2003 Toyota Celica Car Parts & Accessories

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal
• Non-Stick Back-Up Ring
• Hardened Nitride Plated Steel Shaft
• Engineered In USA To OE Quality Standards For Performance And Durability
• IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
• Easy To Install In Just Minutes. No Special Tools Required.
• Exact Fit Original Equipment Design Guarantees Correct Fit And Function
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal
• Non-Stick Back-Up Ring
• Hardened Nitride Plated Steel Shaft
• Engineered In USA To OE Quality Standards For Performance And Durability
• IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
• Easy To Install In Just Minutes. No Special Tools Required.
• Exact Fit Original Equipment Design Guarantees Correct Fit And Function
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

This center console latch is designed to match the fit and function of the original latch on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this center console latch is designed to match the fit and function of the original latch on specified vehicles
• Restores functionality – this latch is made to fit and fully restore part functionality after the original latch fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

New Standard Replacement Hood Panel

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal
• Non-Stick Back-Up Ring
• Hardened Nitride Plated Steel Shaft
• Engineered In USA To OE Quality Standards For Performance And Durability
• IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
• Easy To Install In Just Minutes. No Special Tools Required.
• Exact Fit Original Equipment Design Guarantees Correct Fit And Function
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Hatch Strut

Hatch Strut

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Center Console Latch

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 10″ x 15-7/8″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

• Imperial Maxi-Cool® plate and fin transmission cooler
• Size: 3/4″ x 11″ x 7-1/2″
• Mid-size and full-size cars, pickups
• GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Product Features:

• Imperial Rapid-Cool« plate and fin transmission cooler
• Size: 3/4″ x 11″ x 6″
• Sub-compact to compact cars
• GVWR up to 18,000 lbs.
• Compatible with OEM cooler systems

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Product Features:

• Imperial Econo-Kool« tube and fin transmission cooler
• Size: 3/4″ x 5″ x 15-7/8″
• Compact and mid-size cars
• GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Product Features:

• Imperial Econo-Kool« tube and fin transmission cooler
• Size: 3/4″ x 5″ x 12-1/2″
• Sub-compact to compact cars
• GVWR up to 12,000 lbs.
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Product Features:

• Imperial Rapid-Cool« plate and fin transmission cooler
• Size: 3/4″ x 11″ x 9-1/2″
• Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
• GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
• 33% more efficient than a comparable tube and fin design

Product Features:

• Mid-size and full-size cars, pickups
• GVWR up to 18,000 lbs.; towing up to 3,500 lbs
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 15-7/8″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 90 minutes

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 12-1/2″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

• Direct-fit OE replacement ensures ease of installation
• Designed to meet OE performance
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

This automatic transmission speed sensor matches the fit and function of the original equipment sensor to restore critical speed-dependent vehicle functions. This part has been engineered and rigorously tested to ensure reliable performance.

Product Features:

• Direct replacement – this automatic transmission speed sensor matches the fit and function of the original equipment sensor
• Durable construction – this sensor is engineered to precise standards to ensure accurate signal output
• Easy installation – this sensor is installed using the original hardware and plugs into the vehicle’s existing wiring
• Quality tested – this part has undergone try-on validation and rigorous quality testing to ensure a quality fit and long service life

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• NTK’s Automatic Transmission Speed Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of the transmission’s speed.
• The Automatic Transmission Speed Sensor sends information to the vehicle’s control units (ECU, TCU, or PCM) to precisely perform functions such as shift points, ignition timing and air/fuel ratio.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

• Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
• Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on testing to ensure a quality fit

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Design improvements include extended life and quiet operation
• Industry leading coverage
• Professional technicians know they can depend on National

LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.

Product Features:

• OE quality and direct fit application
• Made from high quality steel
• Designed to reduce clutch chatter and vibration
• Dynamically balanced

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.

Product Features:

• OE quality and direct fit application
• Made from high quality steel
• Designed to reduce clutch chatter and vibration
• Dynamically balanced

All Exedy Pressure Plate assemblies endure a precise robotic testing process to ensure proper clamp load and clutch lift separation. This step ensures optimal pedal feel for better drivability. To help guarantee durability, the diaphragm spring (dark fingers in the center) receives special high frequency induction heat treating. This helps prevent the wear that normally occurs at the contact surface of the release bearing. Together, these procedures provide you a like-new pedal feel throughout the life of your clutch.

