2004 Jeep Wrangler Vehicle Hoods
More 2004 Jeep Wrangler Vehicle Hoods
Find your specific 2004 Jeep Wrangler original or aftermarket Vehicle Hoods below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2004 Jeep Wrangler Vehicle Hoods
Rugged Ridge – Hood Scoop (Part No.13307.01)
from
$61.99
This black UV treated plastic ram air induction scoop forces more air into your Jeep ventilation system to increase interior ventilation up to 60 percent. Installs over factory hood vent without drilling. For maximum air flow, the scoop should be mounted
Product Features:
See More
Product Features:
- Black
- UV Treated
- Easy to Install
- Uses Automotive Grade Double Sided Tape
- Limited 5 Year Warranty
Rugged Ridge – Hood Scoop (Part No.11352.12)
from
$61.99
Increase the efficiency of your heater and air conditioner with these easy to install Hood Scoops. Available in UV treated chrome plastic, black UV treated plastic or durable smoked acrylic for long life and matching good looks. Ram Induction hood scoop i
Product Features:
See More
Product Features:
- Black
- UV Treated
- Easy to Install
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – Black, Plastic, Set Of 2 (Part No.488601)
from
$15.29
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
KAI – Hood Panel (Part No.CH1230205PP)
from
$639.99
New CAPA Certified Premium Replacement Hood Panel, With One Washer Hole (Replaces Two Hole Version)
Product Features:
See More
Product Features:
- With One Washer Hole (Replaces Two Hole Version), Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Crown Auto Jeep Replacmnt – Hood To Fender Grommet, Black, Rubber (Part No.J4007541)
from
$3.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Rubber Construction
- Meets Quality Standards
- Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
- Easy To Install
StrongArm – Back Glass Lift Support: 22.99" Ext Length, 9.14" Travel, 28 Lbs of Force, 1 Pk (Part No.C6602)
from
$26.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Back Glass Lift Support: 25.47" Ext Length, 10.79" Travel, 52 Lbs of Force, 1 Pk (Part No.C4761)
from
$29.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
KAI – Hood Hinge (Part No.CH1236125)
from
$74.99
New Standard Replacement Driver Or Passenger Side Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Rugged Ridge – Hood Hinge (Part No.11205.01)
from
$86.99
This pair of hood hinges from Rugged Ridge comes in a semi-gloss black powder-coated finish to protect your investment against the elements. Hardware included ensuring a trouble free installation.
Product Features:
See More
Product Features:
- Black
- OE Style
- Direct Fit
- Includes Hardware
- Limited 5 Year Warranty
Rugged Ridge – Hood Hinge (Part No.11205.02)
from
$70.99
This pair of hood hinges from Rugged Ridge comes in a semi-gloss black powder-coated finish to protect your investment against the elements. Hardware included ensuring a trouble free installation.
Product Features:
See More
Product Features:
- Black
- OE Style
- Direct Fit
- Includes Hardware
- Limited 5 Year Warranty
Metro Mould – Cowl Seal (Part No.CS 99)
from
$81.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Cowl Seal. 55-1/4 In. Long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Cowl Seal (Part No.CS 99-A)
from
$126.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Cowl Seal. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Omix – Cowl Rubber Seal (Part No.12302.11)
from
$34.99
Is the hood to cowl seal deteriorating on your 97-06 Jeep Wrangler? You can tell by checking to see if the seal is brittle and weathered; or maybe your hood could be rattling. If so, it is time to replace it with the Omix-ADA OE replacement hood to cowl s
Product Features:
See More
Product Features:
- Direct OE Replacement
- Built To Original Specifications
- 5 Year Limited Warranty
Rugged Ridge – Hood Kit (Part No.11101.03)
from
$139.99
This complete eight piece hood kit from Rugged Ridge includes all necessary mounting hardware. Constructed of prime 304 stainless steel that has been polished to a mirror finish, these accessories are built to last. 304 stainless steel is virtually rust p
Product Features:
See More
Product Features:
- Stainless Steel
- 8 Piece Kit
- Includes Hardware
- Limited 5 Year Warranty
Rugged Ridge – Hood Kit (Part No.11101.01)
from
$169.99
This stainless steel 9-piece hood kit is constructed of prime 304 stainless steel that has been polished to a mirror finish. 304 stainless steel is virtually rust proof guaranteeing that these parts will stand the test of time. All hardware is also constr
Product Features:
See More
Product Features:
- Stainless Steel
- 9 Piece Kit
- Includes Hardware
- Limited 5 Year Warranty
