Name: Heater Hose Assembly
Brand: Dorman
SKU: R3030359108DOR
Price: 62.53 USD

from

$62.53

Durably engineered to resist corrosion and leakage, Dorman’s HVAC Heater Hose limits the possibility of overheating and subsequent engine damage. Put your engine worries to rest by preserving proper coolant circulation.

Product Features:

Comes with clamps and fittings (where applicable)
Tough rubber and steel construction
Front and rear heating and cooling lines available (where applicable)
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

from

$47.99

GM Genuine Parts PCV Valve Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$38.49

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$30.49

This windshield washer hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this windshield washer hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$248.99

GM Genuine Parts Fuel Return Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$1.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$19.99

The O-rings in this radiator coolant hose O-ring kit are designed to match the fit and function of original equipment O-rings on specified vehicles and are engineered to help securely seal hose connections when an existing O-ring has failed.

Product Features:

Simple fix – this O-ring is specifically manufactured to replace the original lower radiator hose O-ring on specific vehicles
Cost-effective repair – inexpensive alternative to dealership forcing an entire hose replacement just to replace an O-ring
Application specific – made to match the original O-ring on certain Chevrolet and GMC vehicles
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$10.87

Heater Hose Connecto

from

$56.99

This genuine Litens tensioner is manufactured and designed by Litens, the world’s largest manufacturer of belt tensioners. To address shortcomings and common failure points of the original tensioner, Litens has released this new and improved design. A 20% increase in tension results in less noise and belt slip. The main tensioner pivot has been greatly improved to prevent binding frequently experienced with the original part, and a high speed bearing has been implemented to provide long life and reliability._

Product Features:

the world’s largest manufacturer of belt tensioners. To address shortcomings and common failure points of the original tensioner.
Litens has released this new and improved design. A 20% increase in tension results in less noise and belt slip. The main tensioner pivot has been greatly improved to prevent binding frequently experienced with the original part
and a high speed bearing has been implemented to provide long life and reliability.
Professional Mechanics will change this tensioner in approx. 20 minutes.
Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d
Installation instructions included.

from

$52.90

Heater Hose

from

$303.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$105.99

GM Genuine Parts Fuel Supply Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$467.99

This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.

Product Features:

Upgraded replacement – the replacement fuel lines in this kit are made of stainless steel for added corrosion resistance
Pre-formed fit – these lines are already shaped to fit specific applications for easier installation
Complete kit – includes brackets and fittings for thorough repair
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$24.79

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$38.49

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$52.36

AT Cooling Hose

from

$81.99

This replacement fuel injector line is precision-engineered to match the fit and design of the original fuel injector line on specific vehicles. It comes with any vehicle-specific mounting hardware for a complete installation.

Product Features:

Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles
Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership

from

$25.99

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$49.49

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$25.99

This replacement fuel injection feed hose is made to safely transfer fuel and endure in tough underhood and undercar conditions.

Product Features:

Trustworthy replacement – this fuel feed hose safely replaces the original hose to fix fuel leaks
Durable design – withstands tough underhood and undercar conditions
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$56.99

Fuel injector return line kit includes fuel line, injector fittings, fitting seals and retaining clips. Services one side of engine.

Product Features:

Includes fuel return line
Includes 4 plastic injector return fittings
Includes 4 metal fitting clips
Includes 4 fitting O-rings
Premium OE quality materials
Services one side of engine

from

$29.99

Fixing a failed original plastic coolant hose connector usually requires replacing the entire coolant hose assembly. This Dorman OE FIX coolant hose connector is made from aluminum for greater durability and saves expense by allowing the replacement of just the failed connector..

Product Features:

Saves money – directly replace a failed coolant hose connector rather than buying an entire new hose assembly from the original automaker.
Improved design – made of durable aluminum instead of plastic to better resist temperature fluctuations and help prevent future failures
Ensures fit – includes hose clamps for a complete repair and perfect fit on specified makes, models and years
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$280.99

GM Genuine Parts Fuel Feed and Return Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$41.33

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$57.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$47.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards