Toyota Celica Parts

Toyota Celica Body Parts

from

$649.99

New Standard Replacement Hood Panel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$541.99

New Standard Replacement Front Bumper Cover, Without Air Conditioningtion Package

Product Features:

Without Air Conditioningtion Package, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.99

Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:

Ideal replacement – this window crank handle matches the fit and function of the original equipment component
Durable construction – this window crank handle is made of durable material to withstand extended use
Easy to install – this window crank requires no special tools to install
Versatile design – this window crank handle is suitable for use in various locations in the vehicle

from

$44.99

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal
Non-Stick Back-Up Ring
Hardened Nitride Plated Steel Shaft
Engineered In USA To OE Quality Standards For Performance And Durability
IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
Easy To Install In Just Minutes. No Special Tools Required.
Exact Fit Original Equipment Design Guarantees Correct Fit And Function
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$62.99

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$77.99

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$19.99

This center console latch is designed to match the fit and function of the original latch on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this center console latch is designed to match the fit and function of the original latch on specified vehicles
Restores functionality – this latch is made to fit and fully restore part functionality after the original latch fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$59.99

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$216.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Door Switch is a versatile component that can control various functions such as door locks, windows, or side mirrors. Whether used for a single function or multiple operations, it offers reliable control and enhances the driver’s convenience. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$55.99

Application matched component to ensure the system can be returned to like new condition.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$4.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$54.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$17.79

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. Vehicle switches provide versatile control for various electrical functions within the vehicle, enhancing convenience and safety by allowing drivers to easily operate features such as lights, wipers, and accessories with a simple flick or press. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$39.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$39.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$7.29

This fuel door spring is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this fuel door spring matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

This door hinge is designed to match the function of an original equipment hinge on specified vehicles. It is engineered to securely connect a door and door frame to help restore proper door operation and replace a rusted, failed, or damaged hinge.

Product Features:

Direct replacement – this door hinge is designed to match the fit, function and performance of an original equipment hinge on specified vehicles
Ideal solution – engineered to securely connect a door and door frame to help restore proper door operation, and seamlessly replace a rusted, failed, or damaged hinge
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Toyota Celica Transmission Parts

from

$8.49

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$190.99

This transaxle output speed sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this transaxle output speed sensor is designed to match the fit and function of the original sensor on specified vehicles
Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$18.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$151.99

This automatic transmission speed sensor matches the fit and function of the original equipment sensor to restore critical speed-dependent vehicle functions. This part has been engineered and rigorously tested to ensure reliable performance.

Product Features:

Direct replacement – this automatic transmission speed sensor matches the fit and function of the original equipment sensor
Durable construction – this sensor is engineered to precise standards to ensure accurate signal output
Easy installation – this sensor is installed using the original hardware and plugs into the vehicle’s existing wiring
Quality tested – this part has undergone try-on validation and rigorous quality testing to ensure a quality fit and long service life

from

$10.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$14.49

AT SEAL DRIVE AXLE

from

$9.29

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$77.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$15.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$3.49

Product Features:

Brand may vary by location

from

$172.99

Shift Solenoid

from

$16.99

Design type: spring loaded; multi-lip
Temperature range: – 0 Deg. F to 450 Deg. F / – 3 Deg. C to 232 Deg. C
Excellent dry running capabilities
Low coefficient of friction
Delivers quality and reliable performance for every type of repair

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$40.99

Product Features:

Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.

from

$6.49

Product Features:

Brand may vary by location

from

$186.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$89.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 94-97;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-1997
Weight approx: 4 Lbs

from

$4.29

These automatic transmission drain plug gaskets are designed to match the fit and function of the original gaskets required to repair the drain plug on specified vehicles, and are made of durable materials for reliable service.

Product Features:

Direct replacement – these automatic transmission drain plug gaskets are designed to match the fit and function of the original gasket required to repair the plug on specified vehicles
Ideal solution – recommended for replacement when transmission is serviced, or for an original gasket that is leaking
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$14.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.99

AT SEAL DRIVE AXLE

Toyota Celica Clutch Systems

from

$27.49

Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$62.99

from

$176.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$161.99

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$14.99

Engineered from high-quality materials to ensure chemical and thermal resistance, our Clutch Hydraulic Hose restores and maintains optimal clutch performance.

