from

$39.99

Shock Kit

from

$26.49

CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications. CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Engineered to reduce road noise and provide a stable ride.
Hardware included for easier installation (where applicable)

from

$131.99

The Gas-a-just monotube shock absorber is available as an OE monotube replacement to restore your vehicles original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and con

Product Features:

The Correct, Monotube-Designed Orem Replacement
The KYB Gas-A-Just Helps Restore The Designed Control And Handling Of Full-Size Gm Trucks
Gas-A-Just Monotubes Are Designed For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
A Teflon-coated or phenolic piston band that reduces friction and provides a positive cylinder seal
Specially formulated hydraulic fluid with multi-range viscosity for any weather climate

from

$6.29

POWER STEERING FLUID

from

$15.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$1327.99

Ride sagging? Don’t want to pay to repair the original air suspension? Convert to a high-quality conventional suspension with this air spring to coil spring conversion kit. Corrosion-resistant steel springs maintain a smooth ride without the cost.

Product Features:

Alternative replacement – this air suspension delete kit replaces the original air suspension with a conventional suspension
Cost-saving solution – ideal for older vehicles on which maintaining the original air suspension isn’t necessary or too costly
Complete kit – includes all necessary hardware and components needed for conversion
Thoroughly tested – parts underwent ride handling testing to ensure performance

from

$25.99

Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

from

$431.10

Suspension Compresso

from

$34.49

This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$258.99

Arnott’s premium rear shock for GM vehicles equipped with air-assisted suspensions is an ideal replacement for a failing rear shock. This top-of-the-line shock, engineered in the USA, delivers control, stability, performance, and comfort. Arnott’s new aftermarket shock connects to the vehicle’s auto-leveling system with no modifications and includes a bypass resistor to turn off dashboard warning lights for the auto-damping control unit. These rear shocks should be replaced in pairs. Not applicable for vehicles w/Magneride suspension.

from

$46.99

The suspension ride height sensor connector rod is a link connecting the vehicle’s suspension to the ride height sensor to communicate the appropriate ride height of the vehicle. The Dorman Ride Height Sensor connector Rod reduces installation time and saves you money. Now you can easily replace the failed original rod, without the expense and hassle of replacing the entire assembly. Additionally, the ride height sensor connector rod is quality tested and ensures a proper fit every time.

Product Features:

Direct replacement for a proper fit every time
Constructed of durable steel for long service life
Prevents vehicle from becoming stuck in one position
This part is quality tested for conformance to product standards

from

$306.99

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
Economical And Trouble Free
Simple And Easy To Install

from

$163.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Sensor, arm, mounting bracket and all other parts are included for easy installation
Delphi sensors are built to meet or exceed OE requirements and testing
Designed to perform in the most demanding automotive environments including rocks, mud, salt, ice and snow
Located behind each tire, the sensors deliver ride control and suspension leveling

from

$813.99

While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:

Designed To Provide Inflation Control Of Your Air Helper Springs
Provides An Instant Air Source For The Air Helper Springs Or Accessories
Single Point Fill (Both Air Springs Fill To The Same Pressure)
Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)

from

$26.23

Coil Spring Insulato

from

$24.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
STRONG AND DURABLE — Engineered to match or exceed OE requirements
RESTORES RIDE — Provides revamped steering and handling feel
QUIET DRIVE — Replacement can reduce front end noise

from

$25.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$487.99

Monroe® Specialty Shock Absorbers are direct fit replacements for vehicles equipped with factory air or electronic suspension. Available for popular passenger car, light truck and SUV applications.

Product Features:

Direct OE style replacement
100% compatible with the factory air or electronic suspension system
OE style air/electric connectors
Available for most popular applications
Restores your vehicle factory ride height and provides a stable comfortable ride

from

$254.99

Quick Strut Kit

from

$41.99

This air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have failed due to damage or fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$95.65

SACHS Suspension Strut Mount repair kits are designed to return the mount and bearing to Original Equipment standards.

Product Features:

SACHS Suspension Strut Mounts meet or exceed the OE designed specifications for the vehicle.
SACHS Strut Mounts are designed to restore smooth steering while reducing vibrations and noise.
It is highly recommended to replace your mounts, shocks and or struts in pairs.

from

$34.99

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$119.99

PassiveSuspConvKt

from

$228.24

Suspension Ride Heig

from

$306.99

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
Economical And Trouble Free
Simple And Easy To Install

from

$6.79

Driveworks control arm bushings are high-quality, cost-effective parts. They help prevent wear to more expensive or less easily replaced parts, and they absorb vibration that would be transmitted to the interior of the car. Driveworks chassis parts ensure improved steering response and durability to your vehicle.

from

$109.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$254.82

Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm and Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

Ball joints and bushings (when applicable) included for a complete installation, saving time and labor (where applicable)
Direct replacement for a trouble-free installation
Steel, iron or aluminum construction ensures durability
Powder-coated or painted for long-lasting rust and corrosion resistance