2004 Jeep Wrangler Vehicle Hoods

New CAPA Certified Premium Replacement Hood Panel, With One Washer Hole (Replaces Two Hole Version)

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

New Economy Replacement Hood Panel, With One Washer Hole (Replaces Two Hole Version)

New Economy Replacement Hood Panel, One Washer Hole, High Strength Steel

New Standard Replacement Hood Panel, With 2 Washer Nozzles, Without Power Bulge

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Lift supports are pressurized cylinders that are used to support hoods, hatches & rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

“Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “”bouncing”” or “”Jumping”” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!”

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Flowmaster introduces our new Outlaw Extreme stainless steel cat-back exhaust system for the 2007-2018 Jeep Wrangler JK with the 3.6L/3.8L engines. This system uses an Outlaw series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing is used for maximum exhaust flow and durability. The system has a turndown style dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

Flowmaster introduces our new Flow FX Extreme stainless steel cat-back exhaust system for the 2018-2026 Jeep Wrangler JL with the 3.6L engine. This system uses a Flow FX series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing is used for maximum exhaust flow and durability. Gain up to 12 hp and 13 lbs-ft of torque at the rear wheels. The system has a turndown style dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

This Flowmaster Outlaw Cat-back exhaust system replaces the factory transverse muffler on 2018-2026 Jeep Wrangler Unlimited 4-door models with the 3.6L engine, including the Sahara 3.6L with Hybrid E-torque option. The system relocates the muffler into a position right behind the catalytic converter where it is tucked up into the frame and out of harm’s way when navigating rocky terrain. The system is constructed from 409S stainless steel, features a race-proven Outlaw series muffler for an aggressive exterior with a moderate interior sound level in the cab and the single 2.50-inch mandrel-bent stainless steel tailpipe is re-routed to run up and over the rear sway bar and exits up high at the rear bumper to provide maximum clearance for extreme crawling. The system is finished off with a polished 3.00-inch stainless steel tip. Note: Does Not fit 2-door models.

“This Flow FX cat-back exhaust system is designed for 2000-2006 Jeep Wrangler TJ with 4.0L engine and features all stainless steel construction for added durability and longevity. The 2.50-inch Flow FX “”straight-through”” performance muffler mounts high in the frame rail just behind the factory catalytic converter and bolts up to the factory flange. The Flow FX system has a moderate deep powerful sound outside with minimal interior resonance. The 2.50-inch mandrel-bent stainless steel tailpipe is tucked up high in the undercarriage protecting it from being crushed when traversing rocky terrain. The system is finished off with a large 3.50-inch black ceramic coated stainless steel tip embossed with the Flowmaster logo. Uses the factory hanger locations, comes with installation instructions and all hardware necessary for a quick and easy installation you can do at home.”

The Flowmaster Force II Axle-back exhaust system for 2012-2018 Jeep Wrangler JK/JKU with the 3.6L engine is perfect for the person looking for a moderate exterior and mild interior exhaust tone, with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system features a stainless steel 80 Series crossflow muffler and dual 2.50-inch mandrel-bent tailpipes. The system finishes with a pair of 3.50-inch polished stainless steel tips and uses the factory hanger locations for an easy installation you can do at home. The system is covered by our Limited Warranty and includes all necessary parts, hardware, and installation instructions.

Our new Outlaw Axle-back exhaust system for the 2018-2026 Jeep Wrangler JL with the 2.0L/3.6L is perfect for the person looking for an aggressive exterior sound with a moderate interior tone with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system fits both 2/4 door models, features full stainless steel construction, uses the factory hanger locations and has a specially designed Outlaw Series muffler with dual 2.50-inch mandrel-bent tailpipes. The system is finished off with a pair of large 4.00-inch polished stainless steel tips embossed with the Flowmaster logo and exit out under the rear bumper. Covered by Flowmaster’s Limited Warranty and designed for a perfect fit, the kit includes all necessary parts and hardware for easy installation you can do at home.

The new Flowmaster American Thunder cat-back exhaust system for the 2007-2018 Jeep Wrangler JK is perfect for the person looking for maximum performance and off-road ground clearance. This system replaces the factory transverse muffler and relocates the Super HP-2 muffler behind the factory catalytic converter, providing a moderate to aggressive sound level. The system features a mandrel-bent 2.50-inch stainless steel tailpipe with a 3.00-inch polished stainless steel tip tucked up high under the rear bumper for maximum clearance. Fits both 2 and 4 door models with either the 3.8L or 3.6L engines. Because the tailpipe is tucked up so high, an aftermarket metal bumper is recommended. The exhaust system is covered by our Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home.

This Flowmaster Force II Axle-back exhaust system for the 2018-2025 Jeep Wrangler JL with the 3.6L V6 and 2.0L turbo engines is perfect for the person looking for a moderate exterior and mild interior exhaust tone, with all of the performance benefits that you would expect from Flowmaster. This bolt-on Dual Out Rear emissions-legal system features a stainless steel 80 Series cross-flow muffler with dual 2.50-inch mandrel-bent tailpipes which are finished off with a pair of large 4.00-inch polished Flowmaster stainless steel tips for a modern look. The system includes all necessary parts, hardware and instructions for an easy installation. Covered by our Limited Warranty.

Factory replacement M12x1.75x150mm flange head bolt kit, Stock replacement bolts are hard to find due to their uncommon length. This kit can be used for either GM LS/LT & Mopar Gen III Hemi poly mounts

These engine mounts work together with the stock skid plate / transmission cross member to mount the transmission & stock NP231J transfer case. The Gen III Hemi 5.7L factory truck oil pan & accessory drive system are recommended for this swap (these parts come on the donor engine when using the 2003-2008 5.7L Hemi truck engine). The 5.7L truck engine is an ideal engine choice for the Wrangler since it makes torque at a low RPM, right where it is needed for off-road use.

Hooker BlackHeart Clamshell Engine Mounts and Polyurethane Engine Mount Inserts are now available for Gen III Hemi engines. These clamshell housings are a two-piece, bolt together design featuring heavy-duty 11 gauge steel construction with a durable powder coated finish.

This Flowmaster Force II Axle-back exhaust system for the 2018-2026 Jeep Wrangler JL with the 3.6L or 2.0L turbo is perfect for the person looking for a moderate exterior and mild interior exhaust tone, with all of the performance benefits that you would expect from Flowmaster. This bolt-on Dual Out Rear emissions-legal system features a stainless steel 80 Series cross-flow muffler and dual 2.50-inch mandrel bent tailpipes. The system finishes with large 4.00-inch black ceramic coated Flowmaster embossed 304 stainless steel tips for a stealthy modern look. The system is designed for an easy fit and includes all necessary parts, hardware and easy to follow instructions. Covered by our Flowmaster Limited Warranty.

Flowmaster introduces our new Flow FX Extreme stainless steel cat-back exhaust system for the 2018-2026 Jeep Wrangler JL with the 2.0L turbo engine. This system uses a Flow FX series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing is used for maximum exhaust flow and durability. The system has a turndown style dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.