Product Features:

Direct replacement for a proper fit every time
Integral brackets included for ease of installation (where applicable)
Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met
Brand may vary by location

from

$16.99

Leaky or cracked hydraulic hose? This replacement hose is precision-engineered to match the original clutch hoses on specific vehicles as part of a complete, reliable clutch repair job.

Product Features:

Direct replacement – this clutch hose is made to match the original hose on specific vehicles
Thoroughly tested – validated to 4,000 PSI tolerance to ensure product safety standards
Durable construction – made of high-grade materials designed for optimal chemical and thermal resistance
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$21.99

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$33.49

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$35.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$37.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$21.49

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$18.49

This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.99

Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$43.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$22.49

from

$27.99

from

$43.99

The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Manufactured to meet or exceed original equipment specs
Eliminates grinding from damaged teeth
Increases starter drive life

from

$30.99

FLYWHEEL SHIM

from

$22.99

FLYWHEEL SHIM

from

$144.99

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

from

$135.99

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$182.99

M/T FLYWHEEL

from

$85.99

from

$153.99

Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$91.99

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

Toyota Celica Automotive Accessories

from

$17.99

Keys come in many shapes and sizes. Non-transponder keys, such as these, require no special programming. They will need to be cut by a locksmith or automotive professional.

Product Features:

Replacement Transponder Key for Toyota & Plymouth Vehicles
Requires no special programming
Comes with uncut key blade

from

$23.99

Keys come in many shapes and sizes. Non-transponder keys, such as these, require no special programming. They will need to be cut by a locksmith or automotive professional.

Product Features:

Compatible with select Pontiac, Scion, and Suzuki Vehicles
Requires no special programming
Comes with uncut key blade

from

$109.99

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

Capacity: 10 cu ft
Dimensions: 36″ L x 30″ W x 16″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$63.99

Freeze Plug Heater Cartridge made of cast aluminum. Interchangeable with the manufacturers original equipment-the only cost effective aftermarket solution available. Installs easily, just install in engine block core hole. No longer necessary to remove frost plug or drain coolant-just coat wit NSCG silicone grease G-624 (not included), insert, and clip into place. Original equipment for Toyota, Chrysler-jeep, Hyundai, Kia, and General Motors applications (see application guide for details). Simplified application information-Entire range of manufacturers applications covered by only five part numbers.

Product Features:

Freeze plug heater cartridge

from

$81.99

Circulation Tank Heater is Available in 850W, 1000W, 1500W, and 2000W, 120V and 240V. This heater is thermostatically controlled 135 degrees-175 degrees. Moderate mechanical ability is required for installation. Uses versatile strap type mounting.

Product Features:

Available for all size engines
Equipped with check valve
Fits most liquid cooled engines
Installations easier and simpler
New lower radiator hose connectors

from

$49.99

AVS In-channel Ventvisors offer a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle.

Product Features:

Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Low-Profile Design
Installs In The Window Channel For A Sleek, Aerodynamic Appearance
Made From Durable, Impact-Resistant Acrylic
Available In Dark Smoke Finish

from

$16.99

Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
Reliable construction – keeps moisture and debris out of internal electronics for long service life
Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

from

$13.99

Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
Reliable construction – keeps moisture and debris out of internal electronics for long service life
Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

from

$217.99

The Protector V car cover features 5 durable layers to ensure 100% waterproof protection. This car cover is made from three layers of polypropylene that rests on top of a fully waterproof membrane. The inner most layer is made from a nonabrasive fleece material so you won’t have to worry about scratching your vehicle. The Protector V is UV resistant, waterproof, breathable and durable making it ideal for all-weather protection. Cover comes with a built in strap and buckle system. Our covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 200″ L x 60″ W x 51″ H.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H.
This car cover is made from 5 durable layers – our thickest cover yet!
This car cover is 100% waterproof and UV resistant for superior outdoor protection
This auto cover has a soft fleece inner lining that pampers your vehicle’s paint
Built-in strap and buckle system keeps your car cover secure

from

$69.99

The Ultra car cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our duor car covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your vehicle. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
This car cover is water resistant and features ultrasonically welded seams for extra durability
Cover is suitable for short term outdoor protection and long-term indoor protection
This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

