2004 Chevrolet Blazer Brake Master Cylinders
More 2004 Chevrolet Blazer Brake Master Cylinders
Find your specific 2004 Chevrolet Blazer original or aftermarket Brake Master Cylinders below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2004 Chevrolet Blazer Brake Master Cylinders
Wearever – Remanufactured Brake Master Cylinder (Part No.10-2352)
from
$37.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Wearever – Remanufactured Brake Master Cylinder (Part No.10-1521)
from
$48.49
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Wearever – Remanufactured Brake Master Cylinder (Part No.10-2684)
from
$37.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Wearever – New Brake Master Cylinder (Part No.MCA390259)
from
$82.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
- Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All aluminum castings are “hard anodized”
- All iron castings are coated to prevent rust
- Manufacturers all major components in house.
- Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
- All machining done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
- Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
- Assembly is done in clean room insuring no contamination is introduced into final assembly.
- All assemblies are dated coded for 100% accurate trace-ability.
- Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
Carquest Wearever – Brake Master Cylinder MCA390320: New, With Reservoir (Part No.MCA390320)
from
$78.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
- Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All aluminum castings are “hard anodized”
- All iron castings are coated to prevent rust
- Manufacturers all major components in house.
- Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
- All machining done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
- Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
- Assembly is done in clean room insuring no contamination is introduced into final assembly.
- All assemblies are dated coded for 100% accurate trace-ability.
- Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
Carquest Wearever – Brake Master Cylinder MCA39649: New, With Reservoir (Part No.MCA39649)
from
$73.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
- Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All aluminum castings are “hard anodized”
- All iron castings are coated to prevent rust
- Manufacturers all major components in house.
- Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
- All machining done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
- Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
- Assembly is done in clean room insuring no contamination is introduced into final assembly.
- All assemblies are dated coded for 100% accurate trace-ability.
- Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
Carquest Wearever – Brake Master Cylinder MCA630282: New, With Reservoir (Part No.MCA630282)
from
$155.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability
Product Features:
See More
Product Features:
- All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
- Key components like spring are from high and stable quality suppliers.
- Products are machined by CNC machines with strictly quality control.
- Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
- Direct replacement for a proper fit
- Manufactured to strict engineering quality standards, meets S.A.E. specifications
- Each product is 100% tested on production lines and sampling tested prior to shipment
- Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.038 mm
- Main cylinder hole of measured by the 0.034 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
Carquest Wearever – Brake Master Cylinder MCA630034: New, With Reservoir (Part No.MCA630034)
from
$132.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
- Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All aluminum castings are “hard anodized”
- All iron castings are coated to prevent rust
- Manufacturers all major components in house.
- Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
- All machining done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
- Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
- Assembly is done in clean room insuring no contamination is introduced into final assembly.
- All assemblies are dated coded for 100% accurate trace-ability.
- Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
Carquest Wearever – New Brake Master Cylinder (Part No.MCA76162)
from
$76.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
- Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All aluminum castings are “hard anodized”
- All iron castings are coated to prevent rust
- Manufacturers all major components in house.
- Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
- All machining done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
- Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
- Assembly is done in clean room insuring no contamination is introduced into final assembly.
- All assemblies are dated coded for 100% accurate trace-ability.
- Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Dorman – Help – Master Cylinder Gaskets (Part No.42106)
from
$9.99
This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles
- Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Brake Master Cylinder Gasket (Part No.42077)
from
$11.29
This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles
- Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Brake Master Cylinder Gasket (Part No.42079)
from
$8.99
This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles
- Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Brake Master Cylinder Gasket (Part No.42072)
from
$9.99
This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles
- Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Brake Master Cylinder Cap (Part No.42040)
from
$14.99
This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles
- Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Brake Master Cylinder Gasket (Part No.42074)
from
$9.99
This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles
- Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Master Cylinder Caps (Part No.42042)
from
$9.49
This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles
- Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Master Cylinder Caps (Part No.42041)
from
$14.99
This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles
- Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Master Cylinder Gaskets (Part No.42108)
from
$21.29
This brake master cylinder reservoir cap and gasket kit matches the original parts required to repair a damaged or leaking reservoir cap on specified vehicles. Made of quality components, this kit is engineered for reliability.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder reservoir cap kit matches the original parts to repair a damaged or leaking master cylinder reservoir cap on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are leaking or have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 2004 Chevrolet Blazer Brake Master Cylinders Categories
2004 Chevrolet Blazer Brake Master Cylinders
Maybe you’re in the middle of a full rebuild of that 2004 Chevrolet Blazer. Maybe you just need a couple of Brake Master Cylinders. Either way, Advance Auto Parts has 8 different Brake Master Cylinders in our inventory ranging from $9.49 to $155.99. That means you can find the exact parts or products you need to keep that 2004 Chevrolet Blazer running smoothly.
Brake Master Cylinders are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Chevrolet Blazer. Dorman, Cardone, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Brake Master Cylinders for your 2004 Chevrolet Blazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 66 reviews in this category, some of the top rated parts include Brake Master Cylinder MCA630282: New, With Reservoir with 4.3 stars.
So if you’re in the market for aftermarket Brake Master Cylinders to keep your 2004 Chevrolet Blazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Brake Master Cylinders Brands To Make Your 2004 Chevrolet Blazer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Chevrolet Blazer demands trusted brand parts and products to keep it running. Many trusted brands of Brake Master Cylinders make up Advance Auto Parts’ inventory, and all are ready to help make your Blazer the best it can be. Be sure to browse some of our top Brake Master Cylinders brands and parts.
Popular Cardone Brake Master Cylinders
We carry Cardone parts in our stock across Brake Master Cylinder Bleeders categories, plus more. For a 2004 Chevrolet Blazer, our most popular Cardone Brake Master Cylinders include:
Top 2004 Chevrolet Blazer Brake Master Cylinders from Dorman – Help
Dorman – Help products are another trusted brand when it comes to Brake Master Cylinders for your 2004 Chevrolet Blazer. Popular Dorman – Help parts include:
FAQs for 2004 Chevrolet Blazer Brake Master Cylinders
What are the most purchased Brake Master Cylinders for the 2004 Chevrolet Blazer?
Out of 8 Brake Master Cylinders for the 2004 Chevrolet Blazer, the most popular in our inventory are:
What are the top-rated 2004 Chevrolet Blazer Brake Master Cylinders?
Top-rated Brake Master Cylinders for your 2004 Chevrolet Blazer based on customer reviews/ratings are:
from
$155.99
(9)
Brake Master Cylinder MCA630282: New, With Reservoir
“This of course is much needed on our vehicles and it performs wonderful !”
