2003 Toyota Celica Body Parts
More 2003 Toyota Celica Body Parts Categories
If you’re looking for an original Body Parts replacement for a 2003 Toyota Celica, you can search through our selection below. You’ll also find aftermarket and OEM Body Parts to meet your needs.
Essential 2003 Toyota Celica Body Parts
KAI – Hood Panel (Part No.TO1230196)
from
$514.99
New Standard Replacement Hood Panel
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Help – Center Console Latch (Part No.74930)
from
$15.99
This center console latch is designed to match the fit and function of the original latch on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this center console latch is designed to match the fit and function of the original latch on specified vehicles
- Restores functionality – this latch is made to fit and fully restore part functionality after the original latch fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Center Console Latch (Part No.O60281329136DOR)
from
$12.86
Center Console Latch
Burco – Door Mirror Replacement Glass (Part No.2518)
from
$24.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.3677)
from
$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
K-Source – Replacement Glass (Part No.99142)
from
$10.99
Replacement Glass for 85-86 Nova; 85-88 Sprint; 70-81 Celica; 78-87 Corolla; 80-88 Tercel/ Wagon
Product Features:
See More
Product Features:
- The glass measures 3 13/16″ inches tall by 6 5/8″ inches wide and 7″ inches diagonally.
- Glass fits mirrors with manual remote, functions only.
- Step-by-step instructions for easy installation
- Mounting tape included for low-hassle stick-on installation
- Most economical way to replace cracked mirror glass versus the entire mirror housing
- Flat
Le Bra – Front End Cover (Part No.55303-01)
from
$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Covercraft – Custom Hood Protector (Part No.45901-01)
from
$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!
Product Features:
See More
Product Features:
- Protects vehicle’s hood from bugs or rock chips
- Low profile, aerodynamic design
- Installs in less than 5 minutes, no tools required
- Custom fit exactly to your vehicle
- Leather grain vinyl
Le Bra – Front End Cover (Part No.55016-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforate
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Carquest Premium – Deck Lid / Liftgate Ajar Switch (Part No.DJA1004)
from
$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Burco – Side View Replacement Mirror (Part No.2579)
from
$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Door Mirror Replacement Glass (Part No.3169)
from
$29.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.2939)
from
$34.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.2624)
from
$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Stabilus – Gas Charged Hatch Strut (Part No.O20701335145STB)
from
$43.62
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.
Product Features:
See More
Product Features:
- Restores the original opening and closing speeds of your hood, hatch or trunk
- Easy-to-install
- No special tools required
- Engineered for your application
- Easy lifting and reduced closing effort
- Consistent lifting force through 50,000 cycles
- Rust-resistant piston rod extends product life
- Dynamic damping technology, available on select lift supports
Atlas Lift – Lift Support (Part No.LS10535)
from
$29.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
StrongArm – Liftgate Lift Support: 16.48" Ext Length, 5.6" Travel, 130 Lbs of Force, 1 Pk (Part No.D6509L)
from
$44.49
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
- Non-Stick Back-Up Ring
- Hardened Nitride Plated Steel Shaft
- Engineered In USA To OE Quality Standards For Performance And Durability
- IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
- Easy To Install In Just Minutes. No Special Tools Required.
- Exact Fit Original Equipment Design Guarantees Correct Fit And Function
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
Atlas Lift – Lift Support (Part No.LS11167)
from
$31.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Dorman – Help – Interior Door Handle Front Left (Part No.81265)
from
$62.99
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
Dorman – Toyota Molding Retainer (Part No.963-533D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Popular 2003 Toyota Celica Body Parts Categories
2003 Toyota Celica Body Parts
You count on your 2003 Toyota Celica to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 19 Body Parts ranging in price from $4.49 to $514.99, you’re sure to find everything you need for your 2003 Toyota Celica.
Brands matter. If you want to shop a specific Body Parts brand, we stock 9 different brands like Dorman, StrongArm, and Burco. 2003 Toyota Celica Body Parts start as low as $4.49!
One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 22 extensive product reviews on 2003 Toyota Celica Body Parts.
Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 2003 Toyota Celica below to get started!
Top-Rated Body Parts Brands For Your 2003 Toyota Celica
Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Toyota Celica running right for years to come. In our inventory you’ll find brands like Dorman, StrongArm, Burco, and even more.
Popular StrongArm Body Parts
You’ll find popular StrongArm brand products across Vehicle Hoods. All are waiting to get your 2003 Toyota Celica back on the road. Some of the top-rated StrongArm products in these categories are:
from
$44.49
(4)
Liftgate Lift Support: 16.48" Ext Length, 5.6" Travel, 130 Lbs of Force, 1 Pk
Lift Supports
from
$44.49
(7)
Liftgate Lift Support: 16.48" Ext Length, 5.6" Travel, 130 Lbs of Force, 1 Pk
Lift Supports
FAQs for 2003 Toyota Celica Body Parts
What are the most purchased Body Parts for the 2003 Toyota Celica?
Out of 19 Body Parts for the 2003 Toyota Celica, the most popular in our inventory are:
