2004 Ford Crown Victoria Shocks and Struts
More 2004 Ford Crown Victoria Shocks and Struts
Find your specific 2004 Ford Crown Victoria original or aftermarket Shocks and Struts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2004 Ford Crown Victoria Shocks and Struts
KYB – Gas Shock (Part No.344424)
from
$56.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Product Features:
See More
Product Features:
- KYB Recommended Orem Replacement Shock
- The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Crown Victoria Or Grand Marquis
- The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
- Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
- KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.281346)
from
$151.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
- EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
- CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
- COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
Monroe – Magnum Severe Service Shock Absorber (Part No.550010)
from
$68.99
Engineered for hardworking emergency, municipal, fleet and jobsite vehicles, Monroe® Magnum® Severe Service shocks feature enhanced components for superior stability and ride control in the toughest environments.
Product Features:
See More
Product Features:
- ENGINEERED FOR EMERGENCY AND FLEET VEHICLES — For hardworking first responder, municipal, fleet and jobsite vehicles and features 10-stage valving that adjusts to road extremes to help handle frequent stops, heavy loads and high miles
- LONGER SERVICE LIFE — Larger bore, bigger 2-in. reserve tube and 0.05-in. pressure tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
- STRONG AND DURABLE — Loop welding techniques include resistance welds and/or arc welds up to 360-degrees for durability while shouldered bushing and bonded bushing (on most applications) delivers quality
- BUILT TO LAST — Heavy-duty nitrocarburized rod (on most applications) and sintered iron piston enhance durability for longer service life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- CONTROL AND DURABILITY – Banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces for smooth operation
- .05-inch pressure tube withstanding pressure of 9KPSI – On most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
Monroe – Magnum Severe Service Strut (Part No.553001)
from
$141.99
Engineered for hardworking emergency, municipal, fleet and jobsite vehicles, Monroe® Magnum® Severe Service shocks feature enhanced components for superior stability and ride control in the toughest environments.
Product Features:
See More
Product Features:
- ENGINEERED FOR EMERGENCY AND FLEET VEHICLES — For hardworking first responder, municipal, fleet and jobsite vehicles and features 10-stage valving that adjusts to road extremes to help handle frequent stops, heavy loads and high miles
- LONGER SERVICE LIFE — Larger bore, bigger 2-in. reserve tube and 0.05-in. pressure tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
- STRONG AND DURABLE — Loop welding techniques include resistance welds and/or arc welds up to 360-degrees for durability while shouldered bushing and bonded bushing (on most applications) delivers quality
- BUILT TO LAST — Heavy-duty nitrocarburized rod (on most applications) and sintered iron piston enhance durability for longer service life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- CONTROL AND DURABILITY – Banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces for smooth operation
- .05-inch pressure tube withstanding pressure of 9KPSI – On most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55960)
from
$56.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5960)
from
$85.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Suncore – Shock (Part No.40F-12-F)
from
$31.99
At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.
Product Features:
See More
Product Features:
- Smooth Ride
- Lifetime Warranty
- Direct Replacement
KYB – High Pressure Monotube Gas Shock (Part No.KG4515)
from
$72.99
Product Features:
See More
- Adds up to 25% more damping performance over original equipment shocks
- Components and valving designed specifically for classic cars
- High gas pressure design provides instant, extra control
- Monotube design outperforms all other standard shock absorbers
- Unique, air-free, hydraulic unit eliminates performance fade
KYB – High Pressure Monotube Gas Shock for Cars and Trucks (Part No.KG5458)
from
$92.99
Product Features:
See More
- Adds up to 25% more damping performance over original equipment shocks
- Vehicle specific components and valving
- High gas pressure design provides instant, extra control
- Monotube design outperforms all other standard shock absorbers
- Unique, air-free, hydraulic unit eliminates performance fade
MOOG – Strut Mount (Part No.K160328)
from
$44.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Construction and design validated by MOOG engineers
- Replacement helps restore vehicle handling
- Superior rubber to steel bonding for durability
- Engineered to meet or exceed OE requirements
- Provides like-new steering, ease of installation and longer life
Suncore – Shock (Part No.40F-12-R)
from
$32.99
At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.
Product Features:
See More
Product Features:
- Smooth Ride
- Lifetime Warranty
- Direct Replacement
Monroe – Monro-Matic Plus Shock Absorber (Part No.33128)
from
$37.99
Engineered to get more miles from your car, Monro-Matic® PLUS shocks are equipped with nitrogen gas charge and feature Velocity Proportional Valving (VPV) technology for improved comfort at an economical price.
Product Features:
See More
Product Features:
- CONSISTENT RIDE — Velocity Proportional Valving (VPV) technology and all-weather fluid containing special additives to reduce friction and ensure smooth rod reaction and an overall smoother ride
- RELIABLE PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration
- RESTORES RIDE AND HANDLING — Larger bore provides more efficient damping control to provide consistency and a smooth ride (where applicable)
- BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while banded piston and bronze reinforced guide provide durability
- GET MORE MILES FROM YOUR RIDE — Designed and validated to meet OE spec and deliver consistent performance
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.L4000569756MNR)
from
$47.31
TWIN TECHNOLOGY TUNED FOR EXCEPTIONAL CONTROL The Monroe OESpectrum shock absorbers feature our latest, global, original equipment valving technologies for domestic and foreign nameplate applications. Monroe OESpectrum units provide an unprecedented level of handling precision and control while filtering out ride harshness. This unique blend of control and comfort is made possible through Tenneco’s Twin Technology Active Control System, an exclusive internal damping control technology. Tenneco’s Twin Technology consists of the latest Impact Control Valve (ICV), delivers exceptional control by regulating the flow of fluid which helps control vehicle roll and isolate road impact, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration, and harshness experienced with rough, bumpy road conditions.
Product Features:
See More
Product Features:
- All Weather Fluid – Contains special modifiers to reduce friction and ensure smooth rod reaction.
- Full Displaced Valving – Better valving range on both the compression and extension cycles.
- Fluon Banded Piston – The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
- 1-3/16 inch Bore – Lower operating pressure than standard 1 inch bore units
- Twin Tube Technology – Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
- Nitrogen Gas Charged – For improved ride and handling, helps maintain tire to road contact by reducing aeration.
- 1/2 inch Diameter Piston Rod – Nitrocarburized rod for long service life. (On non-dust shield units only)
- Special Seal – Self-lubricating fluid seal designed to retain gas without excessive wear or friction.
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5967)
from
$48.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55961)
from
$44.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5993)
from
$92.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
KYB – Gas Shock (Part No.343135)
from
$47.49
Product Features:
See More
- Recommended OEM replacement shock for classic, domestic cars
- Specifically calibrated to help restore original handling and control characteristics
- Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
- Triple chrome plated piston rod and multi-lip oil seals that reduce wear
- Solid seamless mounting eye rings and bolt bushings to eliminate rattles
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5961)
from
$83.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55993)
from
$59.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – Magnum Severe Service Shock Absorber (Part No.550011)
from
$79.99
Engineered for hardworking emergency, municipal, fleet and jobsite vehicles, Monroe® Magnum® Severe Service shocks feature enhanced components for superior stability and ride control in the toughest environments.
Product Features:
See More
Product Features:
- ENGINEERED FOR EMERGENCY AND FLEET VEHICLES — For hardworking first responder, municipal, fleet and jobsite vehicles and features 10-stage valving that adjusts to road extremes to help handle frequent stops, heavy loads and high miles
- LONGER SERVICE LIFE — Larger bore, bigger 2-in. reserve tube and 0.05-in. pressure tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
- STRONG AND DURABLE — Loop welding techniques include resistance welds and/or arc welds up to 360-degrees for durability while shouldered bushing and bonded bushing (on most applications) delivers quality
- BUILT TO LAST — Heavy-duty nitrocarburized rod (on most applications) and sintered iron piston enhance durability for longer service life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- CONTROL AND DURABILITY – Banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces for smooth operation
- .05-inch pressure tube withstanding pressure of 9KPSI – On most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
Monroe – Magnum Severe Service Shock Absorber (Part No.550018)
from
$91.99
Engineered for hardworking emergency, municipal, fleet and jobsite vehicles, Monroe® Magnum® Severe Service shocks feature enhanced components for superior stability and ride control in the toughest environments.
Product Features:
See More
Product Features:
- ENGINEERED FOR EMERGENCY AND FLEET VEHICLES — For hardworking first responder, municipal, fleet and jobsite vehicles and features 10-stage valving that adjusts to road extremes to help handle frequent stops, heavy loads and high miles
- LONGER SERVICE LIFE — Larger bore, bigger 2-in. reserve tube and 0.05-in. pressure tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
- STRONG AND DURABLE — Loop welding techniques include resistance welds and/or arc welds up to 360-degrees for durability while shouldered bushing and bonded bushing (on most applications) delivers quality
- BUILT TO LAST — Heavy-duty nitrocarburized rod (on most applications) and sintered iron piston enhance durability for longer service life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- CONTROL AND DURABILITY – Banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces for smooth operation
- .05-inch pressure tube withstanding pressure of 9KPSI – On most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
Popular 2004 Ford Crown Victoria Shocks and Struts Categories
2004 Ford Crown Victoria Shocks and Struts
Maybe you’re in the middle of a full rebuild of that 2004 Ford Crown Victoria. Maybe you just need a couple of Shocks and Struts. Either way, Advance Auto Parts has 10 different Shocks and Struts in our inventory ranging from $31.99 to $194.99. That means you can find the exact parts or products you need to keep that 2004 Ford Crown Victoria running smoothly.
Shocks and Struts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Ford Crown Victoria. Monroe, Carquest Premium, and Suncore are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Shocks and Struts for your 2004 Ford Crown Victoria, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Shocks and Struts to keep your 2004 Ford Crown Victoria rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Shocks and Struts Brands To Make Your 2004 Ford Crown Victoria Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Ford Crown Victoria demands trusted brand parts and products to keep it running. Many trusted brands of Shocks and Struts make up Advance Auto Parts’ inventory, and all are ready to help make your Crown Victoria the best it can be. Be sure to browse some of our top Shocks and Struts brands and parts.
Popular Monroe Shocks and Struts
We carry Monroe parts in our stock across Front Shock and Struts and Rear Shock and Struts categories, plus more. For a 2004 Ford Crown Victoria, our most popular Monroe Shocks and Struts include:
from
$194.99
(7)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Front Shock and Struts
Top 2004 Ford Crown Victoria Shocks and Struts from Monroe
Monroe products are another trusted brand when it comes to Shocks and Struts for your 2004 Ford Crown Victoria. Popular Monroe parts include:
FAQs for 2004 Ford Crown Victoria Shocks and Struts
What are the most purchased Shocks and Struts for the 2004 Ford Crown Victoria?
Out of 10 Shocks and Struts for the 2004 Ford Crown Victoria, the most popular in our inventory are:
from
$106.99
This product is not rated
Complete Strut Assembly 28-710415: Includes Strut, Coil Spring and Mount
Front Shock and Struts
from
$151.99
This product is not rated
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Front Shock and Struts