Product Features:

• OE Quality
• Direct fit application
• Super low wear diaphram spring
• Specially high frequency induction heat treatment

Engineered to exacting OE Specifications, The AISIN Clutch Disc is designed to deliver optimal drivetrain efficiency. One of Asian’s unique and innovative technologies, the NVR (Noise Vibration Reduction) Clutch proves performance and environmental awareness can go hand in hand. The NVR clutch system has been adopted into the automotive industry as Original Equipment.

Product Features:

• OE Quality and a direct fit application.
• Improved product life by adopting facings with excellent heat and wear resistance.
• Clutch drag prevented by using circumferential grooves in the facings and ensuring sufficient groove depth.
• Improved spline sliding properties by using nickel coated splines.
• Smoother clutch engagement by adopting facings with excellent anti-shudder properties.
• Reduced drive system vibration and noise through the use of a rigid clutch disc structure and reduced deflection of immobile cushion rubbers.

Product Features:

• Brand may vary by location

Freeze Plug Heater Cartridge made of cast aluminum. Interchangeable with the manufacturers original equipment-the only cost effective aftermarket solution available. Installs easily, just install in engine block core hole. No longer necessary to remove frost plug or drain coolant-just coat wit NSCG silicone grease G-624 (not included), insert, and clip into place. Original equipment for Toyota, Chrysler-jeep, Hyundai, Kia, and General Motors applications (see application guide for details). Simplified application information-Entire range of manufacturers applications covered by only five part numbers.

Product Features:

• Freeze plug heater cartridge

Remotes Unlimited is the leading supplier of replacement remote transmitters and related products for factory keyless entry and add-on alarm/remote start systems.

Product Features:

• New REMOTES UNLIMITED replacement for TOYOTA original equipment part
• 4 Buttons: Lock – Unlock – Rear Window Rolldown (or Trunk) – Panic (on back)
• CR2016 battery included
• TOYOTA #: 89742-0C010 89742-0C030 89742-35020 89742-35021 89742-35040 89742-35050
• FCC ID 2AHZT-TORK22 on part
• This part can replace any 3-button or 4-button remote with FCC ID HYQ12BAN HYQ12BBX or HYQ1512Y
• This part does NOT replace similar-looking remotes with FCC ID GQ43VT14T
• Transmitter must match the keyless entry system and options in the vehicle
• For specification help, contact RUI or search www.AdvanceAutoFob.com by FCC ID, OE number or MMY
• USER PROGRAMMABLE – User can program system to accept this part if vehicle components are working
• Programming instructions and free phone technical support are included with purchase

The Budge Ultra Car Cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our Ultra car covers are fully breathable, with ultra-sonically welded seams for added durability. This soft, nonabrasive material will not harm the surface of your vehicle. Designed for indoor and outdoor use, the Ultra Car Cover is designed to be breathable while it protects your vehicle. This improves airflow to reduce condensation and helps prevent mold and mildew. The Ultra cover features a full elastic hem and built-in grommets. This cover is gray in color and includes a storage bag and antenna patch. Designed to fit, this car cover fits cars 200″ L x 60″ W x 51″ H.

Product Features:

• This car cover fits cars up to 200″ L x 60″ W x 51″ H
• This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
• This car cover is water resistant and features ultrasonically welded seams for extra durability
• Cover is suitable for short term outdoor protection and long-term indoor protection
• Elasticized hem and sewn-in grommets for a secure fit

Autocraft Easy Fit Car Cover offers superior protection against dirt, dust, rain and snow. Protects against acid rain, pollution and color fading UV rays. Durable, reinforced seams and elastic hems. Convenient storage bag included.

Product Features:

• Lightweight, breathable, non-abrasive fabric
• Water repellent, protects against mold and mildew
• Full elastic hem with reinforced grommets
• Full elastic and double stitched hem to ensure a better fit
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to to provide additional protection from water or dust soak into the hole that you cut for antenna.