Rugged Ridge – Hood Kit (Part No.11116.06)
from
$163.99
Get the ultimate WOW factor with Rugged Ridge polished stainless steel accessories. These beautiful bolt on accessories turn even the most worn Jeep into a hot street machine. Constructed of prime 304 stainless steel that has been polished to a mirror fin
Product Features:
See More
Product Features:
- Stainless Steel
- Weather Resistant
- Pair
- Installs Directly Covering Factory Hinge Using Existing Hardware
- Limited 5 Year Warranty
Rugged Ridge – Hood Lock Kit (Part No.11252.02)
from
$49.49
Rugged Ridge hood locks feature a special design that virtually disappears into the grille, so they won’t affect the appearance of your Jeep’s front-end. These clever applications install in minutes. An upgraded internal lock cover keeps ice and debris fr
Product Features:
See More
Product Features:
- Hidden Behind Grille
- Keeps Your Jeeps Hood Locked
- Internal Lock Cover
- Easy to Install
- Limited 5 Year Warranty
Rugged Ridge – Hood Lock Kit (Part No.11252.03)
from
$49.49
This hood lock kit includes two keys and features a special design that virtually disappears into the grille without taking away from the appearance of your Jeep’s front-end. These clever applications install in minutes. An upgraded internal lock cover ke
Product Features:
See More
Product Features:
- Hidden Behind Grille
- Keeps Your Jeeps Hood Locked
- Internal Lock Cover
- Easy to Install
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – Painted, Black, Steel, Single (Part No.55176731AF)
from
$24.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Omix – Bumper; Hood to Fend (Part No.12031.20)
from
$7.79
Bumper; Hood to Fend
Omix – Hood To Grille Bumper Stop (Part No.12031.01)
from
$6.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Single
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Dorman – Help – Hood Bumper Rest (Part No.45363)
from
$17.99
This hood stop support is designed to match the fit and function of the original support on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this hood stop support is designed to match the fit and function of the original support on specified vehicles
- Restores functionality – reliable replacement for an original support that has failed due to collision damage or has cracked from fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Omix – Screw; Hood Bumper S (Part No.12029.35)
from
$7.29
Screw; Hood Bumper S
KAI – Hood Panel (Part No.CH1230304)
from
$494.99
New Standard Replacement Hood Panel, With 2 Washer Nozzles, Without Power Bulge
Product Features:
See More
Product Features:
- With 2 Washer Nozzles, Without Power Bulge, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Panel (Part No.CH1230205V)
from
$564.99
New Economy Replacement Hood Panel, With One Washer Hole (Replaces Two Hole Version)
Product Features:
See More
Product Features:
- With One Washer Hole (Replaces Two Hole Version), Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Popular 2004 Jeep Wrangler Vehicle Hoods Categories
2004 Jeep Wrangler Vehicle Hoods
Maybe you’re in the middle of a full rebuild of that 2004 Jeep Wrangler. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 20 different Vehicle Hoods in our inventory ranging from $3.99 to $639.99. That means you can find the exact parts or products you need to keep that 2004 Jeep Wrangler running smoothly.
Vehicle Hoods are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Jeep Wrangler. StrongArm, Atlas Lift, and Omix are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Vehicle Hoods for your 2004 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 66 reviews in this category, some of the top rated parts include Hood Scoop with 4.0 stars.
So if you’re in the market for aftermarket Vehicle Hoods to keep your 2004 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Vehicle Hoods Brands To Make Your 2004 Jeep Wrangler Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.
Popular StrongArm Vehicle Hoods
We carry StrongArm parts in our stock across Lift Supports categories, plus more. For a 2004 Jeep Wrangler, our most popular StrongArm Vehicle Hoods include:
from
$19.99
(10)
Back Glass Lift Support: 25.39" Ext Length, 10.82" Travel, 33 Lbs of Force, 1 Pk
Lift Supports
FAQs for 2004 Jeep Wrangler Vehicle Hoods
What are the most purchased Vehicle Hoods for the 2004 Jeep Wrangler?
Out of 20 Vehicle Hoods for the 2004 Jeep Wrangler, the most popular in our inventory are:
What are the top-rated 2004 Jeep Wrangler Vehicle Hoods?
Top-rated Vehicle Hoods for your 2004 Jeep Wrangler based on customer reviews/ratings are:
from
$61.99
(1)
Hood Scoop
“THIS PRODUCT HELP INCREASE AIR FLOW IN ENGINE COMPARTMENT,BIG HELP WITH HOT FOUR WHEELING DAYS”