from

$45.99

The Budge Basic car cover offers single layer, basic protection against dust and debris – at a budget friendly price. Lightweight and easy to use, this vehicle cover is perfect for indoor use or occasional outdoor protection. The Budge Basic car cover is constructed from a single layer of polypropylene. This material is fully breathable to prevent mold and mildew. This cover is nonabrasive and will not harm your vehicle’s exterior. Our Budge Basic car covers are light gray in color. This is a suitable indoor and short term outdoor cover for your car. Our covers are available in a variety of sizes that will popular car makes and models. Cover includes a storage bag and antenna patch.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
This car cover is suitable for indoor and short term outdoor storage
This vehicle cover features double stitched seams for added durability
A full elastic hem helps keep the car cover securely on your vehicle
Will defend against dust, dirt, bird droppings, tree sap and more

from

$25.99

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

FIAMM AM80SX HIGH note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle
133dB at 4″, 12V

from

$19.99

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
Universal Fit
FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle. Proven to offer outstanding resistance to wear and tear
133dB @ 4″, 12V

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For A Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive
Backed By A Limited Lifetime Warranty

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$129.99

Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$35.99

The Universal Car Remote Classic has an easy “no tools” setup, replaces 156 remotes, and is compatible with 5 million vehicles from 1997-2016. There’s never been an easier way to provide remote replacement.

Product Features:

Introducing world’s first and only universal car remote for vehicles from 1997-2016.
Compatible with 5 million vehicles from 1997-2016
Freshly installed battery included

from

$158.99

Need a new key fob? This DIY keyless remote is designed to match the appearance and function of the original on specific vehicle years, makes, models and configurations. With easy-to-follow instructions, you can program it yourself in minutes, and rely on it for years.

Product Features:

Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
Do-it-yourself solution – follow the simple onboard programming procedure in the included instructions to set up your new fob in minutes
Durable construction – made from quality, drop-resistant components to ensure reliable performance and long service life
Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

Toyota Celica Interior Products

from

$54.99

Standard Installation Kit. This is the standard Grant Steering Wheel Installation Kit. These kits may be used to install all Classic Series, Challenger Series or Signature Series Steering Wheels. Each kit contains complete step by step instructions, a die cast hub, grade 5 hardware and matte black trim pieces.

Product Features:

Use To Install All Classic, Challenger Or Signature Series Wheels
Each Kit Contains Complete Step By Step Instructions, A Die Cast Hub, Grade 5 Hardware And Matte Black Trim Pieces
Matte Black Trim Pieces
Use with all Grant Classic/Challenger/Signature Steering Wheels

from

$268.99

The Automatic Headlight Sensor is a photoelectric device that reacts to ambient light conditions reporting to the body control module which will turn the headlights on or off based ambient light conditions.

Product Features:

Application matched components ensure the automatic headlight system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
This part will look and function just like the original sensor.

from

$47.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$43.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$21.99

The Am-80SX is designed to provide lightweight compact size, yet powerful sound. It exceeds S.A.E. and O.E.M specifications for a wide range of vehicle application.

Product Features:

Features corrosion resistant steel housing and universal mounting bracket.
FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle
Available in high and low tone
125 @ 4″, 12V

from

$50.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Pedal Position Switch detects the position of the accelerator pedal, providing essential input to the vehicle¿s engine control unit for optimal performance and efficient fuel management. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$393.99

The airbag clockspring is one piece of the passenger restraint system. The restraint airbag located in the driver’s steering wheel is hardwired, meaning the airbag has a directly wired connection to the vehicle passenger restraint module. The clockspring is located within the steering column just below the airbag assembly and contains a spirally wound flat ribbon conductor within it. As the steering wheel is rotated during normal driving conditions the electrical connection between the air bag and the restrain module remains complete.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$19.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$8.29

This window crank handle knob is designed to match the fit of an original equipment knob on specified vehicles. It is engineered to help ensure proper window opening and closing functionality and replace a knob that is unsightly, missing, or damaged.

Product Features:

Direct replacement – this window crank handle knob is designed to match the fit, function and performance of an original equipment knob on specified vehicles
Ideal solution – engineered to help ensure proper window opening and closing functionality, seamlessly replace a knob that is missing or damaged, and restore the appearance of the vehicle interior
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$49.99

Product Features:

Optimally positions key performance data within driver’s field of vision
Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
Black textured finish which can be painted to match your interior if desired
High quality, composite construction is incredibly durable and looks great
Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior

from

$112.99

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$88.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Combination Switch provides centralized control of multiple vehicle functions such as headlights, turn signals, and wipers, enhancing driver convenience and safety by allowing seamless operation from a single control point. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$7.99

Pedal cover worn out or missing? This brake pedal pad is a direct replacement for a cracked, worn or missing pad, restoring a safe gripping surface to the brake pedal for safety and comfort.

Product Features:

Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover
Durable materials – this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver’s shoe
Easy installation – this pad slides onto the brake pedal and requires no special tools or hardware
Quality tested – this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle’s application

from

$11.99

ATP Speedometer Cable Core Kit provides a lower cost alternative to cable repair when the cable core has broken or kinked. Each kit includes 0.130″ diameter S.A.E./O.E.M. standard multi-coiled wire cable with squared end, universal metal tip and spacer washer. Cut cable end to desired length and attach tip using staking tool (included). The overall length of the cable core is 83″.

Product Features:

Easy to install
Will fit many custom applications
Low cost alternative

from

$45.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$74.99

Accelerator cables connect the foot pedal to either the carburetor or EFI assembly. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP accelerator cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes brackets, grommets, etc to match original
Fit and function like the original parts
Restores normal operation

from

$70.99

Includes brackets, grommets, etc to match original
Fit and function like the original parts
Restores normal operation

from

$4.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

Needa Parts offers a complete assortment for all popular makes and models
Vehicle make specific fastener kits are available
All fasteners meet or exceed OEM standards

from

$21.99

Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes Cable Lube
Plastic sheath protects cable from debris and water
Comes ready to install

from

$18.99

Includes Cable Lube
Plastic sheath protects cable from debris and water
Comes ready to install

from

$23.99

Includes Cable Lube
Plastic sheath protects cable from debris and water
Comes ready to install

from

$10.99

Includes Cable Lube
Plastic sheath protects cable from debris and water
Comes ready to install

Looking for the best Toyota Celica aftermarket replacement parts? Replacing worn and broken parts on your Toyota Celica? Check out our online catalog to find the best selection of aftermarket Toyota Celica parts as well as real user reviews on Toyota Celica replacement parts. Make an informed decision about every component you add to your Celica.

At Advance Auto, we’ve got you covered when it comes to getting your Toyota Celica in tip top condition. We’ve got over 3,318 Toyota Celica parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our Toyota Celica parts catalog to compare OEM and aftermarket parts for your Toyota Celica.

Whether you need Toyota Celica body parts, interior components, or custom Toyota Celica parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your Toyota Interior Products same day? No problem, you can pick up Celica parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Toyota Celica parts has never been easier.

Advance Auto customers frequently search for the following types of Toyota Celica auto parts. Check out customer reviews and ratings, and compare prices on the following Toyota Celica parts:

People also search Advance Auto for these popular years of the Toyota Celica:

Toyota Celica Parts

KAI – Hood Panel (Part No.TO1230196)

KAI – Bumper Cover (Part No.TO1000208)

Dorman – Help – Window Handle Bone (Part No.84069)

StrongArm – Liftgate Lift Support: 16.48" Ext Length, 5.6" Travel, 130 Lbs of Force, 1 Pk (Part No.D6509L)

Dorman – Help – Interior Door Handle Front Left (Part No.81265)

Carquest Premium – Door Lock Switch (Part No.PDA1074)

Dorman – Help – Center Console Latch (Part No.74930)

Burco – Side View Replacement Mirror (Part No.2939)

Dorman – Toyota Bumper Retainer (Part No.963-631D)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)

Carquest Premium – Door Window Switch (Part No.WSC2668)

Dorman – Toyota Molding Retainer (Part No.963-533D)

Carquest Premium – Door Lock Kit (Part No.DLA2012)

Dorman – Hood Insulation Clip Head Dia. 1.18 In. Shank Long 0.65 In. Hole Dia. 0.26 In. (Part No.963-520)

Carquest Premium – Multi-Use Connector (Part No.PTC1427)

Carquest Premium – Door Jamb Switch (Part No.DJA1004)

Dorman – Push Rivet-Cowl Retainer – 7 mm Hole, 16 mm Stem, 18 mm Head (Part No.963-110D)

Burco – Side View Replacement Mirror (Part No.3677)

Burco – Side View Replacement Mirror (Part No.2579)

Dorman – Help – Fuel Door Spring (Part No.47208)

Dorman – Door Hinge Assembly Door Lower or Upper (Part No.924-991)

National – Multi Purpose Seal (Part No.2025)

Dorman – Transmission Output Speed Sensor (Part No.917-664)

Driveworks – Taper Bearing Set (Part No.S-A-6)

National – Multi-Purpose Seal (Part No.224026)

Dorman – Transmission Output Speed Sensor (Part No.917-603)

Felpro – Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket (Part No.TOS 18646)

ATP – AT SEAL DRIVE AXLE (Part No.RO-87)

National – Multi-Purpose Seal (Part No.710416)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 6.8 Quart (Part No.265-847)

National – Multi-Purpose Bearing (Part No.A-17)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Driveworks – Manual Transmission Output Shaft Seal (Part No.S-710319)

ATP – Shift Solenoid (Part No.RE-43)

National – Automatic Transmission Output Shaft Seal (Part No.710732)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Carquest – A/C Compressor Clutch Relay (Part No.R3130)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

Carquest Premium – Neutral Safety Switch (Part No.SBA4562)

National – Multi-Purpose Bearing (Part No.A-6)

Anchor – Transmission Mount: Left, 1 Piece (Part No.9801)

Dorman – Differential, Transmission Drain And Fill Plug Crush Washers, Size 18mm (Part No.652-531CD)

National – Multi-Purpose Bearing (Part No.A-2)

National – Multi-Purpose Seal (Part No.223010)

ATP – AT SEAL DRIVE AXLE (Part No.RO-54)

LuK – Clutch Master Cylinder (Part No.LMC483)

LuK – Clutch Master Cylinder (Part No.LMC331)

LuK – Clutch Kit: 9 1/4" Disc Diameter, 1 3/16" Input Shaft Diameter, 21 Tooth Spline (Part No.16-018)

LuK – Clutch Kit: 8 7/8" Disc Diameter, 1 1/16" Input Shaft Diameter, 20 Tooth Spline (Part No.16-072)

Carquest Wearever – Clutch Hydraulic Hose (Part No.BHA621882)

Carquest Wearever – Brake Hose Assembly (Part No.BHA106652)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA36742)

National – Clutch Release Bearing (Part No.614147)

National – Clutch Release Bearing (Part No.TO-1710)

National – Clutch Release Bearing (Part No.613010)

National – Multi-Purpose Bearing (Part No.303-CC)

Dorman – Help – Clutch Pilot Bearing (Part No.14671)

Dorman – Clutch Pilot Bearing (Part No.690-046.1)

LuK – Clutch Slave Cylinder (Part No.LSC215)

LuK – Clutch Slave Cylinder (Part No.LSC211)

LuK – Clutch Slave Cylinder (Part No.LSC259)

ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-544)

ATP – FLYWHEEL SHIM (Part No.TS-5)

ATP – FLYWHEEL SHIM (Part No.TS-4)

LuK – OE Quality Flywheel (Part No.LFW244)

ATP – Automatic Transmission Flex Plate (Part No.Z-422)

ATP – M/T FLYWHEEL (Part No.Z-317)

LuK – OE Quality Flywheel (Part No.LFW206)

ATP – ATP Automatic Transmission Flex Plate (Part No.Z-430)

LuK – OE Quality Flywheel (Part No.LFW212)

iKeyless – Toyota and Plymouth Non-Transponder Key (Part No.TOYKEY200)

iKeyless – Toyota Non-Transponder Key (Part No.TOYKEY201)

Rightline Gear – Sport Jr. Car Top Carrier (Part No.100S50)

Kat’s – Engine Heater Cartridge (Part No.11813)

Kat’s – Circulation Tank Heater; Thermostatically Controlled (Part No.13100)

Auto Ventshade (AVS) – Ventvisor Window Visors, In-Channel Mount, Smoke, Front, 2 Pc (Part No.192403)

Dorman – Help – Keyless Remote Case (Part No.13631)

Dorman – Help – Keyless Remote Cases Repair (Part No.13663)

Budge – Protector V Car Cover, Gray, Size 3 Fits Cars up to 16 ft. 8 in. L, 5 Layer All Weather (Part No.5LF3)