Autocraft Easy Fit Car Cover offers superior protection against dirt, dust, rain and snow. Protects against acid rain, pollution and color fading UV rays. Durable, reinforced seams and elastic hems. Convenient storage bag included.

Product Features:

• Medium weight, breathable, non-abrasive fabric
• Water repellent, protects against mold and mildew
• Full elastic hem with reinforced grommets
• Full elastic and ultrasonic sewn hem to ensure a better fit and extreme durability
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to to provide additional protection from water or dust soak into the hole that you cut for antenna.

HIGHLAND all weather floor mats offer the ultimate protection for front and rear floors. These durable, pliable floor mats will not stiffen or crack even in the harshest of weather conditions. Protect your investment and increase your resale value with these high quality floor mats.

Product Features:

• Easily installed and removed – no tools required
• Designed to fit your specific vehicle contours
• Raised ridges confines dirt and water to keep your vehicles carpet clean
• Anti-skid spikes on back of mats prevent the mat from slipping

Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

• Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
• Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
• Reliable construction – keeps moisture and debris out of internal electronics for long service life
• Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

• Capacity: 10 cu ft
• Dimensions: 36″ L x 30″ W x 16″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

The Rightline Gear Car Top Duffle Bag is a 100% waterproof gear bag that you can pack, strap to the roof of your vehicle, transport, and then carry wherever you need to go. Attach (1) to (4) Duffle Bags to vehicles WITH or WITHOUT a roof rack. Each bag comes with a removable shoulder strap that can be stored in the bag’s zippered side pocket when not in use. The bag is made from tough PVC Coated Mesh that is re-enforced for strength and UV protected. The Car Top Duffle Bag defines travelling efficiency!

Product Features:

• Capacity: 4.3 cu ft
• Dimensions: 36″ L x 16″ W x 13″ H
• 100% Waterproof with welded seams, urethane coated zippers, and a hook-&-loop-close zipper cover
• Designed to be used on any size vehicle, WITH or WITHOUT a roof rack
• Includes: bag, shoulder strap, (2) attachment straps, (4) Car Clips, and set up guide
• Includes: duffle bag, (2) nylon straps, (4) Car Clips, and complete set up guide

One Key Technology Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.

Need a new key fob? This DIY keyless remote is designed to match the appearance and function of the original on specific vehicle years, makes, models and configurations. With easy-to-follow instructions, you can program it yourself in minutes, and rely on it for years.

Product Features:

• Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
• Do-it-yourself solution – follow the simple onboard programming procedure in the included instructions to set up your new fob in minutes
• Durable construction – made from quality, drop-resistant components to ensure reliable performance and long service life
• Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

• Saves wear and tear on your engine
• Simple installation directly into engine block

Engine Heater; Replacement Cord

The Range Jr Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

• Dimensions: 36″ L x 32″ W x 15″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• Weatherproof + with welded seams and a urethane coated zipper
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

As the most heavy duty car covers on the market, the WeatherShield HD car cover is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD car covers are constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other car covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.

Product Features:

• The most heavy-duty car cover on the market
• Specially treated to resist fading and color transfer
• Sheds water and blocks out dust
• Outsmart the outdoors!

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

For those who like traditional woven fabrics for indoor car cover protection, the Tan Flannel is the perfect choice. This is a high performance indoor fabric with a durable Polycotton blend on the outside and a flannel underside soft napped finish. Its long wearing and breathable. Specially treated to repel moisture and resist rot and mildew.

Product Features:

• A favorite amongst car enthusiasts
• Flannel lined for an ultra-soft, paint-friendly cover
• Constructed from all cotton based materials
• Our ‘classic’ indoor cover

Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray.

Product Features:

• Good basic indoor protection
• Drill weave Polycotton blend
• Resists tears and punctures
• Treated to resist rot and mildew

Pants Saver Custom Fit 4pc Car floor Mat Set for Toyota CELICA 2003 ,Tan : Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout of your Toyota CELICA 2003 floor so they install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C ). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

• Custom fit Mats for Your Vehicle No cutting required; Water Proof: Yes ; Wear Resistance: Yes.
• Unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. Pants Saver custom fit mats helps you to protect your car.
• Odorless and suitable for All Weather. Proudly Made In North America
• Superior All weather performance, Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver exact fit floor mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C )
• Box Contains 4Pcs x Car Mats. Please feel free to email us if you have any questions. We will provide the best service for you!
• Custom Fit Car Mats
• Anti Skid
• Raised Borders
• All Weather Protection
• Odorless

Pants Saver Custom Fit 4pc Car floor Mat Set for Toyota CELICA 2003 ,Black : Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout of your Toyota CELICA 2003 floor so they install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C ). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

• Custom fit Mats for Your Vehicle No cutting required; Water Proof: Yes ; Wear Resistance: Yes.
• Unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. Pants Saver custom fit mats helps you to protect your car.
• Odorless and suitable for All Weather. Proudly Made In North America
• Superior All weather performance, Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver exact fit floor mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C )
• Box Contains 4Pcs x Car Mats. Please feel free to email us if you have any questions. We will provide the best service for you!
• Custom Fit Car Mats
• Anti Skid
• Raised Borders
• All Weather Protection
• Odorless

Pants Saver Custom Fit 4pc Car floor Mat Set for Toyota CELICA 2003 ,Gray : Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout of your Toyota CELICA 2003 floor so they install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C ). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

• Custom fit Mats for Your Vehicle No cutting required; Water Proof: Yes ; Wear Resistance: Yes.
• Unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. Pants Saver custom fit mats helps you to protect your car.
• Odorless and suitable for All Weather. Proudly Made In North America
• Superior All weather performance, Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver exact fit floor mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C )
• Box Contains 4Pcs x Car Mats. Please feel free to email us if you have any questions. We will provide the best service for you!
• Custom Fit Car Mats
• Anti Skid
• Raised Borders
• All Weather Protection
• Odorless

Lit Plug Version Of #3100129

HIGHLAND all weather floor mats offer the ultimate protection for front and rear floors. These durable, pliable floor mats will not stiffen or crack even in the harshest of weather conditions. Protect your investment and increase your resale value with these high quality floor mats.

Product Features:

• Easily installed and removed – no tools required
• Designed to fit your specific vehicle contours
• Raised ridges confines dirt and water to keep your vehicles carpet clean
• Anti-skid spikes on back of mats prevent the mat from slipping

New Standard Replacement Front Driver Side Undercar Shield

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This High Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact and lightweight and they meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

Keys come in many shapes and sizes. Non-transponder keys, such as these, require no special programming. They will need to be cut by a locksmith or automotive professional.

Product Features:

• Compatible with select Pontiac, Scion, and Suzuki Vehicles
• Requires no special programming
• Comes with uncut key blade

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• High-quality products that meet OE appearance and performance to

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Our parts are 100% tested to verify both mechanical and electrical switching performance.
• Decades of industry leading research and development focused on meeting the technician’s needs
• Robust design and high grade materials meet the stringent demands of today’s service professional
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

The airbag clockspring is one piece of the passenger restraint system. The restraint airbag located in the driver’s steering wheel is hardwired, meaning the airbag has a directly wired connection to the vehicle passenger restraint module. The clockspring is located within the steering column just below the airbag assembly and contains a spirally wound flat ribbon conductor within it. As the steering wheel is rotated during normal driving conditions the electrical connection between the air bag and the restrain module remains complete.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

• Unique warp-knit design fits perfectly with today’s vehicle interiors
• Compliments technical fabrics in newer vehicles
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Vents and sensor openings pre-cut for a factory finish look
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

• Unique warp-knit design fits perfectly with today’s vehicle interiors
• Compliments technical fabrics in newer vehicles
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Vents and sensor openings pre-cut for a factory finish look
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s #1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

Product Features:

• Optimally positions key performance data within driver’s field of vision
• Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
• Black textured finish which can be painted to match your interior if desired
• High quality, composite construction is incredibly durable and looks great
• Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

• Needa Parts offers a complete assortment for all popular makes and models
• Vehicle make specific fastener kits are available
• All fasteners meet or exceed OEM standards