protection
  • Separates rapidly from water
  • For use with open, limited-slip and locking differential
  • Contains limited-slip friction modifier
  • Made in USA
See More

National – Shaft Repair Sleeve (Part No.99225)

Shaft Repair Sleeve

from

$28.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Pinion Install Kit For Ford 10.25" Differential (Part No.13038)

Pinion Install Kit For Ford 10.25" Differential

from

$349.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 10.25″
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – Grizzly Locker For Dana 60, 4.56 & Up, 35 Spline (Part No.28005)

Grizzly Locker For Dana 60, 4.56 & Up, 35 Spline

from

$1050.00
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 35 spline axles
  • 4.56 and up ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

USA Standard Gear – Replacement Spider Gear Set For Dana 50, 30 Spline (Part No.39007)

Replacement Spider Gear Set For Dana 50, 30 Spline

from

$198.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 30 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Replacement Pinion Depth Shims For Dana 60, 61 & D70-U

from

$17.99
Product Features:
  • Pinion depth shims for Dana Spicer 60 and 70U
See More

Spicer – Pinion Seal (Part No.J7010399447SPI)

Pinion Seal

from

$32.12
Pinion Seal

FAG US – CUP (Part No.LM104911)

CUP

from

$13.29
CUP

Yukon Gear – 10.25" & 10.5" Ford Carrier Installation Kit (Part No.57006)

10.25" & 10.5" Ford Carrier Installation Kit

from

$289.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 10.25″ & 10.5″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Ford 10.25″ and 10.5″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Yukon Gear – Standard Open & Tracloc Cross Pin Shaft For 10.25" Ford (Part No.33329)

Standard Open & Tracloc Cross Pin Shaft For 10.25" Ford

from

$56.99
Standard Open & TracLoc cross pin shaft for 10.25″ Ford.

Product Features:
  • Cross pin shaft
  • Fits Ford 10.25″
See More

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Replacement Baffle For Dana 60 & Dana 70-U

from

$6.99
Product Features:
  • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
See More

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread

from

$7.99
Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
  • 7/8″ x 14 thread
  • 1 5/16″ socket
See More

Yukon Gear – Long Yoke For ’93 And Newer Ford 10.25" And 10.5" With A 1410 U/Joint Size (Part No.41042)

Long Yoke For '93 And Newer Ford 10.25" And 10.5" With A 1410 U/Joint Size

from

$339.99
Yukon long yoke for ’93 and newer Ford 10.25″ and 10.5″ with a 1410 U/joint size. 4.188″ snap ring span, 1.118″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 1993 and up Ford 10.25″ and 10.5″
  • 31 spline
  • 1410 u-joint size
  • 4.188″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)

Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60

from

$232.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Motive Gear – Differential Gear Install Kit (Part No.F10.5IK)

Differential Gear Install Kit

from

$67.99
Product Features:
  • MINI INSTALL KIT – FORD 10.5″
See More

Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)

Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18

from

$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.

Product Features:
  • Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
  • 1/2″ x 18 thread
See More

Motive Gear – Ring Gear Bolt (Part No.E5TZ4216A)

Ring Gear Bolt

from

$2.99


Product Features:
  • Ford 10.25″RING GEAR BOLT 1.33″ O.A. 1″ THREADS
See More

2005 Ford F-250 Super Duty Differentials

Maybe you’re in the middle of a full rebuild of that 2005 Ford F-250 Super Duty. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 262 different Differentials in our inventory ranging from $2.99 to $2,984.99. That means you can find the exact parts or products you need to keep that 2005 Ford F-250 Super Duty running smoothly.

Differentials are only as good as their brand. We stock 20 different brands to make sure you have plenty of trusted parts to choose from for your 2005 Ford F-250 Super Duty. Valvoline, Royal Purple, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2005 Ford F-250 Super Duty, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 9,482 reviews in this category, some of the top rated parts include MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT with 4.9 stars and Bearings with 4.5 stars.

So if you’re in the market for aftermarket Differentials to keep your 2005 Ford F-250 Super Duty rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2005 Ford F-250 Super Duty Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2005 Ford F-250 Super Duty demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your F-250 Super Duty the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Rear Differential Cover Gaskets categories, plus more. For a 2005 Ford F-250 Super Duty, our most popular Felpro Differentials include:
Differential Cover Gasket
from $9.49
(26)
Differential Cover Gasket
Rear Differential Cover Gaskets

Top 2005 Ford F-250 Super Duty Differentials from Valvoline

Valvoline products are another trusted brand when it comes to Differentials for your 2005 Ford F-250 Super Duty. Popular Valvoline parts include:
Transfer Case Fluid, 1 Quart
from $14.99
(36)
Transfer Case Fluid, 1 Quart
Differential Oil

FAQs for 2005 Ford F-250 Super Duty Differentials

What are the most purchased Differentials for the 2005 Ford F-250 Super Duty?

Out of 262 Differentials for the 2005 Ford F-250 Super Duty, the most popular in our inventory are:
DEX/MERC Automatic Transmission Fluid, 1 Gallon
from $35.99
(17)
DEX/MERC Automatic Transmission Fluid, 1 Gallon
Differential Oil
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
from $19.99
This product is not rated
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
Differential Oil

What are the top-rated 2005 Ford F-250 Super Duty Differentials?

Top-rated Differentials for your 2005 Ford F-250 Super Duty based on customer reviews/ratings are:
Bearings
from $9.99
(8)
Bearings
“Fit like a glove. Sealed up the diff like mighty putty on steroids”
Multi Purpose Seal
from $30.99
(4)
Multi Purpose Seal
“quality”